[Wed Oct 26 23:34:42 2011] Detection parameters:
  Position = (780.8, 982.3) = 23 2 44.16 8 41 51.8
  Extent = 0.6" x 0.5", rotation angle = 21 degrees
  Source counts = 41.9 +/- 6.6
  Background counts = 2.1
  Rate = 0.0004 +/- 6e-05

[Wed Oct 26 23:34:44 2011] Off-axis axis estimate = 3.43'
[Wed Oct 26 23:36:13 2011] Using EEF radius (= 0.68 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 23:36:13 2011] Initial guess for spatial extent in simple fitting = 0.68"
[Wed Oct 26 23:36:13 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.140
[Wed Oct 26 23:36:13 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 0.68"
[Wed Oct 26 23:36:14 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass0_src11.ximg exists
[Wed Oct 26 23:36:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00918_pi14-548_cl_pass0_src11.csv
[Wed Oct 26 23:36:14 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass0_src11_1.ximg exists
[Wed Oct 26 23:36:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00918_pi14-548_cl_pass0_src11.csv
[Wed Oct 26 23:36:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00918_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00918_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 23:36:15 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Wed Oct 26 23:36:15 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Wed Oct 26 23:36:15 2011] Fit fullrun_ccd3_acisf00918_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Wed Oct 26 23:36:39 2011] Spatial fit model total counts = 49.353800, observed total counts = 49.000000
[Wed Oct 26 23:36:39 2011] Offset between fit and detection position for source 16 = 1.028761 pixels
[Wed Oct 26 23:36:39 2011] 48.605800 total counts/ 11.611500 bgd. counts: snr = 10.856520
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 1.028761 pixels
  Position = (781.6, 983.0) = 23 2 44.15 8 41 51.8
  Extent = 0.5 (0.4-0.8)", rotation angle = 0
  Source counts = 37.0 +/- 7.0
  Background counts = 11.6
  Rate = 0.0003 +/- 6e-05
[Wed Oct 26 23:36:39 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 23:36:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 23:36:39 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 23:36:39 2011] Source does appear to be extended
[Wed Oct 26 23:36:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 23:37:13 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 23:37:13 2011] Initial guess for spatial extent in simple fitting = 0.54"
[Wed Oct 26 23:37:13 2011] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.183
[Wed Oct 26 23:37:13 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 0.54"
[Wed Oct 26 23:37:14 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass1_src11.ximg exists
[Wed Oct 26 23:37:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00918_pi14-548_cl_pass1_src11.csv
[Wed Oct 26 23:37:14 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass1_src11_1.ximg exists
[Wed Oct 26 23:37:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00918_pi14-548_cl_pass1_src11.csv
[Wed Oct 26 23:37:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00918_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00918_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 23:37:15 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Wed Oct 26 23:37:15 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Wed Oct 26 23:37:15 2011] Fit fullrun_ccd3_acisf00918_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Wed Oct 26 23:37:34 2011] Spatial fit model total counts = 49.388200, observed total counts = 49.000000
[Wed Oct 26 23:37:34 2011] Offset between fit and detection position for source 16 = 0.058532 pixels
[Wed Oct 26 23:37:34 2011] 48.237500 total counts/ 11.550200 bgd. counts: snr = 10.794959
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.058532 pixels
  Position = (781.6, 983.0) = 23 2 44.15 8 41 51.9
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 36.7 +/- 6.9
  Background counts = 11.6
  Rate = 0.0003 +/- 6e-05
[Wed Oct 26 23:37:34 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 23:37:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 23:37:34 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 23:37:34 2011] Source does appear to be extended
[Wed Oct 26 23:37:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 23:42:36 2011] Not overwriting source region fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src16_src.reg
[Wed Oct 26 23:42:36 2011] Extracting stamp from image fullrun_ccd3_acisf00918_pi14-548_cl_sm2.00.img.gz, (758, 959) - (805, 1007)
[Wed Oct 26 23:42:36 2011] Writing fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src16.gif
[Wed Oct 26 23:43:08 2011] ../../acisf00918/products/events/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src16_src.evt and ../../acisf00918/products/events/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src16_bgd.evt exist, delete to re-create
[Wed Oct 26 23:43:08 2011] Size of ../../acisf00918/products/events/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src16_src.evt.gz[events] = 40 counts
[Wed Oct 26 23:43:08 2011] Mean chipx,y = (628.73, 752.77)
[Wed Oct 26 23:43:08 2011] Mean tdetx,y = (4379.23, 3689.72)
[Wed Oct 26 23:43:08 2011] chipx,y range = (614.00-649.00, 735.00-773.00)
[Wed Oct 26 23:43:08 2011] Size of ../../acisf00918/products/events/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src16_bgd.evt.gz[events] = 18 counts
[Wed Oct 26 23:43:08 2011] ../../acisf00918/products/images/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src16_src.img and ../../acisf00918/products/images/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src16_bgd.img exist, delete to re-create
[Wed Oct 26 23:43:08 2011] ../../acisf00918/products/spectra/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src16_src.pi and ../../acisf00918/products/spectra/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src16_bgd.pi exist, delete to re-create
[Wed Oct 26 23:43:08 2011] Not generating rmf since there are only 36 counts
[Wed Oct 26 23:43:11 2011] ../../acisf00918/products/lightcurves/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src16_src.lc and ../../acisf00918/products/lightcurves/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src16_bgd.lc exist, delete to re-create
[Wed Oct 26 23:44:06 2011] 195.057
[Wed Oct 26 23:44:51 2011] Updating aperture counts using extracted products
[Wed Oct 26 23:44:51 2011] Error reading totcts from fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src16_src.pi.gz
[Wed Oct 26 23:44:51 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 23:44:51 2011] Using photon index=1.80, rate=0.000338, arf fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src16.arf
[Wed Oct 26 23:44:51 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 23:44:51 2011] Updating source flux to 3.7e-15
[Wed Oct 26 23:45:30 2011] Source 16 has fewer than 100.000000 counts, skipping spectral fitting