[Wed Oct 26 23:34:33 2011] Detection parameters:
  Position = (654.7, 283.3) = 23 2 52.26 8 48 9.6
  Extent = 0.8" x 0.5", rotation angle = 116 degrees
  Source counts = 140.9 +/- 12.0
  Background counts = 4.1
  Rate = 0.001 +/- 0.0001

[Wed Oct 26 23:34:35 2011] Off-axis axis estimate = 3.19'
[Wed Oct 26 23:36:07 2011] Using EEF radius (= 0.62 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 23:36:07 2011] Initial guess for spatial extent in simple fitting = 0.62"
[Wed Oct 26 23:36:07 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.967
[Wed Oct 26 23:36:07 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 0.62"
[Wed Oct 26 23:36:08 2011] fullrun_ccd0_acisf00918_pi14-548_cl_pass0_src6.ximg exists
[Wed Oct 26 23:36:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00918_pi14-548_cl_pass0_src6.csv
[Wed Oct 26 23:36:08 2011] fullrun_ccd0_acisf00918_pi14-548_cl_pass0_src6_1.ximg exists
[Wed Oct 26 23:36:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00918_pi14-548_cl_pass0_src6.csv
[Wed Oct 26 23:36:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf00918_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf00918_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 23:36:09 2011] fullrun_ccd0_acisf00918_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Wed Oct 26 23:36:09 2011] fullrun_ccd0_acisf00918_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Wed Oct 26 23:36:09 2011] Fit fullrun_ccd0_acisf00918_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Wed Oct 26 23:36:26 2011] Spatial fit model total counts = 146.491000, observed total counts = 147.000000
[Wed Oct 26 23:36:26 2011] Offset between fit and detection position for source 6 = 0.681324 pixels
[Wed Oct 26 23:36:26 2011] 147.702000 total counts/ 22.937000 bgd. counts: snr = 26.051004
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.681324 pixels
  Position = (655.2, 283.8) = 23 2 52.26 8 48 9.6
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 124.8 +/- 12.2
  Background counts = 22.9
  Rate = 0.001 +/- 0.0001
[Wed Oct 26 23:36:26 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 23:36:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 23:36:26 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 23:36:26 2011] Source does appear to be extended
[Wed Oct 26 23:36:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 23:37:07 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 23:37:07 2011] Initial guess for spatial extent in simple fitting = 0.58"
[Wed Oct 26 23:37:07 2011] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.805
[Wed Oct 26 23:37:07 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 0.58"
[Wed Oct 26 23:37:08 2011] fullrun_ccd0_acisf00918_pi14-548_cl_pass1_src6.ximg exists
[Wed Oct 26 23:37:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00918_pi14-548_cl_pass1_src6.csv
[Wed Oct 26 23:37:08 2011] fullrun_ccd0_acisf00918_pi14-548_cl_pass1_src6_1.ximg exists
[Wed Oct 26 23:37:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00918_pi14-548_cl_pass1_src6.csv
[Wed Oct 26 23:37:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf00918_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf00918_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 23:37:09 2011] fullrun_ccd0_acisf00918_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Wed Oct 26 23:37:09 2011] fullrun_ccd0_acisf00918_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Wed Oct 26 23:37:09 2011] Fit fullrun_ccd0_acisf00918_pi14-548_cl_pass1_tfrozen_src6 appears to have run properly
[Wed Oct 26 23:37:24 2011] Spatial fit model total counts = 143.505000, observed total counts = 145.000000
[Wed Oct 26 23:37:24 2011] Offset between fit and detection position for source 6 = 0.007012 pixels
[Wed Oct 26 23:37:24 2011] 144.665700 total counts/ 19.548700 bgd. counts: snr = 28.298107
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.007012 pixels
  Position = (655.2, 283.7) = 23 2 52.26 8 48 9.6
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 125.1 +/- 12.0
  Background counts = 19.5
  Rate = 0.001 +/- 0.0001
[Wed Oct 26 23:37:24 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 23:37:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 23:37:24 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 23:37:24 2011] Source does appear to be extended
[Wed Oct 26 23:37:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 23:38:04 2011] Not overwriting source region fullrun_ccd0_acisf00918_pi14-548_pass1_cl_src6_src.reg
[Wed Oct 26 23:38:04 2011] Extracting stamp from image fullrun_ccd0_acisf00918_pi14-548_cl_sm2.00.img.gz, (628, 257) - (682, 310)
[Wed Oct 26 23:38:04 2011] Writing fullrun_ccd0_acisf00918_pi14-548_pass1_cl_src6.gif
[Wed Oct 26 23:38:21 2011] ../../acisf00918/products/events/fullrun_ccd0_acisf00918_pi14-548_pass1_cl_src6_src.evt and ../../acisf00918/products/events/fullrun_ccd0_acisf00918_pi14-548_pass1_cl_src6_bgd.evt exist, delete to re-create
[Wed Oct 26 23:38:21 2011] Size of ../../acisf00918/products/events/fullrun_ccd0_acisf00918_pi14-548_pass1_cl_src6_src.evt.gz[events] = 132 counts
[Wed Oct 26 23:38:21 2011] Mean chipx,y = (750.39, 893.44)
[Wed Oct 26 23:38:21 2011] Mean tdetx,y = (3954.43, 4381.61)
[Wed Oct 26 23:38:21 2011] chipx,y range = (732.00-771.00, 875.00-912.00)
[Wed Oct 26 23:38:21 2011] Size of ../../acisf00918/products/events/fullrun_ccd0_acisf00918_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 27 counts
[Wed Oct 26 23:38:21 2011] ../../acisf00918/products/images/fullrun_ccd0_acisf00918_pi14-548_pass1_cl_src6_src.img and ../../acisf00918/products/images/fullrun_ccd0_acisf00918_pi14-548_pass1_cl_src6_bgd.img exist, delete to re-create
[Wed Oct 26 23:38:21 2011] ../../acisf00918/products/spectra/fullrun_ccd0_acisf00918_pi14-548_pass1_cl_src6_src.pi and ../../acisf00918/products/spectra/fullrun_ccd0_acisf00918_pi14-548_pass1_cl_src6_bgd.pi exist, delete to re-create
[Wed Oct 26 23:38:24 2011] ../../acisf00918/products/lightcurves/fullrun_ccd0_acisf00918_pi14-548_pass1_cl_src6_src.lc and ../../acisf00918/products/lightcurves/fullrun_ccd0_acisf00918_pi14-548_pass1_cl_src6_bgd.lc exist, delete to re-create
[Wed Oct 26 23:39:47 2011] Keeping rmf generated by specextract
[Wed Oct 26 23:39:47 2011] 201.615
[Wed Oct 26 23:44:48 2011] Updating aperture counts using extracted products
[Wed Oct 26 23:44:48 2011] Error reading totcts from fullrun_ccd0_acisf00918_pi14-548_pass1_cl_src6_src.pi.gz
[Wed Oct 26 23:44:49 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 23:44:49 2011] Using photon index=1.80, rate=0.00115, arf fullrun_ccd0_acisf00918_pi14-548_pass1_cl_src6.arf
[Wed Oct 26 23:44:49 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 23:44:49 2011] Updating source flux to 1.2e-14