[Wed Oct 26 23:34:43 2011] Detection parameters:
  Position = (663.4, 1102.1) = 23 2 48.05 8 42 50.7
  Extent = 0.6" x 0.5", rotation angle = 117 degrees
  Source counts = 20.1 +/- 4.7
  Background counts = 1.9
  Rate = 0.0002 +/- 4e-05

[Wed Oct 26 23:34:44 2011] Off-axis axis estimate = 2.36'
[Wed Oct 26 23:36:13 2011] Using EEF radius (= 0.47 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 23:36:13 2011] Initial guess for spatial extent in simple fitting = 0.47"
[Wed Oct 26 23:36:13 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.056
[Wed Oct 26 23:36:13 2011] Giving source the simple spatial ID 18 for pass 0, mean size = 0.47"
[Wed Oct 26 23:36:15 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass0_src18.ximg exists
[Wed Oct 26 23:36:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00918_pi14-548_cl_pass0_src18.csv
[Wed Oct 26 23:36:15 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass0_src18_1.ximg exists
[Wed Oct 26 23:36:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00918_pi14-548_cl_pass0_src18.csv
[Wed Oct 26 23:36:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00918_pi14-548_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00918_pi14-548_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 23:36:15 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass0_tfrozen_src18.ximg exists
[Wed Oct 26 23:36:15 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass0_tfrozen_src18_1.ximg exists
[Wed Oct 26 23:36:15 2011] Fit fullrun_ccd3_acisf00918_pi14-548_cl_pass0_tfrozen_src18 appears to have run properly
[Wed Oct 26 23:36:39 2011] Spatial fit model total counts = 25.584500, observed total counts = 26.000000
[Wed Oct 26 23:36:39 2011] Offset between fit and detection position for source 22 = 0.698081 pixels
[Wed Oct 26 23:36:39 2011] 25.552190 total counts/ 5.564690 bgd. counts: snr = 8.473015
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.698081 pixels
  Position = (664.0, 1102.4) = 23 2 48.05 8 42 50.6
  Extent = 0.6 (0.4-0.8)", rotation angle = 0
  Source counts = 20.0 +/- 5.1
  Background counts = 5.6
  Rate = 0.0002 +/- 5e-05
[Wed Oct 26 23:36:39 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 23:36:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 23:36:39 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 23:36:39 2011] Source does appear to be extended
[Wed Oct 26 23:36:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 23:37:13 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 23:37:13 2011] Initial guess for spatial extent in simple fitting = 0.55"
[Wed Oct 26 23:37:13 2011] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.142
[Wed Oct 26 23:37:13 2011] Giving source the simple spatial ID 18 for pass 1, mean size = 0.55"
[Wed Oct 26 23:37:14 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass1_src18.ximg exists
[Wed Oct 26 23:37:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00918_pi14-548_cl_pass1_src18.csv
[Wed Oct 26 23:37:14 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass1_src18_1.ximg exists
[Wed Oct 26 23:37:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00918_pi14-548_cl_pass1_src18.csv
[Wed Oct 26 23:37:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00918_pi14-548_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00918_pi14-548_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 23:37:15 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass1_tfrozen_src18.ximg exists
[Wed Oct 26 23:37:15 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass1_tfrozen_src18_1.ximg exists
[Wed Oct 26 23:37:15 2011] Fit fullrun_ccd3_acisf00918_pi14-548_cl_pass1_tfrozen_src18 appears to have run properly
[Wed Oct 26 23:37:34 2011] Spatial fit model total counts = 25.953200, observed total counts = 26.000000
[Wed Oct 26 23:37:34 2011] Offset between fit and detection position for source 22 = 0.010686 pixels
[Wed Oct 26 23:37:34 2011] 25.851020 total counts/ 5.747520 bgd. counts: snr = 8.385548
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.010686 pixels
  Position = (664.0, 1102.4) = 23 2 48.05 8 42 50.6
  Extent = 0.5 (0.4-0.8)", rotation angle = 0
  Source counts = 20.1 +/- 5.1
  Background counts = 5.7
  Rate = 0.0002 +/- 5e-05
[Wed Oct 26 23:37:34 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 23:37:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 23:37:34 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 23:37:34 2011] Source does appear to be extended
[Wed Oct 26 23:37:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 23:42:36 2011] Not overwriting source region fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src22_src.reg
[Wed Oct 26 23:42:36 2011] Extracting stamp from image fullrun_ccd3_acisf00918_pi14-548_cl_sm2.00.img.gz, (639, 1078) - (689, 1127)
[Wed Oct 26 23:42:36 2011] Writing fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src22.gif
[Wed Oct 26 23:43:30 2011] ../../acisf00918/products/events/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src22_src.evt and ../../acisf00918/products/events/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src22_bgd.evt exist, delete to re-create
[Wed Oct 26 23:43:30 2011] Size of ../../acisf00918/products/events/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src22_src.evt.gz[events] = 22 counts
[Wed Oct 26 23:43:30 2011] Mean chipx,y = (801.41, 764.91)
[Wed Oct 26 23:43:30 2011] Mean tdetx,y = (4367.09, 3862.41)
[Wed Oct 26 23:43:30 2011] chipx,y range = (783.00-816.00, 752.00-786.00)
[Wed Oct 26 23:43:30 2011] Size of ../../acisf00918/products/events/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src22_bgd.evt.gz[events] = 14 counts
[Wed Oct 26 23:43:30 2011] ../../acisf00918/products/images/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src22_src.img and ../../acisf00918/products/images/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src22_bgd.img exist, delete to re-create
[Wed Oct 26 23:43:30 2011] ../../acisf00918/products/spectra/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src22_src.pi and ../../acisf00918/products/spectra/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src22_bgd.pi exist, delete to re-create
[Wed Oct 26 23:43:30 2011] Not generating rmf since there are only 20 counts
[Wed Oct 26 23:43:33 2011] ../../acisf00918/products/lightcurves/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src22_src.lc and ../../acisf00918/products/lightcurves/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src22_bgd.lc exist, delete to re-create
[Wed Oct 26 23:44:06 2011] 201.739
[Wed Oct 26 23:44:51 2011] Updating aperture counts using extracted products
[Wed Oct 26 23:44:51 2011] Error reading totcts from fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src22_src.pi.gz
[Wed Oct 26 23:44:51 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 23:44:51 2011] Using photon index=1.80, rate=0.000185, arf fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src22.arf
[Wed Oct 26 23:44:51 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 23:44:51 2011] Updating source flux to 1.9e-15
[Wed Oct 26 23:45:30 2011] Source 22 has fewer than 100.000000 counts, skipping spectral fitting