[Wed Oct 26 23:34:42 2011] Detection parameters:
  Position = (220.4, 895.6) = 23 3 2.75 8 41 9.1
  Extent = 0.9" x 0.5", rotation angle = 138 degrees
  Source counts = 17.5 +/- 4.4
  Background counts = 1.5
  Rate = 0.0002 +/- 4e-05

[Wed Oct 26 23:34:44 2011] Off-axis axis estimate = 5.54'
[Wed Oct 26 23:36:13 2011] Using EEF radius (= 1.41 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 23:36:13 2011] Initial guess for spatial extent in simple fitting = 1.41"
[Wed Oct 26 23:36:13 2011] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.080
[Wed Oct 26 23:36:13 2011] Giving source the simple spatial ID 22 for pass 0, mean size = 1.41"
[Wed Oct 26 23:36:15 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass0_src22.ximg exists
[Wed Oct 26 23:36:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00918_pi14-548_cl_pass0_src22.csv
[Wed Oct 26 23:36:15 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass0_src22_1.ximg exists
[Wed Oct 26 23:36:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00918_pi14-548_cl_pass0_src22.csv
[Wed Oct 26 23:36:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00918_pi14-548_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00918_pi14-548_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 23:36:15 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass0_tfrozen_src22.ximg exists
[Wed Oct 26 23:36:15 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass0_tfrozen_src22_1.ximg exists
[Wed Oct 26 23:36:15 2011] Fit fullrun_ccd3_acisf00918_pi14-548_cl_pass0_tfrozen_src22 appears to have run properly
[Wed Oct 26 23:36:39 2011] Spatial fit model total counts = 29.974400, observed total counts = 30.000000
[Wed Oct 26 23:36:39 2011] Offset between fit and detection position for source 12 = 0.277212 pixels
[Wed Oct 26 23:36:39 2011] 29.507440 total counts/ 8.127040 bgd. counts: snr = 7.499799
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.277212 pixels
  Position = (220.4, 895.8) = 23 3 2.77 8 41 8.9
  Extent = 1.0 (0.4-1.6)", rotation angle = 0
  Source counts = 21.4 +/- 5.4
  Background counts = 8.1
  Rate = 0.0002 +/- 5e-05
[Wed Oct 26 23:36:39 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 23:36:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 23:36:39 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 23:36:39 2011] Source does appear to be extended
[Wed Oct 26 23:36:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 23:37:13 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 23:37:13 2011] Initial guess for spatial extent in simple fitting = 1.02"
[Wed Oct 26 23:37:13 2011] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.945
[Wed Oct 26 23:37:13 2011] Giving source the simple spatial ID 22 for pass 1, mean size = 1.02"
[Wed Oct 26 23:37:14 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass1_src22.ximg exists
[Wed Oct 26 23:37:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00918_pi14-548_cl_pass1_src22.csv
[Wed Oct 26 23:37:14 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass1_src22_1.ximg exists
[Wed Oct 26 23:37:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00918_pi14-548_cl_pass1_src22.csv
[Wed Oct 26 23:37:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00918_pi14-548_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00918_pi14-548_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 23:37:15 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass1_tfrozen_src22.ximg exists
[Wed Oct 26 23:37:15 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass1_tfrozen_src22_1.ximg exists
[Wed Oct 26 23:37:15 2011] Fit fullrun_ccd3_acisf00918_pi14-548_cl_pass1_tfrozen_src22 appears to have run properly
[Wed Oct 26 23:37:34 2011] Spatial fit model total counts = 28.070000, observed total counts = 29.000000
[Wed Oct 26 23:37:34 2011] Offset between fit and detection position for source 12 = 1.293662 pixels
[Wed Oct 26 23:37:34 2011] 26.806500 total counts/ 12.452200 bgd. counts: snr = 4.067794
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 1.293662 pixels
  Position = (221.7, 895.6) = 23 3 2.72 8 41 8.8
  Extent = 0.6 (0.4-1.5)", rotation angle = 0
  Source counts = 14.4 +/- 5.2
  Background counts = 12.5
  Rate = 0.0001 +/- 5e-05
[Wed Oct 26 23:37:34 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 23:37:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 23:37:34 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 23:37:34 2011] Source does appear to be extended
[Wed Oct 26 23:37:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 23:42:36 2011] Not overwriting source region fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src12_src.reg
[Wed Oct 26 23:42:36 2011] Extracting stamp from image fullrun_ccd3_acisf00918_pi14-548_cl_sm2.00.img.gz, (193, 867) - (250, 924)
[Wed Oct 26 23:42:36 2011] Writing fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src12.gif
[Wed Oct 26 23:43:41 2011] ../../acisf00918/products/events/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src12_src.evt and ../../acisf00918/products/events/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src12_bgd.evt exist, delete to re-create
[Wed Oct 26 23:43:41 2011] Size of ../../acisf00918/products/events/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src12_src.evt.gz[events] = 21 counts
[Wed Oct 26 23:43:41 2011] Mean chipx,y = (995.05, 318.24)
[Wed Oct 26 23:43:41 2011] Mean tdetx,y = (4813.76, 4056.05)
[Wed Oct 26 23:43:41 2011] chipx,y range = (982.00-1015.00, 303.00-338.00)
[Wed Oct 26 23:43:41 2011] Size of ../../acisf00918/products/events/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src12_bgd.evt.gz[events] = 18 counts
[Wed Oct 26 23:43:41 2011] ../../acisf00918/products/images/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src12_src.img and ../../acisf00918/products/images/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src12_bgd.img exist, delete to re-create
[Wed Oct 26 23:43:41 2011] ../../acisf00918/products/spectra/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src12_src.pi and ../../acisf00918/products/spectra/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src12_bgd.pi exist, delete to re-create
[Wed Oct 26 23:43:41 2011] Not generating rmf since there are only 14 counts
[Wed Oct 26 23:43:44 2011] ../../acisf00918/products/lightcurves/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src12_src.lc and ../../acisf00918/products/lightcurves/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src12_bgd.lc exist, delete to re-create
[Wed Oct 26 23:44:06 2011] 188.127
[Wed Oct 26 23:44:51 2011] Updating aperture counts using extracted products
[Wed Oct 26 23:44:51 2011] Error reading totcts from fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src12_src.pi.gz
[Wed Oct 26 23:44:51 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 23:44:51 2011] Using photon index=1.80, rate=0.000132, arf fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src12.arf
[Wed Oct 26 23:44:51 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 23:44:51 2011] Updating source flux to 1.5e-15
[Wed Oct 26 23:45:30 2011] Source 12 has fewer than 100.000000 counts, skipping spectral fitting