[Wed Oct 26 23:34:43 2011] Detection parameters:
  Position = (630.9, 1078.8) = 23 2 49.13 8 42 39.2
  Extent = 0.5" x 0.5", rotation angle = 80 degrees
  Source counts = 52.8 +/- 7.4
  Background counts = 2.2
  Rate = 0.0005 +/- 7e-05

[Wed Oct 26 23:34:44 2011] Off-axis axis estimate = 2.58'
[Wed Oct 26 23:36:13 2011] Using EEF radius (= 0.50 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 23:36:13 2011] Initial guess for spatial extent in simple fitting = 0.50"
[Wed Oct 26 23:36:13 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.967
[Wed Oct 26 23:36:13 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 0.50"
[Wed Oct 26 23:36:14 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass0_src9.ximg exists
[Wed Oct 26 23:36:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00918_pi14-548_cl_pass0_src9.csv
[Wed Oct 26 23:36:14 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass0_src9_1.ximg exists
[Wed Oct 26 23:36:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00918_pi14-548_cl_pass0_src9.csv
[Wed Oct 26 23:36:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00918_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00918_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 23:36:15 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Wed Oct 26 23:36:15 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Wed Oct 26 23:36:15 2011] Fit fullrun_ccd3_acisf00918_pi14-548_cl_pass0_tfrozen_src9 appears to have run properly
[Wed Oct 26 23:36:39 2011] Spatial fit model total counts = 62.785200, observed total counts = 63.000000
[Wed Oct 26 23:36:39 2011] Offset between fit and detection position for source 21 = 0.714553 pixels
[Wed Oct 26 23:36:39 2011] 63.326300 total counts/ 11.778100 bgd. counts: snr = 15.020206
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.714553 pixels
  Position = (631.4, 1079.3) = 23 2 49.13 8 42 39.2
  Extent = 0.5 (0.4-0.5)", rotation angle = 0
  Source counts = 51.5 +/- 8.0
  Background counts = 11.8
  Rate = 0.0005 +/- 7e-05
[Wed Oct 26 23:36:39 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 23:36:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 23:36:39 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 23:36:39 2011] Source does appear to be extended
[Wed Oct 26 23:36:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 23:37:13 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 23:37:13 2011] Initial guess for spatial extent in simple fitting = 0.45"
[Wed Oct 26 23:37:13 2011] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.114
[Wed Oct 26 23:37:13 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 0.45"
[Wed Oct 26 23:37:14 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass1_src9.ximg exists
[Wed Oct 26 23:37:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00918_pi14-548_cl_pass1_src9.csv
[Wed Oct 26 23:37:14 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass1_src9_1.ximg exists
[Wed Oct 26 23:37:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00918_pi14-548_cl_pass1_src9.csv
[Wed Oct 26 23:37:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00918_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00918_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 23:37:15 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Wed Oct 26 23:37:15 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Wed Oct 26 23:37:15 2011] Fit fullrun_ccd3_acisf00918_pi14-548_cl_pass1_tfrozen_src9 appears to have run properly
[Wed Oct 26 23:37:34 2011] Spatial fit model total counts = 59.911600, observed total counts = 60.000000
[Wed Oct 26 23:37:34 2011] Offset between fit and detection position for source 21 = 0.000466 pixels
[Wed Oct 26 23:37:34 2011] 59.985230 total counts/ 7.855930 bgd. counts: snr = 18.598721
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.000466 pixels
  Position = (631.4, 1079.3) = 23 2 49.13 8 42 39.2
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 52.1 +/- 7.7
  Background counts = 7.9
  Rate = 0.0005 +/- 7e-05
[Wed Oct 26 23:37:34 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 23:37:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 23:37:34 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 23:37:34 2011] Source does appear to be extended
[Wed Oct 26 23:37:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 23:42:36 2011] Not overwriting source region fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src21_src.reg
[Wed Oct 26 23:42:36 2011] Extracting stamp from image fullrun_ccd3_acisf00918_pi14-548_cl_sm2.00.img.gz, (611, 1059) - (652, 1100)
[Wed Oct 26 23:42:36 2011] Writing fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src21.gif
[Wed Oct 26 23:43:02 2011] ../../acisf00918/products/events/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src21_src.evt and ../../acisf00918/products/events/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src21_bgd.evt exist, delete to re-create
[Wed Oct 26 23:43:02 2011] Size of ../../acisf00918/products/events/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src21_src.evt.gz[events] = 53 counts
[Wed Oct 26 23:43:02 2011] Mean chipx,y = (808.68, 729.25)
[Wed Oct 26 23:43:02 2011] Mean tdetx,y = (4402.75, 3869.68)
[Wed Oct 26 23:43:02 2011] chipx,y range = (792.00-825.00, 711.00-748.00)
[Wed Oct 26 23:43:02 2011] Size of ../../acisf00918/products/events/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src21_bgd.evt.gz[events] = 18 counts
[Wed Oct 26 23:43:02 2011] ../../acisf00918/products/images/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src21_src.img and ../../acisf00918/products/images/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src21_bgd.img exist, delete to re-create
[Wed Oct 26 23:43:02 2011] ../../acisf00918/products/spectra/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src21_src.pi and ../../acisf00918/products/spectra/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src21_bgd.pi exist, delete to re-create
[Wed Oct 26 23:43:02 2011] Not generating rmf since there are only 52 counts
[Wed Oct 26 23:43:05 2011] ../../acisf00918/products/lightcurves/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src21_src.lc and ../../acisf00918/products/lightcurves/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src21_bgd.lc exist, delete to re-create
[Wed Oct 26 23:44:06 2011] 200.855
[Wed Oct 26 23:44:51 2011] Updating aperture counts using extracted products
[Wed Oct 26 23:44:51 2011] Error reading totcts from fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src21_src.pi.gz
[Wed Oct 26 23:44:51 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 23:44:51 2011] Using photon index=1.80, rate=0.00048, arf fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src21.arf
[Wed Oct 26 23:44:51 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 23:44:51 2011] Updating source flux to 5.1e-15
[Wed Oct 26 23:45:30 2011] Source 21 has fewer than 100.000000 counts, skipping spectral fitting