[Wed Oct 26 23:34:43 2011] Detection parameters:
  Position = (469.8, 1035.1) = 23 2 54.48 8 42 17.7
  Extent = 0.6" x 0.5", rotation angle = 14 degrees
  Source counts = 12.5 +/- 3.7
  Background counts = 1.5
  Rate = 0.0001 +/- 3e-05

[Wed Oct 26 23:34:44 2011] Off-axis axis estimate = 3.38'
[Wed Oct 26 23:36:13 2011] Using EEF radius (= 0.66 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 23:36:13 2011] Initial guess for spatial extent in simple fitting = 0.66"
[Wed Oct 26 23:36:13 2011] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.169
[Wed Oct 26 23:36:13 2011] Giving source the simple spatial ID 29 for pass 0, mean size = 0.66"
[Wed Oct 26 23:36:15 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass0_src29.ximg exists
[Wed Oct 26 23:36:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00918_pi14-548_cl_pass0_src29.csv
[Wed Oct 26 23:36:15 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass0_src29_1.ximg exists
[Wed Oct 26 23:36:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00918_pi14-548_cl_pass0_src29.csv
[Wed Oct 26 23:36:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00918_pi14-548_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00918_pi14-548_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 23:36:15 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass0_tfrozen_src29.ximg exists
[Wed Oct 26 23:36:15 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass0_tfrozen_src29_1.ximg exists
[Wed Oct 26 23:36:15 2011] Fit fullrun_ccd3_acisf00918_pi14-548_cl_pass0_tfrozen_src29 appears to have run properly
[Wed Oct 26 23:36:39 2011] Spatial fit model total counts = 20.112300, observed total counts = 21.000000
[Wed Oct 26 23:36:39 2011] Offset between fit and detection position for source 19 = 0.946943 pixels
[Wed Oct 26 23:36:39 2011] 19.237560 total counts/ 6.865960 bgd. counts: snr = 4.721448
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.946943 pixels
  Position = (470.5, 1035.7) = 23 2 54.47 8 42 17.8
  Extent = 0.6 (0.4-0.9)", rotation angle = 0
  Source counts = 12.4 +/- 4.4
  Background counts = 6.9
  Rate = 0.0001 +/- 4e-05
[Wed Oct 26 23:36:39 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 23:36:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 23:36:39 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 23:36:39 2011] Source does appear to be extended
[Wed Oct 26 23:36:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 23:37:13 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 23:37:13 2011] Initial guess for spatial extent in simple fitting = 0.59"
[Wed Oct 26 23:37:13 2011] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.779
[Wed Oct 26 23:37:13 2011] Giving source the simple spatial ID 28 for pass 1, mean size = 0.59"
[Wed Oct 26 23:37:14 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass1_src28.ximg exists
[Wed Oct 26 23:37:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00918_pi14-548_cl_pass1_src28.csv
[Wed Oct 26 23:37:14 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass1_src28_1.ximg exists
[Wed Oct 26 23:37:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00918_pi14-548_cl_pass1_src28.csv
[Wed Oct 26 23:37:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00918_pi14-548_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00918_pi14-548_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 23:37:15 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass1_tfrozen_src28.ximg exists
[Wed Oct 26 23:37:15 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass1_tfrozen_src28_1.ximg exists
[Wed Oct 26 23:37:15 2011] Fit fullrun_ccd3_acisf00918_pi14-548_cl_pass1_tfrozen_src28 appears to have run properly
[Wed Oct 26 23:37:34 2011] Spatial fit model total counts = 23.129700, observed total counts = 23.000000
[Wed Oct 26 23:37:34 2011] Offset between fit and detection position for source 19 = 0.057902 pixels
[Wed Oct 26 23:37:34 2011] 23.173000 total counts/ 11.065800 bgd. counts: snr = 3.639589
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.057902 pixels
  Position = (470.6, 1035.7) = 23 2 54.47 8 42 17.8
  Extent = 0.6 (0.4-0.9)", rotation angle = 0
  Source counts = 12.1 +/- 4.8
  Background counts = 11.1
  Rate = 0.0001 +/- 4e-05
[Wed Oct 26 23:37:34 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 23:37:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 23:37:34 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 23:37:34 2011] Source does appear to be extended
[Wed Oct 26 23:37:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 23:42:36 2011] Not overwriting source region fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src19_src.reg
[Wed Oct 26 23:42:36 2011] Extracting stamp from image fullrun_ccd3_acisf00918_pi14-548_cl_sm2.00.img.gz, (444, 1010) - (497, 1062)
[Wed Oct 26 23:42:36 2011] Writing fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src19.gif
[Wed Oct 26 23:43:57 2011] ../../acisf00918/products/events/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src19_src.evt and ../../acisf00918/products/events/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src19_bgd.evt exist, delete to re-create
[Wed Oct 26 23:43:57 2011] Size of ../../acisf00918/products/events/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src19_src.evt.gz[events] = 14 counts
[Wed Oct 26 23:43:57 2011] Mean chipx,y = (902.57, 589.71)
[Wed Oct 26 23:43:57 2011] Mean tdetx,y = (4542.29, 3963.57)
[Wed Oct 26 23:43:57 2011] chipx,y range = (885.00-920.00, 575.00-607.00)
[Wed Oct 26 23:43:57 2011] Size of ../../acisf00918/products/events/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src19_bgd.evt.gz[events] = 23 counts
[Wed Oct 26 23:43:57 2011] ../../acisf00918/products/images/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src19_src.img and ../../acisf00918/products/images/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src19_bgd.img exist, delete to re-create
[Wed Oct 26 23:43:57 2011] ../../acisf00918/products/spectra/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src19_src.pi and ../../acisf00918/products/spectra/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src19_bgd.pi exist, delete to re-create
[Wed Oct 26 23:43:57 2011] Not generating rmf since there are only 12 counts
[Wed Oct 26 23:44:01 2011] ../../acisf00918/products/lightcurves/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src19_src.lc and ../../acisf00918/products/lightcurves/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src19_bgd.lc exist, delete to re-create
[Wed Oct 26 23:44:09 2011] 198.489
[Wed Oct 26 23:44:51 2011] Updating aperture counts using extracted products
[Wed Oct 26 23:44:51 2011] Error reading totcts from fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src19_src.pi.gz
[Wed Oct 26 23:44:51 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 23:44:51 2011] Using photon index=1.80, rate=0.000112, arf fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src19.arf
[Wed Oct 26 23:44:51 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 23:44:51 2011] Updating source flux to 1.2e-15
[Wed Oct 26 23:45:30 2011] Source 19 has fewer than 100.000000 counts, skipping spectral fitting