[Fri Oct 28 12:50:17 2011] Detection parameters:
  Position = (722.0, 210.0) = 8 48 27.49 44 56 5.3
  Extent = 1.0" x 0.6", rotation angle = 36 degrees
  Source counts = 23.1 +/- 5.1
  Background counts = 2.9
  Rate = 0.0002 +/- 4e-05

[Fri Oct 28 12:50:19 2011] Off-axis axis estimate = 5.08'
[Fri Oct 28 12:52:09 2011] Using EEF radius (= 1.21 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 12:52:09 2011] Initial guess for spatial extent in simple fitting = 1.21"
[Fri Oct 28 12:52:09 2011] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.024
[Fri Oct 28 12:52:09 2011] Giving source the simple spatial ID 14 for pass 0, mean size = 1.21"
[Fri Oct 28 12:52:10 2011] fullrun_ccd1_acisf00927_pi14-548_cl_pass0_src14.ximg exists
[Fri Oct 28 12:52:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00927_pi14-548_cl_pass0_src14.csv
[Fri Oct 28 12:52:10 2011] fullrun_ccd1_acisf00927_pi14-548_cl_pass0_src14_1.ximg exists
[Fri Oct 28 12:52:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00927_pi14-548_cl_pass0_src14.csv
[Fri Oct 28 12:52:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf00927_pi14-548_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf00927_pi14-548_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 12:52:11 2011] fullrun_ccd1_acisf00927_pi14-548_cl_pass0_tfrozen_src14.ximg exists
[Fri Oct 28 12:52:11 2011] fullrun_ccd1_acisf00927_pi14-548_cl_pass0_tfrozen_src14_1.ximg exists
[Fri Oct 28 12:52:11 2011] Fit fullrun_ccd1_acisf00927_pi14-548_cl_pass0_tfrozen_src14 appears to have run properly
[Fri Oct 28 12:52:31 2011] Spatial fit model total counts = 40.283800, observed total counts = 41.000000
[Fri Oct 28 12:52:31 2011] Offset between fit and detection position for source 11 = 1.978319 pixels
[Fri Oct 28 12:52:31 2011] 41.629960 total counts/ 6.478760 bgd. counts: snr = 13.810017
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 1.978319 pixels
  Position = (720.4, 211.1) = 8 48 27.58 44 56 5.6
  Extent = 1.4 (0.9-2.0)", rotation angle = 0
  Source counts = 35.2 +/- 6.5
  Background counts = 6.5
  Rate = 0.0003 +/- 5e-05
[Fri Oct 28 12:52:31 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 12:52:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 12:52:31 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 12:52:31 2011] Source does appear to be extended
[Fri Oct 28 12:52:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 12:53:07 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 28 12:53:07 2011] Initial guess for spatial extent in simple fitting = 1.44"
[Fri Oct 28 12:53:07 2011] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.041
[Fri Oct 28 12:53:07 2011] Giving source the simple spatial ID 14 for pass 1, mean size = 1.44"
[Fri Oct 28 12:53:08 2011] fullrun_ccd1_acisf00927_pi14-548_cl_pass1_src14.ximg exists
[Fri Oct 28 12:53:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00927_pi14-548_cl_pass1_src14.csv
[Fri Oct 28 12:53:08 2011] fullrun_ccd1_acisf00927_pi14-548_cl_pass1_src14_1.ximg exists
[Fri Oct 28 12:53:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00927_pi14-548_cl_pass1_src14.csv
[Fri Oct 28 12:53:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf00927_pi14-548_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf00927_pi14-548_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 12:53:08 2011] fullrun_ccd1_acisf00927_pi14-548_cl_pass1_tfrozen_src14.ximg exists
[Fri Oct 28 12:53:08 2011] fullrun_ccd1_acisf00927_pi14-548_cl_pass1_tfrozen_src14_1.ximg exists
[Fri Oct 28 12:53:08 2011] Fit fullrun_ccd1_acisf00927_pi14-548_cl_pass1_tfrozen_src14 appears to have run properly
[Fri Oct 28 12:53:28 2011] Spatial fit model total counts = 43.945100, observed total counts = 44.000000
[Fri Oct 28 12:53:28 2011] Offset between fit and detection position for source 11 = 0.667798 pixels
[Fri Oct 28 12:53:28 2011] 43.487000 total counts/ 14.301900 bgd. counts: snr = 7.717281
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.667798 pixels
  Position = (721.1, 211.1) = 8 48 27.55 44 56 5.6
  Extent = 1.3 (0.9-1.8)", rotation angle = 0
  Source counts = 29.2 +/- 6.6
  Background counts = 14.3
  Rate = 0.0002 +/- 5e-05
[Fri Oct 28 12:53:28 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 12:53:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 12:53:28 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 12:53:28 2011] Source does appear to be extended
[Fri Oct 28 12:53:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 12:55:08 2011] Not overwriting source region fullrun_ccd1_acisf00927_pi14-548_pass1_cl_src11_src.reg
[Fri Oct 28 12:55:08 2011] Extracting stamp from image fullrun_ccd1_acisf00927_pi14-548_cl_sm2.00.img.gz, (662, 152) - (781, 271)
[Fri Oct 28 12:55:08 2011] Writing fullrun_ccd1_acisf00927_pi14-548_pass1_cl_src11.gif
[Fri Oct 28 12:55:47 2011] ../../acisf00927/products/events/fullrun_ccd1_acisf00927_pi14-548_pass1_cl_src11_src.evt and ../../acisf00927/products/events/fullrun_ccd1_acisf00927_pi14-548_pass1_cl_src11_bgd.evt exist, delete to re-create
[Fri Oct 28 12:55:47 2011] Size of ../../acisf00927/products/events/fullrun_ccd1_acisf00927_pi14-548_pass1_cl_src11_src.evt.gz[events] = 41 counts
[Fri Oct 28 12:55:47 2011] Mean chipx,y = (542.85, 930.27)
[Fri Oct 28 12:55:47 2011] Mean tdetx,y = (4201.73, 4649.85)
[Fri Oct 28 12:55:47 2011] chipx,y range = (523.00-564.00, 912.00-955.00)
[Fri Oct 28 12:55:47 2011] Size of ../../acisf00927/products/events/fullrun_ccd1_acisf00927_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 82 counts
[Fri Oct 28 12:55:47 2011] ../../acisf00927/products/images/fullrun_ccd1_acisf00927_pi14-548_pass1_cl_src11_src.img and ../../acisf00927/products/images/fullrun_ccd1_acisf00927_pi14-548_pass1_cl_src11_bgd.img exist, delete to re-create
[Fri Oct 28 12:55:47 2011] ../../acisf00927/products/spectra/fullrun_ccd1_acisf00927_pi14-548_pass1_cl_src11_src.pi and ../../acisf00927/products/spectra/fullrun_ccd1_acisf00927_pi14-548_pass1_cl_src11_bgd.pi exist, delete to re-create
[Fri Oct 28 12:55:47 2011] Not generating rmf since there are only 29 counts
[Fri Oct 28 12:55:50 2011] ../../acisf00927/products/lightcurves/fullrun_ccd1_acisf00927_pi14-548_pass1_cl_src11_src.lc and ../../acisf00927/products/lightcurves/fullrun_ccd1_acisf00927_pi14-548_pass1_cl_src11_bgd.lc exist, delete to re-create
[Fri Oct 28 12:56:20 2011] 192.758
[Fri Oct 28 13:00:56 2011] Updating aperture counts using extracted products
[Fri Oct 28 13:00:56 2011] Error reading totcts from fullrun_ccd1_acisf00927_pi14-548_pass1_cl_src11_src.pi.gz
[Fri Oct 28 13:00:57 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 13:00:57 2011] Using photon index=1.80, rate=0.000233, arf fullrun_ccd1_acisf00927_pi14-548_pass1_cl_src11.arf
[Fri Oct 28 13:00:57 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 13:00:57 2011] Updating source flux to 2.5e-15
[Fri Oct 28 13:01:21 2011] Source 11 has fewer than 100.000000 counts, skipping spectral fitting