[Wed Oct 26 23:34:44 2011] Detection parameters:
  Position = (1159.9, 932.3) = 23 2 31.58 8 41 27.1
  Extent = 1.1" x 0.8", rotation angle = 51 degrees
  Source counts = 20.0 +/- 4.8
  Background counts = 3.0
  Rate = 0.0002 +/- 4e-05

[Wed Oct 26 23:34:44 2011] Off-axis axis estimate = 5.42'
[Wed Oct 26 23:36:13 2011] Using EEF radius (= 1.36 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 23:36:13 2011] Initial guess for spatial extent in simple fitting = 1.36"
[Wed Oct 26 23:36:13 2011] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.989
[Wed Oct 26 23:36:13 2011] Giving source the simple spatial ID 19 for pass 0, mean size = 1.36"
[Wed Oct 26 23:36:15 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass0_src19.ximg exists
[Wed Oct 26 23:36:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00918_pi14-548_cl_pass0_src19.csv
[Wed Oct 26 23:36:15 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass0_src19_1.ximg exists
[Wed Oct 26 23:36:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00918_pi14-548_cl_pass0_src19.csv
[Wed Oct 26 23:36:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00918_pi14-548_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00918_pi14-548_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 23:36:15 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass0_tfrozen_src19.ximg exists
[Wed Oct 26 23:36:15 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass0_tfrozen_src19_1.ximg exists
[Wed Oct 26 23:36:15 2011] Fit fullrun_ccd3_acisf00918_pi14-548_cl_pass0_tfrozen_src19 appears to have run properly
[Wed Oct 26 23:36:39 2011] Spatial fit model total counts = 29.699800, observed total counts = 30.000000
[Wed Oct 26 23:36:39 2011] Offset between fit and detection position for source 38 = 1.751008 pixels
[Wed Oct 26 23:36:39 2011] 30.461300 total counts/ 17.896600 bgd. counts: snr = 2.970071
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 1.751008 pixels
  Position = (1160.2, 934.0) = 23 2 31.58 8 41 27.7
  Extent = 0.7 (0.4-1.0)", rotation angle = 0
  Source counts = 12.6 +/- 5.5
  Background counts = 17.9
  Rate = 0.0001 +/- 5e-05
[Wed Oct 26 23:36:39 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 23:36:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 23:36:39 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 23:36:39 2011] Source does appear to be extended
[Wed Oct 26 23:36:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 23:37:13 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 23:37:13 2011] Initial guess for spatial extent in simple fitting = 0.66"
[Wed Oct 26 23:37:13 2011] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.178
[Wed Oct 26 23:37:13 2011] Giving source the simple spatial ID 19 for pass 1, mean size = 0.66"
[Wed Oct 26 23:37:14 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass1_src19.ximg exists
[Wed Oct 26 23:37:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00918_pi14-548_cl_pass1_src19.csv
[Wed Oct 26 23:37:14 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass1_src19_1.ximg exists
[Wed Oct 26 23:37:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00918_pi14-548_cl_pass1_src19.csv
[Wed Oct 26 23:37:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00918_pi14-548_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00918_pi14-548_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 23:37:15 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass1_tfrozen_src19.ximg exists
[Wed Oct 26 23:37:15 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass1_tfrozen_src19_1.ximg exists
[Wed Oct 26 23:37:15 2011] Fit fullrun_ccd3_acisf00918_pi14-548_cl_pass1_tfrozen_src19 appears to have run properly
[Wed Oct 26 23:37:34 2011] Spatial fit model total counts = 28.515100, observed total counts = 29.000000
[Wed Oct 26 23:37:34 2011] Offset between fit and detection position for source 38 = 0.120150 pixels
[Wed Oct 26 23:37:34 2011] 29.685600 total counts/ 17.909900 bgd. counts: snr = 2.782532
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 0.120150 pixels
  Position = (1160.1, 934.1) = 23 2 31.59 8 41 27.8
  Extent = 0.6 (0.4-1.5)", rotation angle = 0
  Source counts = 11.8 +/- 5.4
  Background counts = 17.9
  Rate = 0.0001 +/- 5e-05
[Wed Oct 26 23:37:34 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 23:37:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 23:37:34 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 23:37:34 2011] Source does appear to be extended
[Wed Oct 26 23:37:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 23:42:36 2011] Not overwriting source region fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src38_src.reg
[Wed Oct 26 23:42:36 2011] Extracting stamp from image fullrun_ccd3_acisf00918_pi14-548_cl_sm2.00.img.gz, (1131, 905) - (1189, 963)
[Wed Oct 26 23:42:36 2011] Writing fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src38.gif
[Wed Oct 26 23:43:33 2011] ../../acisf00918/products/events/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src38_src.evt and ../../acisf00918/products/events/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src38_bgd.evt exist, delete to re-create
[Wed Oct 26 23:43:33 2011] Size of ../../acisf00918/products/events/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src38_src.evt.gz[events] = 20 counts
[Wed Oct 26 23:43:33 2011] Mean chipx,y = (309.80, 966.95)
[Wed Oct 26 23:43:33 2011] Mean tdetx,y = (4165.05, 3370.80)
[Wed Oct 26 23:43:33 2011] chipx,y range = (294.00-328.00, 950.00-983.00)
[Wed Oct 26 23:43:33 2011] Size of ../../acisf00918/products/events/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src38_bgd.evt.gz[events] = 17 counts
[Wed Oct 26 23:43:33 2011] ../../acisf00918/products/images/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src38_src.img and ../../acisf00918/products/images/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src38_bgd.img exist, delete to re-create
[Wed Oct 26 23:43:33 2011] ../../acisf00918/products/spectra/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src38_src.pi and ../../acisf00918/products/spectra/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src38_bgd.pi exist, delete to re-create
[Wed Oct 26 23:43:33 2011] Not generating rmf since there are only 11 counts
[Wed Oct 26 23:43:36 2011] ../../acisf00918/products/lightcurves/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src38_src.lc and ../../acisf00918/products/lightcurves/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src38_bgd.lc exist, delete to re-create
[Wed Oct 26 23:44:06 2011] 183.347
[Wed Oct 26 23:44:51 2011] Updating aperture counts using extracted products
[Wed Oct 26 23:44:51 2011] Error reading totcts from fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src38_src.pi.gz
[Wed Oct 26 23:44:51 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 23:44:51 2011] Using photon index=1.80, rate=0.000108, arf fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src38.arf
[Wed Oct 26 23:44:51 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 23:44:51 2011] Updating source flux to 1.2e-15
[Wed Oct 26 23:45:30 2011] Source 38 has fewer than 100.000000 counts, skipping spectral fitting