[Wed Oct 26 23:34:45 2011] Detection parameters:
  Position = (439.6, 1118.9) = 23 1 55.28 8 43 20.4
  Extent = 3.4" x 3.0", rotation angle = 57 degrees
  Source counts = 301.7 +/- 22.3
  Background counts = 196.3
  Rate = 0.003 +/- 0.0002

[Wed Oct 26 23:34:45 2011] Off-axis axis estimate = 13.02'
[Wed Oct 26 23:36:16 2011] Using EEF radius (= 7.60 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 23:36:16 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 26 23:36:16 2011] Initial guess for spatial extent in simple fitting = 7.60"
[Wed Oct 26 23:36:16 2011] source mask rpix=15.5, npix_max = 1018, mask sum = 1024, frac = 1.006
[Wed Oct 26 23:36:16 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.60"
[Wed Oct 26 23:36:16 2011] fullrun_ccd6_acisf00918_pi14-548_cl_pass0_src1.ximg exists
[Wed Oct 26 23:36:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00918_pi14-548_cl_pass0_src1.csv
[Wed Oct 26 23:36:16 2011] fullrun_ccd6_acisf00918_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Oct 26 23:36:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00918_pi14-548_cl_pass0_src1.csv
[Wed Oct 26 23:36:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf00918_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf00918_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 23:36:16 2011] fullrun_ccd6_acisf00918_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Oct 26 23:36:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00918_pi14-548_cl_pass0_tfrozen_src1.csv
[Wed Oct 26 23:36:16 2011] fullrun_ccd6_acisf00918_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Oct 26 23:36:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00918_pi14-548_cl_pass0_tfrozen_src1.csv
[Wed Oct 26 23:36:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf00918_pi14-548_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf00918_pi14-548_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 23:36:40 2011] Spatial fit model total counts = 893.346000, observed total counts = 800.000000
[Wed Oct 26 23:36:40 2011] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Oct 26 23:36:40 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 23:36:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 23:36:40 2011] Assessing source extent using major
[Wed Oct 26 23:36:40 2011] Source does appear to be extended
[Wed Oct 26 23:36:40 2011] Computing asymmetry using major and minor axis, asym = 1.14
[Wed Oct 26 23:37:15 2011] Using EEF radius (= 7.60 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 23:37:15 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 26 23:37:15 2011] Initial guess for spatial extent in simple fitting = 7.60"
[Wed Oct 26 23:37:15 2011] source mask rpix=15.5, npix_max = 1018, mask sum = 1024, frac = 1.006
[Wed Oct 26 23:37:15 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 7.60"
[Wed Oct 26 23:37:15 2011] fullrun_ccd6_acisf00918_pi14-548_cl_pass1_src1.ximg exists
[Wed Oct 26 23:37:16 2011] fullrun_ccd6_acisf00918_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Oct 26 23:37:16 2011] Fit fullrun_ccd6_acisf00918_pi14-548_cl_pass1_src1 appears to have run properly
[Wed Oct 26 23:37:16 2011] fullrun_ccd6_acisf00918_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Oct 26 23:37:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00918_pi14-548_cl_pass1_tfrozen_src1.csv
[Wed Oct 26 23:37:16 2011] fullrun_ccd6_acisf00918_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Oct 26 23:37:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00918_pi14-548_cl_pass1_tfrozen_src1.csv
[Wed Oct 26 23:37:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf00918_pi14-548_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf00918_pi14-548_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 23:37:35 2011] Spatial fit model total counts = 854.396000, observed total counts = 800.000000
[Wed Oct 26 23:37:35 2011] Offset between fit and detection position for source 1 = 4.391774 pixels
[Wed Oct 26 23:37:35 2011] 854.256000 total counts/ 314.344000 bgd. counts: snr = 30.452321
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 4.391774 pixels
  Position = (443.3, 1121.2) = 23 1 55.18 8 43 21.3
  Extent = 9.9 (8.8-10.9)" x 6.3 (5.6-7.1)", rotation angle = 301 (291-309) degrees
  Source counts = 539.9 +/- 29.2
  Background counts = 314.3
  Rate = 0.005 +/- 0.0003
[Wed Oct 26 23:37:35 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 23:37:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 23:37:35 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 23:37:35 2011] Source does appear to be extended
[Wed Oct 26 23:37:35 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.25
[Wed Oct 26 23:44:09 2011] Not overwriting source region fullrun_ccd6_acisf00918_pi14-548_pass1_cl_src1_src.reg
[Wed Oct 26 23:44:09 2011] Extracting stamp from image fullrun_ccd6_acisf00918_pi14-548_cl_sm2.00.img.gz, (0, 670) - (894, 1451)
[Wed Oct 26 23:44:09 2011] Writing fullrun_ccd6_acisf00918_pi14-548_pass1_cl_src1.gif
[Wed Oct 26 23:44:10 2011] ../../acisf00918/products/events/fullrun_ccd6_acisf00918_pi14-548_pass1_cl_src1_src.evt and ../../acisf00918/products/events/fullrun_ccd6_acisf00918_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Wed Oct 26 23:44:10 2011] Size of ../../acisf00918/products/events/fullrun_ccd6_acisf00918_pi14-548_pass1_cl_src1_src.evt.gz[events] = 741 counts
[Wed Oct 26 23:44:10 2011] Mean chipx,y = (403.38, 985.83)
[Wed Oct 26 23:44:10 2011] Mean tdetx,y = (3278.38, 2687.83)
[Wed Oct 26 23:44:10 2011] chipx,y range = (337.00-471.00, 901.00-1023.00)
[Wed Oct 26 23:44:10 2011] Size of ../../acisf00918/products/events/fullrun_ccd6_acisf00918_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 2303 counts
[Wed Oct 26 23:44:10 2011] ../../acisf00918/products/images/fullrun_ccd6_acisf00918_pi14-548_pass1_cl_src1_src.img and ../../acisf00918/products/images/fullrun_ccd6_acisf00918_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Wed Oct 26 23:44:10 2011] ../../acisf00918/products/spectra/fullrun_ccd6_acisf00918_pi14-548_pass1_cl_src1_src.pi and ../../acisf00918/products/spectra/fullrun_ccd6_acisf00918_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Wed Oct 26 23:44:13 2011] ../../acisf00918/products/lightcurves/fullrun_ccd6_acisf00918_pi14-548_pass1_cl_src1_src.lc and ../../acisf00918/products/lightcurves/fullrun_ccd6_acisf00918_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Wed Oct 26 23:44:30 2011] Keeping rmf generated by specextract
[Wed Oct 26 23:44:30 2011] 149.083
[Wed Oct 26 23:44:51 2011] Updating aperture counts using extracted products
[Wed Oct 26 23:44:51 2011] Error reading totcts from fullrun_ccd6_acisf00918_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Oct 26 23:44:51 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 23:44:51 2011] Using photon index=1.80, rate=0.00497, arf fullrun_ccd6_acisf00918_pi14-548_pass1_cl_src1.arf
[Wed Oct 26 23:44:51 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 23:44:51 2011] Updating source flux to 6.3e-14
[Wed Oct 26 23:45:44 2011] Flag p found in src. 1 procflags, skipping spectral fitting
[Wed Oct 26 23:46:02 2011] Reading fit data from acisf00918/analysis//spectral/fullrun_ccd6_acisf00918_pi14-548_pass1_cl_src1_pl.csv
[Wed Oct 26 23:46:02 2011] Spectral fit parameter nH value = 1.54887e+16
[Wed Oct 26 23:46:02 2011] Spectral fit parameter PhoIndex value = 1.47053
[Wed Oct 26 23:46:02 2011] Failed to get F(0.3-8.0) from acisf00918/analysis//spectral/fullrun_ccd6_acisf00918_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Oct 26 23:46:02 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 23:46:02 2011] Using Nh = 1.5e+16, photon index=1.47, rate=0.00497, arf fullrun_ccd6_acisf00918_pi14-548_pass1_cl_src1.arf
[Wed Oct 26 23:46:02 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 23:46:02 2011] Updating source flux to 7.2e-14