[Sat Oct 15 09:18:54 2011] Detection parameters:
  Position = (416.1, 520.5) = 9 9 15.71 10 57 15.5
  Extent = 0.6" x 0.5", rotation angle = 102 degrees
  Source counts = 16.8 +/- 4.4
  Background counts = 2.2
  Rate = 0.0006 +/- 0.0001

[Sat Oct 15 09:18:55 2011] Off-axis axis estimate = 4.75'
[Sat Oct 15 09:19:39 2011] Using EEF radius (= 1.08 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 09:19:39 2011] Initial guess for spatial extent in simple fitting = 1.08"
[Sat Oct 15 09:19:39 2011] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.028
[Sat Oct 15 09:19:39 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 1.08"
[Sat Oct 15 09:19:40 2011] fullrun_ccd3_acisf00924_pi14-548_cl_pass0_src10.ximg exists
[Sat Oct 15 09:19:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00924_pi14-548_cl_pass0_src10.csv
[Sat Oct 15 09:19:40 2011] fullrun_ccd3_acisf00924_pi14-548_cl_pass0_src10_1.ximg exists
[Sat Oct 15 09:19:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00924_pi14-548_cl_pass0_src10.csv
[Sat Oct 15 09:19:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00924_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00924_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 09:19:40 2011] fullrun_ccd3_acisf00924_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Sat Oct 15 09:19:40 2011] fullrun_ccd3_acisf00924_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Sat Oct 15 09:19:40 2011] Fit fullrun_ccd3_acisf00924_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Sat Oct 15 09:19:52 2011] Spatial fit model total counts = 24.907500, observed total counts = 25.000000
[Sat Oct 15 09:19:52 2011] Offset between fit and detection position for source 3 = 0.409602 pixels
[Sat Oct 15 09:19:52 2011] 25.645500 total counts/ 10.282200 bgd. counts: snr = 4.791169
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.409602 pixels
  Position = (416.5, 520.6) = 9 9 15.71 10 57 15.3
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 15.4 +/- 5.1
  Background counts = 10.3
  Rate = 0.0005 +/- 0.0002
[Sat Oct 15 09:19:52 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 09:19:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 09:19:52 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 09:19:52 2011] Source does appear to be extended
[Sat Oct 15 09:19:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 09:20:13 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 15 09:20:13 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Sat Oct 15 09:20:13 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.345
[Sat Oct 15 09:20:13 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 0.39"
[Sat Oct 15 09:20:14 2011] fullrun_ccd3_acisf00924_pi14-548_cl_pass1_src10.ximg exists
[Sat Oct 15 09:20:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00924_pi14-548_cl_pass1_src10.csv
[Sat Oct 15 09:20:14 2011] fullrun_ccd3_acisf00924_pi14-548_cl_pass1_src10_1.ximg exists
[Sat Oct 15 09:20:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00924_pi14-548_cl_pass1_src10.csv
[Sat Oct 15 09:20:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00924_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00924_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 09:20:14 2011] fullrun_ccd3_acisf00924_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Sat Oct 15 09:20:14 2011] fullrun_ccd3_acisf00924_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Sat Oct 15 09:20:14 2011] Fit fullrun_ccd3_acisf00924_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Sat Oct 15 09:20:24 2011] Spatial fit model total counts = 24.895700, observed total counts = 25.000000
[Sat Oct 15 09:20:24 2011] Offset between fit and detection position for source 3 = 0.003662 pixels
[Sat Oct 15 09:20:24 2011] 25.629700 total counts/ 10.313500 bgd. counts: snr = 4.769227
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.003662 pixels
  Position = (416.5, 520.6) = 9 9 15.71 10 57 15.3
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 15.3 +/- 5.1
  Background counts = 10.3
  Rate = 0.0005 +/- 0.0002
[Sat Oct 15 09:20:24 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 09:20:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 09:20:24 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 09:20:24 2011] Source does appear to be extended
[Sat Oct 15 09:20:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 09:23:44 2011] Not overwriting source region fullrun_ccd3_acisf00924_pi14-548_pass1_cl_src3_src.reg
[Sat Oct 15 09:23:44 2011] Extracting stamp from image fullrun_ccd3_acisf00924_pi14-548_cl_sm2.00.img.gz, (399, 503) - (434, 538)
[Sat Oct 15 09:23:44 2011] Writing fullrun_ccd3_acisf00924_pi14-548_pass1_cl_src3.gif
[Sat Oct 15 09:24:09 2011] ../../acisf00924/products/events/fullrun_ccd3_acisf00924_pi14-548_pass1_cl_src3_src.evt and ../../acisf00924/products/events/fullrun_ccd3_acisf00924_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Sat Oct 15 09:24:09 2011] Size of ../../acisf00924/products/events/fullrun_ccd3_acisf00924_pi14-548_pass1_cl_src3_src.evt.gz[events] = 17 counts
[Sat Oct 15 09:24:09 2011] Mean chipx,y = (721.12, 478.88)
[Sat Oct 15 09:24:09 2011] Mean tdetx,y = (4653.12, 3782.12)
[Sat Oct 15 09:24:09 2011] chipx,y range = (705.00-737.00, 458.00-493.00)
[Sat Oct 15 09:24:09 2011] Size of ../../acisf00924/products/events/fullrun_ccd3_acisf00924_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 16 counts
[Sat Oct 15 09:24:09 2011] ../../acisf00924/products/images/fullrun_ccd3_acisf00924_pi14-548_pass1_cl_src3_src.img and ../../acisf00924/products/images/fullrun_ccd3_acisf00924_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Sat Oct 15 09:24:09 2011] ../../acisf00924/products/spectra/fullrun_ccd3_acisf00924_pi14-548_pass1_cl_src3_src.pi and ../../acisf00924/products/spectra/fullrun_ccd3_acisf00924_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Sat Oct 15 09:24:09 2011] Not generating rmf since there are only 15 counts
[Sat Oct 15 09:24:11 2011] ../../acisf00924/products/lightcurves/fullrun_ccd3_acisf00924_pi14-548_pass1_cl_src3_src.lc and ../../acisf00924/products/lightcurves/fullrun_ccd3_acisf00924_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Sat Oct 15 09:24:22 2011] 194.883
[Sat Oct 15 09:24:33 2011] Updating aperture counts using extracted products
[Sat Oct 15 09:24:33 2011] Error reading totcts from fullrun_ccd3_acisf00924_pi14-548_pass1_cl_src3_src.pi.gz
[Sat Oct 15 09:24:33 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 09:24:33 2011] Using photon index=1.80, rate=0.000515, arf fullrun_ccd3_acisf00924_pi14-548_pass1_cl_src3.arf
[Sat Oct 15 09:24:33 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 15 09:24:33 2011] Updating source flux to 5.5e-15
[Sat Oct 15 09:24:56 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Oct 15 09:24:57 2011] acisf00924/analysis//spectral/fullrun_ccd3_acisf00924_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete