[Sat Oct 15 09:18:55 2011] Detection parameters:
  Position = (428.3, 341.4) = 9 9 15.30 10 55 47.4
  Extent = 1.6" x 1.0", rotation angle = 59 degrees
  Source counts = 79.2 +/- 9.2
  Background counts = 4.8
  Rate = 0.003 +/- 0.0003

[Sat Oct 15 09:18:55 2011] Off-axis axis estimate = 6.02'
[Sat Oct 15 09:19:39 2011] Using EEF radius (= 1.64 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 09:19:39 2011] Initial guess for spatial extent in simple fitting = 1.64"
[Sat Oct 15 09:19:39 2011] source mask rpix=3.3, npix_max = 58, mask sum = 56, frac = 0.953
[Sat Oct 15 09:19:39 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 1.64"
[Sat Oct 15 09:19:40 2011] fullrun_ccd3_acisf00924_pi14-548_cl_pass0_src2.ximg exists
[Sat Oct 15 09:19:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00924_pi14-548_cl_pass0_src2.csv
[Sat Oct 15 09:19:40 2011] fullrun_ccd3_acisf00924_pi14-548_cl_pass0_src2_1.ximg exists
[Sat Oct 15 09:19:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00924_pi14-548_cl_pass0_src2.csv
[Sat Oct 15 09:19:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00924_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00924_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 09:19:40 2011] fullrun_ccd3_acisf00924_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Sat Oct 15 09:19:40 2011] fullrun_ccd3_acisf00924_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Oct 15 09:19:40 2011] Fit fullrun_ccd3_acisf00924_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Sat Oct 15 09:19:52 2011] Spatial fit model total counts = 79.961800, observed total counts = 80.000000
[Sat Oct 15 09:19:52 2011] Offset between fit and detection position for source 18 = 0.813077 pixels
[Sat Oct 15 09:19:52 2011] 79.991000 total counts/ 19.889900 bgd. counts: snr = 13.476159
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.813077 pixels
  Position = (429.1, 341.2) = 9 9 15.29 10 55 47.1
  Extent = 1.1 (0.8-1.5)", rotation angle = 0
  Source counts = 60.1 +/- 8.9
  Background counts = 19.9
  Rate = 0.002 +/- 0.0003
[Sat Oct 15 09:19:52 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 09:19:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 09:19:52 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 09:19:52 2011] Source does appear to be extended
[Sat Oct 15 09:19:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 09:20:13 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 15 09:20:13 2011] Initial guess for spatial extent in simple fitting = 1.06"
[Sat Oct 15 09:20:13 2011] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.057
[Sat Oct 15 09:20:13 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 1.06"
[Sat Oct 15 09:20:14 2011] fullrun_ccd3_acisf00924_pi14-548_cl_pass1_src2.ximg exists
[Sat Oct 15 09:20:14 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf00924_pi14-548_cl_pass1_src2.csv
[Sat Oct 15 09:20:14 2011] fullrun_ccd3_acisf00924_pi14-548_cl_pass1_src2_1.ximg exists
[Sat Oct 15 09:20:14 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf00924_pi14-548_cl_pass1_src2.csv
[Sat Oct 15 09:20:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00924_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00924_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 09:20:14 2011] fullrun_ccd3_acisf00924_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Sat Oct 15 09:20:14 2011] fullrun_ccd3_acisf00924_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Oct 15 09:20:14 2011] Fit fullrun_ccd3_acisf00924_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Sat Oct 15 09:20:24 2011] Spatial fit model total counts = 76.997500, observed total counts = 77.000000
[Sat Oct 15 09:20:24 2011] Offset between fit and detection position for source 18 = 0.182222 pixels
[Sat Oct 15 09:20:24 2011] 77.076400 total counts/ 27.561500 bgd. counts: snr = 9.431581
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.182222 pixels
  Position = (429.3, 341.2) = 9 9 15.29 10 55 47.1
  Extent = 0.8 (0.7-1.2)", rotation angle = 0
  Source counts = 49.5 +/- 8.8
  Background counts = 27.6
  Rate = 0.002 +/- 0.0003
[Sat Oct 15 09:20:24 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 09:20:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 09:20:24 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 09:20:24 2011] Source does appear to be extended
[Sat Oct 15 09:20:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 09:23:44 2011] Not overwriting source region fullrun_ccd3_acisf00924_pi14-548_pass1_cl_src18_src.reg
[Sat Oct 15 09:23:44 2011] Extracting stamp from image fullrun_ccd3_acisf00924_pi14-548_cl_sm2.00.img.gz, (391, 303) - (468, 380)
[Sat Oct 15 09:23:44 2011] Writing fullrun_ccd3_acisf00924_pi14-548_pass1_cl_src18.gif
[Sat Oct 15 09:23:47 2011] ../../acisf00924/products/events/fullrun_ccd3_acisf00924_pi14-548_pass1_cl_src18_src.evt and ../../acisf00924/products/events/fullrun_ccd3_acisf00924_pi14-548_pass1_cl_src18_bgd.evt exist, delete to re-create
[Sat Oct 15 09:23:47 2011] Size of ../../acisf00924/products/events/fullrun_ccd3_acisf00924_pi14-548_pass1_cl_src18_src.evt.gz[events] = 68 counts
[Sat Oct 15 09:23:47 2011] Mean chipx,y = (747.93, 298.62)
[Sat Oct 15 09:23:47 2011] Mean tdetx,y = (4833.38, 3808.93)
[Sat Oct 15 09:23:47 2011] chipx,y range = (731.00-767.00, 277.00-318.00)
[Sat Oct 15 09:23:47 2011] Size of ../../acisf00924/products/events/fullrun_ccd3_acisf00924_pi14-548_pass1_cl_src18_bgd.evt.gz[events] = 14 counts
[Sat Oct 15 09:23:47 2011] ../../acisf00924/products/images/fullrun_ccd3_acisf00924_pi14-548_pass1_cl_src18_src.img and ../../acisf00924/products/images/fullrun_ccd3_acisf00924_pi14-548_pass1_cl_src18_bgd.img exist, delete to re-create
[Sat Oct 15 09:23:47 2011] ../../acisf00924/products/spectra/fullrun_ccd3_acisf00924_pi14-548_pass1_cl_src18_src.pi and ../../acisf00924/products/spectra/fullrun_ccd3_acisf00924_pi14-548_pass1_cl_src18_bgd.pi exist, delete to re-create
[Sat Oct 15 09:23:47 2011] Not generating rmf since there are only 49 counts
[Sat Oct 15 09:23:50 2011] ../../acisf00924/products/lightcurves/fullrun_ccd3_acisf00924_pi14-548_pass1_cl_src18_src.lc and ../../acisf00924/products/lightcurves/fullrun_ccd3_acisf00924_pi14-548_pass1_cl_src18_bgd.lc exist, delete to re-create
[Sat Oct 15 09:24:22 2011] 189.096
[Sat Oct 15 09:24:33 2011] Updating aperture counts using extracted products
[Sat Oct 15 09:24:33 2011] Error reading totcts from fullrun_ccd3_acisf00924_pi14-548_pass1_cl_src18_src.pi.gz
[Sat Oct 15 09:24:33 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 09:24:33 2011] Using photon index=1.80, rate=0.00166, arf fullrun_ccd3_acisf00924_pi14-548_pass1_cl_src18.arf
[Sat Oct 15 09:24:33 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 15 09:24:33 2011] Updating source flux to 1.8e-14
[Sat Oct 15 09:24:56 2011] Source 18 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Oct 15 09:24:57 2011] acisf00924/analysis//spectral/fullrun_ccd3_acisf00924_pi14-548_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete