[Tue Oct 25 22:55:00 2011] Detection parameters:
  Position = (977.8, 789.1) = 13 37 53.31 29 24 34.3
  Extent = 1.2" x 0.8", rotation angle = 162 degrees
  Source counts = 94.3 +/- 9.8
  Background counts = 2.7
  Rate = 0.003 +/- 0.0003

[Tue Oct 25 22:55:01 2011] Off-axis axis estimate = 5.25'
[Tue Oct 25 22:56:06 2011] Using EEF radius (= 1.28 ")to estimate initial spatial extent for simple fitting
[Tue Oct 25 22:56:06 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Oct 25 22:56:06 2011] Initial guess for spatial extent in simple fitting = 1.28"
[Tue Oct 25 22:56:06 2011] source mask rpix=2.6, npix_max = 38, mask sum = 35, frac = 0.906
[Tue Oct 25 22:56:06 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 1.28"
[Tue Oct 25 22:56:06 2011] fullrun_ccd2_acisf00920_pi14-548_cl_pass0_src2.ximg exists
[Tue Oct 25 22:56:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00920_pi14-548_cl_pass0_src2.csv
[Tue Oct 25 22:56:06 2011] fullrun_ccd2_acisf00920_pi14-548_cl_pass0_src2_1.ximg exists
[Tue Oct 25 22:56:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00920_pi14-548_cl_pass0_src2.csv
[Tue Oct 25 22:56:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf00920_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf00920_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 25 22:56:07 2011] fullrun_ccd2_acisf00920_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Tue Oct 25 22:56:07 2011] fullrun_ccd2_acisf00920_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Oct 25 22:56:07 2011] Fit fullrun_ccd2_acisf00920_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Tue Oct 25 22:56:19 2011] Spatial fit model total counts = 100.006000, observed total counts = 100.000000
[Tue Oct 25 22:56:19 2011] Offset between fit and detection position for source 3 = 1.073988 pixels
[Tue Oct 25 22:56:19 2011] 99.105750 total counts/ 2.091250 bgd. counts: snr = 67.086274
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.073988 pixels
  Position = (978.9, 789.2) = 13 37 53.29 29 24 34.1
  Extent = 1.3 (1.0-1.6)", rotation angle = 0
  Source counts = 97.0 +/- 10.0
  Background counts = 2.1
  Rate = 0.003 +/- 0.0003
[Tue Oct 25 22:56:19 2011] Vigneting correction estimate = 1.000000
[Tue Oct 25 22:56:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 25 22:56:19 2011] Assessing source extent using major axis lower bound
[Tue Oct 25 22:56:19 2011] Source does appear to be extended
[Tue Oct 25 22:56:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 25 22:56:43 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 25 22:56:43 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Oct 25 22:56:43 2011] Initial guess for spatial extent in simple fitting = 1.35"
[Tue Oct 25 22:56:43 2011] source mask rpix=2.7, npix_max = 42, mask sum = 36, frac = 0.856
[Tue Oct 25 22:56:43 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 1.35"
[Tue Oct 25 22:56:44 2011] fullrun_ccd2_acisf00920_pi14-548_cl_pass1_src2.ximg exists
[Tue Oct 25 22:56:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00920_pi14-548_cl_pass1_src2.csv
[Tue Oct 25 22:56:44 2011] fullrun_ccd2_acisf00920_pi14-548_cl_pass1_src2_1.ximg exists
[Tue Oct 25 22:56:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00920_pi14-548_cl_pass1_src2.csv
[Tue Oct 25 22:56:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf00920_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf00920_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 25 22:56:44 2011] fullrun_ccd2_acisf00920_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Tue Oct 25 22:56:44 2011] fullrun_ccd2_acisf00920_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Tue Oct 25 22:56:44 2011] Fit fullrun_ccd2_acisf00920_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Tue Oct 25 22:56:55 2011] Spatial fit model total counts = 104.165000, observed total counts = 104.000000
[Tue Oct 25 22:56:55 2011] Offset between fit and detection position for source 3 = 0.333333 pixels
[Tue Oct 25 22:56:55 2011] 105.916900 total counts/ 31.416400 bgd. counts: snr = 13.291714
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.333333 pixels
  Position = (978.6, 789.4) = 13 37 53.30 29 24 34.2
  Extent = 1.1 (0.9-1.4)", rotation angle = 0
  Source counts = 74.5 +/- 10.3
  Background counts = 31.4
  Rate = 0.002 +/- 0.0003
[Tue Oct 25 22:56:55 2011] Vigneting correction estimate = 1.000000
[Tue Oct 25 22:56:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 25 22:56:55 2011] Assessing source extent using major axis lower bound
[Tue Oct 25 22:56:55 2011] Source does appear to be extended
[Tue Oct 25 22:56:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 25 22:58:39 2011] Not overwriting source region fullrun_ccd2_acisf00920_pi14-548_pass1_cl_src3_src.reg
[Tue Oct 25 22:58:39 2011] Extracting stamp from image fullrun_ccd2_acisf00920_pi14-548_cl_sm2.00.img.gz, (929, 740) - (1028, 839)
[Tue Oct 25 22:58:39 2011] Writing fullrun_ccd2_acisf00920_pi14-548_pass1_cl_src3.gif
[Tue Oct 25 22:58:43 2011] ../../acisf00920/products/events/fullrun_ccd2_acisf00920_pi14-548_pass1_cl_src3_src.evt and ../../acisf00920/products/events/fullrun_ccd2_acisf00920_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Tue Oct 25 22:58:43 2011] Size of ../../acisf00920/products/events/fullrun_ccd2_acisf00920_pi14-548_pass1_cl_src3_src.evt.gz[events] = 100 counts
[Tue Oct 25 22:58:43 2011] Mean chipx,y = (211.44, 456.59)
[Tue Oct 25 22:58:43 2011] Mean tdetx,y = (3517.59, 3874.56)
[Tue Oct 25 22:58:43 2011] chipx,y range = (192.00-236.00, 434.00-479.00)
[Tue Oct 25 22:58:43 2011] Size of ../../acisf00920/products/events/fullrun_ccd2_acisf00920_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 25 counts
[Tue Oct 25 22:58:43 2011] ../../acisf00920/products/images/fullrun_ccd2_acisf00920_pi14-548_pass1_cl_src3_src.img and ../../acisf00920/products/images/fullrun_ccd2_acisf00920_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Tue Oct 25 22:58:43 2011] ../../acisf00920/products/spectra/fullrun_ccd2_acisf00920_pi14-548_pass1_cl_src3_src.pi and ../../acisf00920/products/spectra/fullrun_ccd2_acisf00920_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Tue Oct 25 22:58:43 2011] Not generating rmf since there are only 74 counts
[Tue Oct 25 22:58:45 2011] ../../acisf00920/products/lightcurves/fullrun_ccd2_acisf00920_pi14-548_pass1_cl_src3_src.lc and ../../acisf00920/products/lightcurves/fullrun_ccd2_acisf00920_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Tue Oct 25 22:59:38 2011] 186.664
[Tue Oct 25 23:01:48 2011] Updating aperture counts using extracted products
[Tue Oct 25 23:01:48 2011] Error reading totcts from fullrun_ccd2_acisf00920_pi14-548_pass1_cl_src3_src.pi.gz
[Tue Oct 25 23:01:48 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 25 23:01:48 2011] Using photon index=1.80, rate=0.00198, arf fullrun_ccd2_acisf00920_pi14-548_pass1_cl_src3.arf
[Tue Oct 25 23:01:48 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 25 23:01:48 2011] Updating source flux to 2.2e-14
[Tue Oct 25 23:02:10 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting