[Sat Oct 15 09:18:54 2011] Detection parameters:
  Position = (252.2, 30.6) = 9 9 28.83 11 1 31.0
  Extent = 0.5" x 0.5", rotation angle = 139 degrees
  Source counts = 88.3 +/- 9.4
  Background counts = 0.7
  Rate = 0.003 +/- 0.0003

[Sat Oct 15 09:18:54 2011] Off-axis axis estimate = 0.60'
[Sat Oct 15 09:19:39 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 09:19:39 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Sat Oct 15 09:19:39 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.355
[Sat Oct 15 09:19:39 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.39"
[Sat Oct 15 09:19:39 2011] fullrun_ccd2_acisf00924_pi14-548_cl_pass0_src1.ximg exists
[Sat Oct 15 09:19:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00924_pi14-548_cl_pass0_src1.csv
[Sat Oct 15 09:19:39 2011] fullrun_ccd2_acisf00924_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Oct 15 09:19:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00924_pi14-548_cl_pass0_src1.csv
[Sat Oct 15 09:19:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf00924_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf00924_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 09:19:39 2011] fullrun_ccd2_acisf00924_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Oct 15 09:19:39 2011] fullrun_ccd2_acisf00924_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Oct 15 09:19:39 2011] Fit fullrun_ccd2_acisf00924_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Oct 15 09:19:50 2011] Spatial fit model total counts = 92.673400, observed total counts = 90.000000
[Sat Oct 15 09:19:50 2011] Offset between fit and detection position for source 17 = 0.730015 pixels
[Sat Oct 15 09:19:50 2011] 92.942810 total counts/ 3.538210 bgd. counts: snr = 47.530027
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.730015 pixels
  Position = (252.7, 31.2) = 9 9 28.83 11 1 31.0
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 89.4 +/- 9.6
  Background counts = 3.5
  Rate = 0.003 +/- 0.0003
[Sat Oct 15 09:19:50 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 09:19:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 09:19:50 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 09:19:50 2011] Source does appear to be extended
[Sat Oct 15 09:19:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 09:20:12 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 15 09:20:12 2011] Initial guess for spatial extent in simple fitting = 0.41"
[Sat Oct 15 09:20:12 2011] source mask rpix=0.8, npix_max = 7, mask sum = 9, frac = 1.264
[Sat Oct 15 09:20:12 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.41"
[Sat Oct 15 09:20:13 2011] fullrun_ccd2_acisf00924_pi14-548_cl_pass1_src1.ximg exists
[Sat Oct 15 09:20:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00924_pi14-548_cl_pass1_src1.csv
[Sat Oct 15 09:20:13 2011] fullrun_ccd2_acisf00924_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Oct 15 09:20:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00924_pi14-548_cl_pass1_src1.csv
[Sat Oct 15 09:20:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf00924_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf00924_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 09:20:13 2011] fullrun_ccd2_acisf00924_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Oct 15 09:20:13 2011] fullrun_ccd2_acisf00924_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Oct 15 09:20:13 2011] Fit fullrun_ccd2_acisf00924_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Oct 15 09:20:22 2011] Spatial fit model total counts = 90.076800, observed total counts = 90.000000
[Sat Oct 15 09:20:22 2011] Offset between fit and detection position for source 17 = 0.005761 pixels
[Sat Oct 15 09:20:22 2011] 89.711720 total counts/ 2.221920 bgd. counts: snr = 58.693933
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.005761 pixels
  Position = (252.7, 31.2) = 9 9 28.83 11 1 31.0
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 87.5 +/- 9.5
  Background counts = 2.2
  Rate = 0.003 +/- 0.0003
[Sat Oct 15 09:20:22 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 09:20:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 09:20:22 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 09:20:22 2011] Source does appear to be extended
[Sat Oct 15 09:20:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 09:22:54 2011] Not overwriting source region fullrun_ccd2_acisf00924_pi14-548_pass1_cl_src17_src.reg
[Sat Oct 15 09:22:54 2011] Extracting stamp from image fullrun_ccd2_acisf00924_pi14-548_cl_sm2.00.img.gz, (234, 12) - (272, 50)
[Sat Oct 15 09:22:54 2011] Writing fullrun_ccd2_acisf00924_pi14-548_pass1_cl_src17.gif
[Sat Oct 15 09:22:55 2011] ../../acisf00924/products/events/fullrun_ccd2_acisf00924_pi14-548_pass1_cl_src17_src.evt and ../../acisf00924/products/events/fullrun_ccd2_acisf00924_pi14-548_pass1_cl_src17_bgd.evt exist, delete to re-create
[Sat Oct 15 09:22:55 2011] Size of ../../acisf00924/products/events/fullrun_ccd2_acisf00924_pi14-548_pass1_cl_src17_src.evt.gz[events] = 88 counts
[Sat Oct 15 09:22:55 2011] Mean chipx,y = (38.77, 998.55)
[Sat Oct 15 09:22:55 2011] Mean tdetx,y = (4059.55, 4047.23)
[Sat Oct 15 09:22:55 2011] chipx,y range = (21.00-55.00, 983.00-1017.00)
[Sat Oct 15 09:22:55 2011] Size of ../../acisf00924/products/events/fullrun_ccd2_acisf00924_pi14-548_pass1_cl_src17_bgd.evt.gz[events] = 3 counts
[Sat Oct 15 09:22:55 2011] ../../acisf00924/products/images/fullrun_ccd2_acisf00924_pi14-548_pass1_cl_src17_src.img and ../../acisf00924/products/images/fullrun_ccd2_acisf00924_pi14-548_pass1_cl_src17_bgd.img exist, delete to re-create
[Sat Oct 15 09:22:55 2011] ../../acisf00924/products/spectra/fullrun_ccd2_acisf00924_pi14-548_pass1_cl_src17_src.pi and ../../acisf00924/products/spectra/fullrun_ccd2_acisf00924_pi14-548_pass1_cl_src17_bgd.pi exist, delete to re-create
[Sat Oct 15 09:22:55 2011] Not generating rmf since there are only 87 counts
[Sat Oct 15 09:22:58 2011] ../../acisf00924/products/lightcurves/fullrun_ccd2_acisf00924_pi14-548_pass1_cl_src17_src.lc and ../../acisf00924/products/lightcurves/fullrun_ccd2_acisf00924_pi14-548_pass1_cl_src17_bgd.lc exist, delete to re-create
[Sat Oct 15 09:23:43 2011] 197.789
[Sat Oct 15 09:24:32 2011] Updating aperture counts using extracted products
[Sat Oct 15 09:24:32 2011] Error reading totcts from fullrun_ccd2_acisf00924_pi14-548_pass1_cl_src17_src.pi.gz
[Sat Oct 15 09:24:33 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 09:24:33 2011] Using photon index=1.80, rate=0.00294, arf fullrun_ccd2_acisf00924_pi14-548_pass1_cl_src17.arf
[Sat Oct 15 09:24:33 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 15 09:24:33 2011] Updating source flux to 3.1e-14
[Sat Oct 15 09:24:55 2011] Source 17 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Oct 15 09:24:56 2011] acisf00924/analysis//spectral/fullrun_ccd2_acisf00924_pi14-548_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete