[Fri Oct  7 19:56:43 2011] Detection parameters:
  Position = (818.2, 38.5) = 12 10 32.91 39 23 47.7
  Extent = 0.5" x 0.5", rotation angle = 83 degrees
  Source counts = 22.2 +/- 5.7
  Background counts = 10.8
  Rate = 0.0003 +/- 9e-05

[Fri Oct  7 19:56:43 2011] Off-axis axis estimate = 0.48'
[Fri Oct  7 19:57:09 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 19:57:09 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Fri Oct  7 19:57:09 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.888
[Fri Oct  7 19:57:09 2011] Giving source the simple spatial ID 19 for pass 0, mean size = 0.39"
[Fri Oct  7 19:57:10 2011] fullrun_ccd7_acisf09218_pi14-548_cl_pass0_src19.ximg exists
[Fri Oct  7 19:57:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf09218_pi14-548_cl_pass0_src19.csv
[Fri Oct  7 19:57:10 2011] fullrun_ccd7_acisf09218_pi14-548_cl_pass0_src19_1.ximg exists
[Fri Oct  7 19:57:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf09218_pi14-548_cl_pass0_src19.csv
[Fri Oct  7 19:57:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf09218_pi14-548_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf09218_pi14-548_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 19:57:11 2011] fullrun_ccd7_acisf09218_pi14-548_cl_pass0_tfrozen_src19.ximg exists
[Fri Oct  7 19:57:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf09218_pi14-548_cl_pass0_tfrozen_src19.csv
[Fri Oct  7 19:57:11 2011] fullrun_ccd7_acisf09218_pi14-548_cl_pass0_tfrozen_src19_1.ximg exists
[Fri Oct  7 19:57:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf09218_pi14-548_cl_pass0_tfrozen_src19.csv
[Fri Oct  7 19:57:11 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf09218_pi14-548_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf09218_pi14-548_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 19:57:15 2011] Spatial fit model total counts = 100.194000, observed total counts = 156.000000
[Fri Oct  7 19:57:15 2011] Poor agreement between spatial fit and data for source 21
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Oct  7 19:57:15 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 19:57:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 19:57:15 2011] Assessing source extent using major
[Fri Oct  7 19:57:15 2011] Source does appear to be extended
[Fri Oct  7 19:57:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 19:57:15 2011] Deleting source due to low Poisson probability 0.8