[Sun Oct 30 19:59:24 2011] Detection parameters:
  Position = (252.4, 283.9) = 23 25 26.94 -12 5 5.6
  Extent = 0.7" x 0.6", rotation angle = 141 degrees
  Source counts = 20.3 +/- 5.0
  Background counts = 4.7
  Rate = 0.0005 +/- 0.0001

[Sun Oct 30 19:59:25 2011] Off-axis axis estimate = 3.40'
[Sun Oct 30 20:00:26 2011] Using EEF radius (= 0.67 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 20:00:26 2011] Initial guess for spatial extent in simple fitting = 0.67"
[Sun Oct 30 20:00:26 2011] source mask rpix=1.4, npix_max = 13, mask sum = 12, frac = 0.869
[Sun Oct 30 20:00:26 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.67"
[Sun Oct 30 20:00:27 2011] fullrun_ccd6_acisf00922_pi14-548_cl_pass0_src3.ximg exists
[Sun Oct 30 20:00:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00922_pi14-548_cl_pass0_src3.csv
[Sun Oct 30 20:00:27 2011] fullrun_ccd6_acisf00922_pi14-548_cl_pass0_src3_1.ximg exists
[Sun Oct 30 20:00:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00922_pi14-548_cl_pass0_src3.csv
[Sun Oct 30 20:00:27 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf00922_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf00922_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 20:00:27 2011] fullrun_ccd6_acisf00922_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Sun Oct 30 20:00:27 2011] fullrun_ccd6_acisf00922_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Oct 30 20:00:27 2011] Fit fullrun_ccd6_acisf00922_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Oct 30 20:00:33 2011] Spatial fit model total counts = 25.311500, observed total counts = 26.000000
[Sun Oct 30 20:00:33 2011] Offset between fit and detection position for source 4 = 0.733971 pixels
[Sun Oct 30 20:00:33 2011] 26.053090 total counts/ 5.736690 bgd. counts: snr = 8.482348
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.733971 pixels
  Position = (252.5, 284.7) = 23 25 26.95 -12 5 5.5
  Extent = 0.8 (0.6-1.0)", rotation angle = 0
  Source counts = 20.3 +/- 5.1
  Background counts = 5.7
  Rate = 0.0006 +/- 0.0001
[Sun Oct 30 20:00:33 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 20:00:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 20:00:33 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 20:00:33 2011] Source does appear to be extended
[Sun Oct 30 20:00:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 20:00:50 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 30 20:00:50 2011] Initial guess for spatial extent in simple fitting = 0.80"
[Sun Oct 30 20:00:50 2011] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.114
[Sun Oct 30 20:00:50 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.80"
[Sun Oct 30 20:00:51 2011] fullrun_ccd6_acisf00922_pi14-548_cl_pass1_src3.ximg exists
[Sun Oct 30 20:00:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00922_pi14-548_cl_pass1_src3.csv
[Sun Oct 30 20:00:51 2011] fullrun_ccd6_acisf00922_pi14-548_cl_pass1_src3_1.ximg exists
[Sun Oct 30 20:00:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00922_pi14-548_cl_pass1_src3.csv
[Sun Oct 30 20:00:51 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf00922_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf00922_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 20:00:51 2011] fullrun_ccd6_acisf00922_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Sun Oct 30 20:00:51 2011] fullrun_ccd6_acisf00922_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Oct 30 20:00:51 2011] Fit fullrun_ccd6_acisf00922_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Oct 30 20:00:58 2011] Spatial fit model total counts = 25.211100, observed total counts = 26.000000
[Sun Oct 30 20:00:58 2011] Offset between fit and detection position for source 4 = 0.025094 pixels
[Sun Oct 30 20:00:58 2011] 26.039340 total counts/ 5.824140 bgd. counts: snr = 8.376491
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.025094 pixels
  Position = (252.6, 284.7) = 23 25 26.95 -12 5 5.5
  Extent = 0.8 (0.6-1.0)", rotation angle = 0
  Source counts = 20.2 +/- 5.1
  Background counts = 5.8
  Rate = 0.0006 +/- 0.0001
[Sun Oct 30 20:00:58 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 20:00:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 20:00:58 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 20:00:58 2011] Source does appear to be extended
[Sun Oct 30 20:00:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 20:01:39 2011] Not overwriting source region fullrun_ccd6_acisf00922_pi14-548_pass1_cl_src4_src.reg
[Sun Oct 30 20:01:39 2011] Extracting stamp from image fullrun_ccd6_acisf00922_pi14-548_cl_sm2.00.img.gz, (216, 248) - (289, 322)
[Sun Oct 30 20:01:39 2011] Writing fullrun_ccd6_acisf00922_pi14-548_pass1_cl_src4.gif
[Sun Oct 30 20:01:46 2011] ../../acisf00922/products/events/fullrun_ccd6_acisf00922_pi14-548_pass1_cl_src4_src.evt and ../../acisf00922/products/events/fullrun_ccd6_acisf00922_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create
[Sun Oct 30 20:01:46 2011] Size of ../../acisf00922/products/events/fullrun_ccd6_acisf00922_pi14-548_pass1_cl_src4_src.evt.gz[events] = 23 counts
[Sun Oct 30 20:01:46 2011] Mean chipx,y = (943.96, 797.48)
[Sun Oct 30 20:01:46 2011] Mean tdetx,y = (3818.96, 2499.48)
[Sun Oct 30 20:01:46 2011] chipx,y range = (926.00-961.00, 777.00-811.00)
[Sun Oct 30 20:01:46 2011] Size of ../../acisf00922/products/events/fullrun_ccd6_acisf00922_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 48 counts
[Sun Oct 30 20:01:46 2011] ../../acisf00922/products/images/fullrun_ccd6_acisf00922_pi14-548_pass1_cl_src4_src.img and ../../acisf00922/products/images/fullrun_ccd6_acisf00922_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create
[Sun Oct 30 20:01:46 2011] ../../acisf00922/products/spectra/fullrun_ccd6_acisf00922_pi14-548_pass1_cl_src4_src.pi and ../../acisf00922/products/spectra/fullrun_ccd6_acisf00922_pi14-548_pass1_cl_src4_bgd.pi exist, delete to re-create
[Sun Oct 30 20:01:46 2011] Not generating rmf since there are only 20 counts
[Sun Oct 30 20:01:49 2011] ../../acisf00922/products/lightcurves/fullrun_ccd6_acisf00922_pi14-548_pass1_cl_src4_src.lc and ../../acisf00922/products/lightcurves/fullrun_ccd6_acisf00922_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create
[Sun Oct 30 20:02:08 2011] 209.97
[Sun Oct 30 20:02:24 2011] Updating aperture counts using extracted products
[Sun Oct 30 20:02:24 2011] Error reading totcts from fullrun_ccd6_acisf00922_pi14-548_pass1_cl_src4_src.pi.gz
[Sun Oct 30 20:02:24 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 20:02:24 2011] Using photon index=1.80, rate=0.000556, arf fullrun_ccd6_acisf00922_pi14-548_pass1_cl_src4.arf
[Sun Oct 30 20:02:24 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 20:02:24 2011] Updating source flux to 5.2e-15
[Sun Oct 30 20:02:30 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting