[Sat Oct 15 09:18:52 2011] Detection parameters:
  Position = (675.5, 1098.3) = 9 9 41.09 11 0 3.7
  Extent = 0.5" x 0.5", rotation angle = 20 degrees
  Source counts = 113.4 +/- 10.7
  Background counts = 1.6
  Rate = 0.004 +/- 0.0004

[Sat Oct 15 09:18:53 2011] Off-axis axis estimate = 3.40'
[Sat Oct 15 09:19:37 2011] Using EEF radius (= 0.67 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 09:19:37 2011] Initial guess for spatial extent in simple fitting = 0.67"
[Sat Oct 15 09:19:37 2011] source mask rpix=1.4, npix_max = 13, mask sum = 12, frac = 0.869
[Sat Oct 15 09:19:37 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.67"
[Sat Oct 15 09:19:38 2011] fullrun_ccd1_acisf00924_pi14-548_cl_pass0_src3.ximg exists
[Sat Oct 15 09:19:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00924_pi14-548_cl_pass0_src3.csv
[Sat Oct 15 09:19:38 2011] fullrun_ccd1_acisf00924_pi14-548_cl_pass0_src3_1.ximg exists
[Sat Oct 15 09:19:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00924_pi14-548_cl_pass0_src3.csv
[Sat Oct 15 09:19:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf00924_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf00924_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 09:19:38 2011] fullrun_ccd1_acisf00924_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Sat Oct 15 09:19:38 2011] fullrun_ccd1_acisf00924_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Oct 15 09:19:38 2011] Fit fullrun_ccd1_acisf00924_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Oct 15 09:19:49 2011] Spatial fit model total counts = 112.182000, observed total counts = 120.000000
[Sat Oct 15 09:19:49 2011] Offset between fit and detection position for source 12 = 0.520885 pixels
[Sat Oct 15 09:19:49 2011] 109.577825 total counts/ 0.346825 bgd. counts: snr = 185.477277
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.520885 pixels
  Position = (675.9, 1098.7) = 9 9 41.09 11 0 3.6
  Extent = 0.6 (0.6-0.7)", rotation angle = 0
  Source counts = 109.2 +/- 10.5
  Background counts = 0.3
  Rate = 0.004 +/- 0.0004
[Sat Oct 15 09:19:49 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 09:19:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 09:19:49 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 09:19:49 2011] Source does appear to be extended
[Sat Oct 15 09:19:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 09:20:11 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 15 09:20:11 2011] Initial guess for spatial extent in simple fitting = 0.62"
[Sat Oct 15 09:20:11 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.965
[Sat Oct 15 09:20:11 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.62"
[Sat Oct 15 09:20:12 2011] fullrun_ccd1_acisf00924_pi14-548_cl_pass1_src3.ximg exists
[Sat Oct 15 09:20:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00924_pi14-548_cl_pass1_src3.csv
[Sat Oct 15 09:20:12 2011] fullrun_ccd1_acisf00924_pi14-548_cl_pass1_src3_1.ximg exists
[Sat Oct 15 09:20:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00924_pi14-548_cl_pass1_src3.csv
[Sat Oct 15 09:20:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf00924_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf00924_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 09:20:12 2011] fullrun_ccd1_acisf00924_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Sat Oct 15 09:20:12 2011] fullrun_ccd1_acisf00924_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Oct 15 09:20:12 2011] Fit fullrun_ccd1_acisf00924_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Oct 15 09:20:21 2011] Spatial fit model total counts = 114.790000, observed total counts = 120.000000
[Sat Oct 15 09:20:21 2011] Offset between fit and detection position for source 12 = 0.060287 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.060287 pixels
  Position = (675.9, 1098.7) = 9 9 41.09 11 0 3.7
  Extent = 0.6 (0.6-0.7)", rotation angle = 0
  Source counts = 111.8 +/- 10.6
  Background counts = 0.0
  Rate = 0.004 +/- 0.0004
[Sat Oct 15 09:20:21 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 09:20:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 09:20:21 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 09:20:21 2011] Source does appear to be extended
[Sat Oct 15 09:20:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 09:21:36 2011] Not overwriting source region fullrun_ccd1_acisf00924_pi14-548_pass1_cl_src12_src.reg
[Sat Oct 15 09:21:36 2011] Extracting stamp from image fullrun_ccd1_acisf00924_pi14-548_cl_sm2.00.img.gz, (647, 1069) - (705, 1128)
[Sat Oct 15 09:21:36 2011] Writing fullrun_ccd1_acisf00924_pi14-548_pass1_cl_src12.gif
[Sat Oct 15 09:21:43 2011] ../../acisf00924/products/events/fullrun_ccd1_acisf00924_pi14-548_pass1_cl_src12_src.evt and ../../acisf00924/products/events/fullrun_ccd1_acisf00924_pi14-548_pass1_cl_src12_bgd.evt exist, delete to re-create
[Sat Oct 15 09:21:43 2011] Size of ../../acisf00924/products/events/fullrun_ccd1_acisf00924_pi14-548_pass1_cl_src12_src.evt.gz[events] = 114 counts
[Sat Oct 15 09:21:43 2011] Mean chipx,y = (340.55, 981.18)
[Sat Oct 15 09:21:43 2011] Mean tdetx,y = (4150.82, 4447.55)
[Sat Oct 15 09:21:43 2011] chipx,y range = (321.00-359.00, 964.00-999.00)
[Sat Oct 15 09:21:44 2011] Size of ../../acisf00924/products/events/fullrun_ccd1_acisf00924_pi14-548_pass1_cl_src12_bgd.evt.gz[events] = 5 counts
[Sat Oct 15 09:21:44 2011] ../../acisf00924/products/images/fullrun_ccd1_acisf00924_pi14-548_pass1_cl_src12_src.img and ../../acisf00924/products/images/fullrun_ccd1_acisf00924_pi14-548_pass1_cl_src12_bgd.img exist, delete to re-create
[Sat Oct 15 09:21:44 2011] ../../acisf00924/products/spectra/fullrun_ccd1_acisf00924_pi14-548_pass1_cl_src12_src.pi and ../../acisf00924/products/spectra/fullrun_ccd1_acisf00924_pi14-548_pass1_cl_src12_bgd.pi exist, delete to re-create
[Sat Oct 15 09:21:47 2011] ../../acisf00924/products/lightcurves/fullrun_ccd1_acisf00924_pi14-548_pass1_cl_src12_src.lc and ../../acisf00924/products/lightcurves/fullrun_ccd1_acisf00924_pi14-548_pass1_cl_src12_bgd.lc exist, delete to re-create
[Sat Oct 15 09:22:53 2011] Keeping rmf generated by specextract
[Sat Oct 15 09:22:53 2011] 194.499
[Sat Oct 15 09:24:32 2011] Updating aperture counts using extracted products
[Sat Oct 15 09:24:32 2011] Error reading totcts from fullrun_ccd1_acisf00924_pi14-548_pass1_cl_src12_src.pi.gz
[Sat Oct 15 09:24:32 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 09:24:32 2011] Using photon index=1.80, rate=0.00376, arf fullrun_ccd1_acisf00924_pi14-548_pass1_cl_src12.arf
[Sat Oct 15 09:24:32 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 15 09:24:32 2011] Updating source flux to 4e-14