[Wed Oct 26 23:34:42 2011] Detection parameters:
  Position = (868.3, 913.3) = 23 2 41.25 8 41 17.8
  Extent = 0.7" x 0.5", rotation angle = 26 degrees
  Source counts = 19.4 +/- 4.6
  Background counts = 1.6
  Rate = 0.0002 +/- 4e-05

[Wed Oct 26 23:34:44 2011] Off-axis axis estimate = 4.19'
[Wed Oct 26 23:36:13 2011] Using EEF radius (= 0.89 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 23:36:13 2011] Initial guess for spatial extent in simple fitting = 0.89"
[Wed Oct 26 23:36:13 2011] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.175
[Wed Oct 26 23:36:13 2011] Giving source the simple spatial ID 20 for pass 0, mean size = 0.89"
[Wed Oct 26 23:36:15 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass0_src20.ximg exists
[Wed Oct 26 23:36:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00918_pi14-548_cl_pass0_src20.csv
[Wed Oct 26 23:36:15 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass0_src20_1.ximg exists
[Wed Oct 26 23:36:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00918_pi14-548_cl_pass0_src20.csv
[Wed Oct 26 23:36:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00918_pi14-548_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00918_pi14-548_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 23:36:15 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass0_tfrozen_src20.ximg exists
[Wed Oct 26 23:36:15 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass0_tfrozen_src20_1.ximg exists
[Wed Oct 26 23:36:15 2011] Fit fullrun_ccd3_acisf00918_pi14-548_cl_pass0_tfrozen_src20 appears to have run properly
[Wed Oct 26 23:36:39 2011] Spatial fit model total counts = 24.705100, observed total counts = 25.000000
[Wed Oct 26 23:36:39 2011] Offset between fit and detection position for source 13 = 0.636274 pixels
[Wed Oct 26 23:36:39 2011] 24.969090 total counts/ 5.263590 bgd. counts: snr = 8.589076
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.636274 pixels
  Position = (868.7, 913.8) = 23 2 41.26 8 41 17.8
  Extent = 0.7 (0.5-1.0)", rotation angle = 0
  Source counts = 19.7 +/- 5.0
  Background counts = 5.3
  Rate = 0.0002 +/- 5e-05
[Wed Oct 26 23:36:39 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 23:36:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 23:36:39 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 23:36:39 2011] Source does appear to be extended
[Wed Oct 26 23:36:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 23:37:13 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 23:37:13 2011] Initial guess for spatial extent in simple fitting = 0.72"
[Wed Oct 26 23:37:13 2011] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.029
[Wed Oct 26 23:37:13 2011] Giving source the simple spatial ID 20 for pass 1, mean size = 0.72"
[Wed Oct 26 23:37:14 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass1_src20.ximg exists
[Wed Oct 26 23:37:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00918_pi14-548_cl_pass1_src20.csv
[Wed Oct 26 23:37:14 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass1_src20_1.ximg exists
[Wed Oct 26 23:37:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00918_pi14-548_cl_pass1_src20.csv
[Wed Oct 26 23:37:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00918_pi14-548_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00918_pi14-548_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 23:37:15 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass1_tfrozen_src20.ximg exists
[Wed Oct 26 23:37:15 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass1_tfrozen_src20_1.ximg exists
[Wed Oct 26 23:37:15 2011] Fit fullrun_ccd3_acisf00918_pi14-548_cl_pass1_tfrozen_src20 appears to have run properly
[Wed Oct 26 23:37:34 2011] Spatial fit model total counts = 25.786500, observed total counts = 26.000000
[Wed Oct 26 23:37:34 2011] Offset between fit and detection position for source 13 = 0.028756 pixels
[Wed Oct 26 23:37:34 2011] 25.946290 total counts/ 6.087190 bgd. counts: snr = 8.049171
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.028756 pixels
  Position = (868.8, 913.8) = 23 2 41.25 8 41 17.8
  Extent = 0.8 (0.5-1.0)", rotation angle = 0
  Source counts = 19.9 +/- 5.1
  Background counts = 6.1
  Rate = 0.0002 +/- 5e-05
[Wed Oct 26 23:37:34 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 23:37:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 23:37:34 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 23:37:34 2011] Source does appear to be extended
[Wed Oct 26 23:37:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 23:42:36 2011] Not overwriting source region fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src13_src.reg
[Wed Oct 26 23:42:36 2011] Extracting stamp from image fullrun_ccd3_acisf00918_pi14-548_cl_sm2.00.img.gz, (834, 879) - (903, 948)
[Wed Oct 26 23:42:36 2011] Writing fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src13.gif
[Wed Oct 26 23:43:36 2011] ../../acisf00918/products/events/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src13_src.evt and ../../acisf00918/products/events/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src13_bgd.evt exist, delete to re-create
[Wed Oct 26 23:43:36 2011] Size of ../../acisf00918/products/events/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src13_src.evt.gz[events] = 21 counts
[Wed Oct 26 23:43:36 2011] Mean chipx,y = (518.52, 756.67)
[Wed Oct 26 23:43:36 2011] Mean tdetx,y = (4375.33, 3579.52)
[Wed Oct 26 23:43:36 2011] chipx,y range = (503.00-537.00, 741.00-776.00)
[Wed Oct 26 23:43:36 2011] Size of ../../acisf00918/products/events/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src13_bgd.evt.gz[events] = 24 counts
[Wed Oct 26 23:43:36 2011] ../../acisf00918/products/images/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src13_src.img and ../../acisf00918/products/images/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src13_bgd.img exist, delete to re-create
[Wed Oct 26 23:43:36 2011] ../../acisf00918/products/spectra/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src13_src.pi and ../../acisf00918/products/spectra/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src13_bgd.pi exist, delete to re-create
[Wed Oct 26 23:43:36 2011] Not generating rmf since there are only 19 counts
[Wed Oct 26 23:43:38 2011] ../../acisf00918/products/lightcurves/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src13_src.lc and ../../acisf00918/products/lightcurves/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src13_bgd.lc exist, delete to re-create
[Wed Oct 26 23:44:06 2011] 189.652
[Wed Oct 26 23:44:51 2011] Updating aperture counts using extracted products
[Wed Oct 26 23:44:51 2011] Error reading totcts from fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src13_src.pi.gz
[Wed Oct 26 23:44:51 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 23:44:51 2011] Using photon index=1.80, rate=0.000183, arf fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src13.arf
[Wed Oct 26 23:44:51 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 23:44:51 2011] Updating source flux to 2e-15
[Wed Oct 26 23:45:30 2011] Source 13 has fewer than 100.000000 counts, skipping spectral fitting