[Wed Oct 26 23:34:41 2011] Detection parameters:
  Position = (471.3, 641.5) = 23 2 54.43 8 39 4.1
  Extent = 1.3" x 0.9", rotation angle = 6 degrees
  Source counts = 2142.7 +/- 46.9
  Background counts = 55.3
  Rate = 0.02 +/- 0.0004

[Wed Oct 26 23:34:44 2011] Off-axis axis estimate = 6.37'
[Wed Oct 26 23:36:13 2011] Using EEF radius (= 1.82 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 23:36:13 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 26 23:36:13 2011] Initial guess for spatial extent in simple fitting = 1.82"
[Wed Oct 26 23:36:13 2011] source mask rpix=3.7, npix_max = 70, mask sum = 72, frac = 1.020
[Wed Oct 26 23:36:13 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.82"
[Wed Oct 26 23:36:14 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass0_src1.ximg exists
[Wed Oct 26 23:36:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00918_pi14-548_cl_pass0_src1.csv
[Wed Oct 26 23:36:14 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Oct 26 23:36:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00918_pi14-548_cl_pass0_src1.csv
[Wed Oct 26 23:36:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00918_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00918_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 23:36:15 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Oct 26 23:36:15 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Oct 26 23:36:15 2011] Fit fullrun_ccd3_acisf00918_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Oct 26 23:36:39 2011] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 21.523799 pixels away
[Wed Oct 26 23:36:39 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 23:36:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 23:36:39 2011] Assessing source extent using major
[Wed Oct 26 23:36:39 2011] Source does appear to be extended
[Wed Oct 26 23:36:39 2011] Computing asymmetry using major and minor axis, asym = 1.51
[Wed Oct 26 23:36:39 2011] Source is asymmetric
[Wed Oct 26 23:37:13 2011] Using EEF radius (= 1.82 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 23:37:13 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 26 23:37:13 2011] Initial guess for spatial extent in simple fitting = 1.82"
[Wed Oct 26 23:37:13 2011] source mask rpix=3.7, npix_max = 70, mask sum = 72, frac = 1.020
[Wed Oct 26 23:37:13 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.82"
[Wed Oct 26 23:37:14 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass1_src1.ximg exists
[Wed Oct 26 23:37:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00918_pi14-548_cl_pass1_src1.csv
[Wed Oct 26 23:37:14 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Oct 26 23:37:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00918_pi14-548_cl_pass1_src1.csv
[Wed Oct 26 23:37:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00918_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00918_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 23:37:14 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Oct 26 23:37:14 2011] fullrun_ccd3_acisf00918_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Oct 26 23:37:14 2011] Fit fullrun_ccd3_acisf00918_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Oct 26 23:37:34 2011] Spatial fit model total counts = 2204.490000, observed total counts = 2201.000000
[Wed Oct 26 23:37:34 2011] Offset between fit and detection position for source 1 = 0.631167 pixels
[Wed Oct 26 23:37:34 2011] 2207.934000 total counts/ 206.794000 bgd. counts: snr = 139.158105
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.631167 pixels
  Position = (471.7, 641.9) = 23 2 54.43 8 39 4.0
  Extent = 1.4 (1.4-1.5)", rotation angle = 0
  Source counts = 2001.1 +/- 47.0
  Background counts = 206.8
  Rate = 0.02 +/- 0.0004
[Wed Oct 26 23:37:34 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 23:37:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 23:37:34 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 23:37:34 2011] Source does appear to be extended
[Wed Oct 26 23:37:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 23:42:36 2011] Not overwriting source region fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src1_src.reg
[Wed Oct 26 23:42:36 2011] Extracting stamp from image fullrun_ccd3_acisf00918_pi14-548_cl_sm2.00.img.gz, (408, 578) - (536, 706)
[Wed Oct 26 23:42:36 2011] Writing fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src1.gif
[Wed Oct 26 23:42:38 2011] ../../acisf00918/products/events/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src1_src.evt and ../../acisf00918/products/events/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Wed Oct 26 23:42:38 2011] Size of ../../acisf00918/products/events/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src1_src.evt.gz[events] = 2140 counts
[Wed Oct 26 23:42:38 2011] Mean chipx,y = (644.21, 292.49)
[Wed Oct 26 23:42:38 2011] Mean tdetx,y = (4839.51, 3705.21)
[Wed Oct 26 23:42:38 2011] chipx,y range = (617.00-669.00, 269.00-319.00)
[Wed Oct 26 23:42:38 2011] Size of ../../acisf00918/products/events/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 111 counts
[Wed Oct 26 23:42:38 2011] ../../acisf00918/products/images/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src1_src.img and ../../acisf00918/products/images/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Wed Oct 26 23:42:38 2011] ../../acisf00918/products/spectra/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src1_src.pi and ../../acisf00918/products/spectra/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Wed Oct 26 23:42:41 2011] ../../acisf00918/products/lightcurves/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src1_src.lc and ../../acisf00918/products/lightcurves/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Wed Oct 26 23:44:06 2011] Keeping rmf generated by specextract
[Wed Oct 26 23:44:06 2011] 181.445
[Wed Oct 26 23:44:50 2011] Updating aperture counts using extracted products
[Wed Oct 26 23:44:50 2011] Error reading totcts from fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Oct 26 23:44:51 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 23:44:51 2011] Using photon index=1.80, rate=0.0184, arf fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src1.arf
[Wed Oct 26 23:44:51 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 23:44:51 2011] Updating source flux to 2.1e-13
[Wed Oct 26 23:45:44 2011] Reading fit data from acisf00918/analysis//spectral/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src1_pl.csv
[Wed Oct 26 23:45:44 2011] Spectral fit parameter nH value = 8.81059e+20
[Wed Oct 26 23:45:44 2011] Spectral fit parameter PhoIndex value = 1.92389
[Wed Oct 26 23:45:44 2011] Failed to get F(0.3-8.0) from acisf00918/analysis//spectral/fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Oct 26 23:45:44 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 23:45:44 2011] Using Nh = 8.8e+20, photon index=1.92, rate=0.0184, arf fullrun_ccd3_acisf00918_pi14-548_pass1_cl_src1.arf
[Wed Oct 26 23:45:44 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 23:45:44 2011] Updating source flux to 2e-13