[Wed Oct 26 23:34:35 2011] Detection parameters:
  Position = (810.8, 149.2) = 23 2 47.08 8 47 3.7
  Extent = 0.5" x 0.5", rotation angle = 129 degrees
  Source counts = 45.4 +/- 6.9
  Background counts = 1.6
  Rate = 0.0004 +/- 6e-05

[Wed Oct 26 23:34:35 2011] Off-axis axis estimate = 1.87'
[Wed Oct 26 23:36:07 2011] Using EEF radius (= 0.42 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 23:36:07 2011] Initial guess for spatial extent in simple fitting = 0.42"
[Wed Oct 26 23:36:07 2011] source mask rpix=0.8, npix_max = 7, mask sum = 9, frac = 1.237
[Wed Oct 26 23:36:07 2011] Giving source the simple spatial ID 31 for pass 0, mean size = 0.42"
[Wed Oct 26 23:36:09 2011] fullrun_ccd0_acisf00918_pi14-548_cl_pass0_src31.ximg exists
[Wed Oct 26 23:36:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00918_pi14-548_cl_pass0_src31.csv
[Wed Oct 26 23:36:09 2011] fullrun_ccd0_acisf00918_pi14-548_cl_pass0_src31_1.ximg exists
[Wed Oct 26 23:36:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00918_pi14-548_cl_pass0_src31.csv
[Wed Oct 26 23:36:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf00918_pi14-548_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf00918_pi14-548_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 23:36:09 2011] fullrun_ccd0_acisf00918_pi14-548_cl_pass0_tfrozen_src31.ximg exists
[Wed Oct 26 23:36:09 2011] fullrun_ccd0_acisf00918_pi14-548_cl_pass0_tfrozen_src31_1.ximg exists
[Wed Oct 26 23:36:09 2011] Fit fullrun_ccd0_acisf00918_pi14-548_cl_pass0_tfrozen_src31 appears to have run properly
[Wed Oct 26 23:36:26 2011] Spatial fit model total counts = 47.901100, observed total counts = 50.000000
[Wed Oct 26 23:36:26 2011] Offset between fit and detection position for source 32 = 0.630607 pixels
[Wed Oct 26 23:36:26 2011] 48.645560 total counts/ 4.624460 bgd. counts: snr = 20.470591
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 0.630607 pixels
  Position = (811.2, 149.7) = 23 2 47.08 8 47 3.6
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 44.0 +/- 7.0
  Background counts = 4.6
  Rate = 0.0004 +/- 6e-05
[Wed Oct 26 23:36:26 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 23:36:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 23:36:26 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 23:36:26 2011] Source does appear to be extended
[Wed Oct 26 23:36:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 23:37:07 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 23:37:07 2011] Initial guess for spatial extent in simple fitting = 0.47"
[Wed Oct 26 23:37:07 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.052
[Wed Oct 26 23:37:07 2011] Giving source the simple spatial ID 30 for pass 1, mean size = 0.47"
[Wed Oct 26 23:37:08 2011] fullrun_ccd0_acisf00918_pi14-548_cl_pass1_src30.ximg exists
[Wed Oct 26 23:37:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00918_pi14-548_cl_pass1_src30.csv
[Wed Oct 26 23:37:08 2011] fullrun_ccd0_acisf00918_pi14-548_cl_pass1_src30_1.ximg exists
[Wed Oct 26 23:37:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00918_pi14-548_cl_pass1_src30.csv
[Wed Oct 26 23:37:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf00918_pi14-548_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf00918_pi14-548_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 23:37:09 2011] fullrun_ccd0_acisf00918_pi14-548_cl_pass1_tfrozen_src30.ximg exists
[Wed Oct 26 23:37:09 2011] fullrun_ccd0_acisf00918_pi14-548_cl_pass1_tfrozen_src30_1.ximg exists
[Wed Oct 26 23:37:09 2011] Fit fullrun_ccd0_acisf00918_pi14-548_cl_pass1_tfrozen_src30 appears to have run properly
[Wed Oct 26 23:37:24 2011] Spatial fit model total counts = 47.954500, observed total counts = 50.000000
[Wed Oct 26 23:37:24 2011] Offset between fit and detection position for source 32 = 0.013244 pixels
[Wed Oct 26 23:37:24 2011] 48.778290 total counts/ 4.791390 bgd. counts: snr = 20.095212
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 0.013244 pixels
  Position = (811.2, 149.7) = 23 2 47.08 8 47 3.6
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 44.0 +/- 7.0
  Background counts = 4.8
  Rate = 0.0004 +/- 6e-05
[Wed Oct 26 23:37:24 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 23:37:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 23:37:24 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 23:37:24 2011] Source does appear to be extended
[Wed Oct 26 23:37:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 23:38:05 2011] Not overwriting source region fullrun_ccd0_acisf00918_pi14-548_pass1_cl_src32_src.reg
[Wed Oct 26 23:38:05 2011] Extracting stamp from image fullrun_ccd0_acisf00918_pi14-548_cl_sm2.00.img.gz, (789, 128) - (833, 172)
[Wed Oct 26 23:38:05 2011] Writing fullrun_ccd0_acisf00918_pi14-548_pass1_cl_src32.gif
[Wed Oct 26 23:39:35 2011] ../../acisf00918/products/events/fullrun_ccd0_acisf00918_pi14-548_pass1_cl_src32_src.evt and ../../acisf00918/products/events/fullrun_ccd0_acisf00918_pi14-548_pass1_cl_src32_bgd.evt exist, delete to re-create
[Wed Oct 26 23:39:35 2011] Size of ../../acisf00918/products/events/fullrun_ccd0_acisf00918_pi14-548_pass1_cl_src32_src.evt.gz[events] = 47 counts
[Wed Oct 26 23:39:35 2011] Mean chipx,y = (959.17, 895.64)
[Wed Oct 26 23:39:35 2011] Mean tdetx,y = (3956.64, 4172.83)
[Wed Oct 26 23:39:35 2011] chipx,y range = (941.00-976.00, 877.00-912.00)
[Wed Oct 26 23:39:35 2011] Size of ../../acisf00918/products/events/fullrun_ccd0_acisf00918_pi14-548_pass1_cl_src32_bgd.evt.gz[events] = 18 counts
[Wed Oct 26 23:39:35 2011] ../../acisf00918/products/images/fullrun_ccd0_acisf00918_pi14-548_pass1_cl_src32_src.img and ../../acisf00918/products/images/fullrun_ccd0_acisf00918_pi14-548_pass1_cl_src32_bgd.img exist, delete to re-create
[Wed Oct 26 23:39:35 2011] ../../acisf00918/products/spectra/fullrun_ccd0_acisf00918_pi14-548_pass1_cl_src32_src.pi and ../../acisf00918/products/spectra/fullrun_ccd0_acisf00918_pi14-548_pass1_cl_src32_bgd.pi exist, delete to re-create
[Wed Oct 26 23:39:35 2011] Not generating rmf since there are only 43 counts
[Wed Oct 26 23:39:38 2011] ../../acisf00918/products/lightcurves/fullrun_ccd0_acisf00918_pi14-548_pass1_cl_src32_src.lc and ../../acisf00918/products/lightcurves/fullrun_ccd0_acisf00918_pi14-548_pass1_cl_src32_bgd.lc exist, delete to re-create
[Wed Oct 26 23:39:48 2011] 206.605
[Wed Oct 26 23:44:49 2011] Updating aperture counts using extracted products
[Wed Oct 26 23:44:49 2011] Error reading totcts from fullrun_ccd0_acisf00918_pi14-548_pass1_cl_src32_src.pi.gz
[Wed Oct 26 23:44:49 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 23:44:49 2011] Using photon index=1.80, rate=0.000405, arf fullrun_ccd0_acisf00918_pi14-548_pass1_cl_src32.arf
[Wed Oct 26 23:44:49 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 23:44:49 2011] Updating source flux to 4.2e-15
[Wed Oct 26 23:44:56 2011] Source 32 has fewer than 100.000000 counts, skipping spectral fitting