[Mon Oct 10 01:10:41 2011] Detection parameters:
  Position = (717.5, 899.4) = 18 1 33.50 13 50 53.5
  Extent = 0.6" x 0.5", rotation angle = 102 degrees
  Source counts = 18.9 +/- 4.5
  Background counts = 1.1
  Rate = 0.0009 +/- 0.0002

[Mon Oct 10 01:10:42 2011] Off-axis axis estimate = 1.53'
[Mon Oct 10 01:11:07 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Mon Oct 10 01:11:07 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Mon Oct 10 01:11:07 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.329
[Mon Oct 10 01:11:07 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 0.39"
[Mon Oct 10 01:11:07 2011] fullrun_ccd7_acisf09263_pi14-548_cl_pass0_src10.ximg exists
[Mon Oct 10 01:11:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf09263_pi14-548_cl_pass0_src10.csv
[Mon Oct 10 01:11:07 2011] fullrun_ccd7_acisf09263_pi14-548_cl_pass0_src10_1.ximg exists
[Mon Oct 10 01:11:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf09263_pi14-548_cl_pass0_src10.csv
[Mon Oct 10 01:11:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf09263_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf09263_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 01:11:08 2011] fullrun_ccd7_acisf09263_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Mon Oct 10 01:11:08 2011] fullrun_ccd7_acisf09263_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Mon Oct 10 01:11:08 2011] Fit fullrun_ccd7_acisf09263_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Mon Oct 10 01:11:15 2011] Spatial fit model total counts = 20.445500, observed total counts = 22.000000
[Mon Oct 10 01:11:15 2011] Offset between fit and detection position for source 6 = 0.659523 pixels
[Mon Oct 10 01:11:15 2011] 20.890410 total counts/ 1.801510 bgd. counts: snr = 14.222062
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.659523 pixels
  Position = (718.1, 899.6) = 18 1 33.50 13 50 53.3
  Extent = 0.6 (0.6-0.9)", rotation angle = 0
  Source counts = 19.1 +/- 4.6
  Background counts = 1.8
  Rate = 0.001 +/- 0.0002
[Mon Oct 10 01:11:15 2011] Vigneting correction estimate = 1.000000
[Mon Oct 10 01:11:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 10 01:11:15 2011] Assessing source extent using major axis lower bound
[Mon Oct 10 01:11:15 2011] Source does appear to be extended
[Mon Oct 10 01:11:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 10 01:11:32 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 10 01:11:32 2011] Initial guess for spatial extent in simple fitting = 0.63"
[Mon Oct 10 01:11:32 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.953
[Mon Oct 10 01:11:32 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 0.63"
[Mon Oct 10 01:11:33 2011] fullrun_ccd7_acisf09263_pi14-548_cl_pass1_src10.ximg exists
[Mon Oct 10 01:11:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf09263_pi14-548_cl_pass1_src10.csv
[Mon Oct 10 01:11:33 2011] fullrun_ccd7_acisf09263_pi14-548_cl_pass1_src10_1.ximg exists
[Mon Oct 10 01:11:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf09263_pi14-548_cl_pass1_src10.csv
[Mon Oct 10 01:11:33 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf09263_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf09263_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 01:11:34 2011] fullrun_ccd7_acisf09263_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Mon Oct 10 01:11:34 2011] fullrun_ccd7_acisf09263_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Mon Oct 10 01:11:34 2011] Fit fullrun_ccd7_acisf09263_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Mon Oct 10 01:11:39 2011] Spatial fit model total counts = 20.814400, observed total counts = 22.000000
[Mon Oct 10 01:11:39 2011] Offset between fit and detection position for source 6 = 0.049953 pixels
[Mon Oct 10 01:11:39 2011] 20.962400 total counts/ 0.000000 bgd. counts: snr = 1058589618166668.500000
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.049953 pixels
  Position = (718.1, 899.7) = 18 1 33.50 13 50 53.4
  Extent = 0.7 (0.6-0.9)", rotation angle = 0
  Source counts = 21.0 +/- 4.6
  Background counts = 0.0
  Rate = 0.001 +/- 0.0002
[Mon Oct 10 01:11:39 2011] Vigneting correction estimate = 1.000000
[Mon Oct 10 01:11:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 10 01:11:39 2011] Assessing source extent using major axis lower bound
[Mon Oct 10 01:11:39 2011] Source does appear to be extended
[Mon Oct 10 01:11:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 10 01:12:17 2011] Not overwriting source region fullrun_ccd7_acisf09263_pi14-548_pass1_cl_src6_src.reg
[Mon Oct 10 01:12:17 2011] Extracting stamp from image fullrun_ccd7_acisf09263_pi14-548_cl_sm2.00.img.gz, (687, 868) - (749, 931)
[Mon Oct 10 01:12:17 2011] Writing fullrun_ccd7_acisf09263_pi14-548_pass1_cl_src6.gif
[Mon Oct 10 01:12:46 2011] ../../acisf09263/products/events/fullrun_ccd7_acisf09263_pi14-548_pass1_cl_src6_src.evt and ../../acisf09263/products/events/fullrun_ccd7_acisf09263_pi14-548_pass1_cl_src6_bgd.evt exist, delete to re-create
[Mon Oct 10 01:12:46 2011] Size of ../../acisf09263/products/events/fullrun_ccd7_acisf09263_pi14-548_pass1_cl_src6_src.evt.gz[events] = 20 counts
[Mon Oct 10 01:12:46 2011] Mean chipx,y = (358.95, 413.90)
[Mon Oct 10 01:12:46 2011] Mean tdetx,y = (4275.95, 2115.95)
[Mon Oct 10 01:12:46 2011] chipx,y range = (341.00-373.00, 397.00-427.00)
[Mon Oct 10 01:12:46 2011] Size of ../../acisf09263/products/events/fullrun_ccd7_acisf09263_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 19 counts
[Mon Oct 10 01:12:46 2011] ../../acisf09263/products/images/fullrun_ccd7_acisf09263_pi14-548_pass1_cl_src6_src.img and ../../acisf09263/products/images/fullrun_ccd7_acisf09263_pi14-548_pass1_cl_src6_bgd.img exist, delete to re-create
[Mon Oct 10 01:12:46 2011] ../../acisf09263/products/spectra/fullrun_ccd7_acisf09263_pi14-548_pass1_cl_src6_src.pi and ../../acisf09263/products/spectra/fullrun_ccd7_acisf09263_pi14-548_pass1_cl_src6_bgd.pi exist, delete to re-create
[Mon Oct 10 01:12:46 2011] Not generating rmf since there are only 20 counts
[Mon Oct 10 01:12:49 2011] ../../acisf09263/products/lightcurves/fullrun_ccd7_acisf09263_pi14-548_pass1_cl_src6_src.lc and ../../acisf09263/products/lightcurves/fullrun_ccd7_acisf09263_pi14-548_pass1_cl_src6_bgd.lc exist, delete to re-create
[Mon Oct 10 01:13:17 2011] 234.128
[Mon Oct 10 01:13:20 2011] Updating aperture counts using extracted products
[Mon Oct 10 01:13:20 2011] Error reading totcts from fullrun_ccd7_acisf09263_pi14-548_pass1_cl_src6_src.pi.gz
[Mon Oct 10 01:13:20 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 10 01:13:20 2011] Using photon index=1.80, rate=0.00105, arf fullrun_ccd7_acisf09263_pi14-548_pass1_cl_src6.arf
[Mon Oct 10 01:13:20 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 10 01:13:20 2011] Updating source flux to 8.1e-15
[Mon Oct 10 01:13:26 2011] Source 6 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Oct 10 01:13:27 2011] acisf09263/analysis//spectral/fullrun_ccd7_acisf09263_pi14-548_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete