[Wed Oct 26 23:34:33 2011] Detection parameters:
  Position = (931.9, 682.2) = 23 2 43.06 8 51 25.9
  Extent = 1.7" x 1.5", rotation angle = 87 degrees
  Source counts = 47.3 +/- 7.5
  Background counts = 8.7
  Rate = 0.0004 +/- 7e-05

[Wed Oct 26 23:34:35 2011] Off-axis axis estimate = 6.33'
[Wed Oct 26 23:36:07 2011] Using EEF radius (= 1.80 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 23:36:07 2011] Initial guess for spatial extent in simple fitting = 1.80"
[Wed Oct 26 23:36:07 2011] source mask rpix=3.7, npix_max = 69, mask sum = 64, frac = 0.926
[Wed Oct 26 23:36:07 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 1.80"
[Wed Oct 26 23:36:09 2011] fullrun_ccd0_acisf00918_pi14-548_cl_pass0_src10.ximg exists
[Wed Oct 26 23:36:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00918_pi14-548_cl_pass0_src10.csv
[Wed Oct 26 23:36:09 2011] fullrun_ccd0_acisf00918_pi14-548_cl_pass0_src10_1.ximg exists
[Wed Oct 26 23:36:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00918_pi14-548_cl_pass0_src10.csv
[Wed Oct 26 23:36:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf00918_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf00918_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 23:36:09 2011] fullrun_ccd0_acisf00918_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Wed Oct 26 23:36:09 2011] fullrun_ccd0_acisf00918_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Wed Oct 26 23:36:09 2011] Fit fullrun_ccd0_acisf00918_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Wed Oct 26 23:36:26 2011] Spatial fit model total counts = 56.124600, observed total counts = 57.000000
[Wed Oct 26 23:36:26 2011] Offset between fit and detection position for source 10 = 1.572558 pixels
[Wed Oct 26 23:36:26 2011] 54.804700 total counts/ 10.332300 bgd. counts: snr = 13.835411
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 1.572558 pixels
  Position = (932.6, 683.6) = 23 2 43.05 8 51 26.3
  Extent = 1.6 (1.2-2.3)", rotation angle = 0
  Source counts = 44.5 +/- 7.4
  Background counts = 10.3
  Rate = 0.0004 +/- 7e-05
[Wed Oct 26 23:36:26 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 23:36:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 23:36:26 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 23:36:26 2011] Source does appear to be extended
[Wed Oct 26 23:36:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 23:37:07 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 23:37:07 2011] Initial guess for spatial extent in simple fitting = 1.61"
[Wed Oct 26 23:37:07 2011] source mask rpix=3.3, npix_max = 57, mask sum = 49, frac = 0.858
[Wed Oct 26 23:37:07 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 1.61"
[Wed Oct 26 23:37:08 2011] fullrun_ccd0_acisf00918_pi14-548_cl_pass1_src10.ximg exists
[Wed Oct 26 23:37:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00918_pi14-548_cl_pass1_src10.csv
[Wed Oct 26 23:37:08 2011] fullrun_ccd0_acisf00918_pi14-548_cl_pass1_src10_1.ximg exists
[Wed Oct 26 23:37:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00918_pi14-548_cl_pass1_src10.csv
[Wed Oct 26 23:37:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf00918_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf00918_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 23:37:09 2011] fullrun_ccd0_acisf00918_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Wed Oct 26 23:37:09 2011] fullrun_ccd0_acisf00918_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Wed Oct 26 23:37:09 2011] Fit fullrun_ccd0_acisf00918_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Wed Oct 26 23:37:24 2011] Spatial fit model total counts = 52.508300, observed total counts = 53.000000
[Wed Oct 26 23:37:24 2011] Offset between fit and detection position for source 10 = 0.043661 pixels
[Wed Oct 26 23:37:24 2011] 51.302150 total counts/ 6.530250 bgd. counts: snr = 17.520263
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.043661 pixels
  Position = (932.6, 683.7) = 23 2 43.05 8 51 26.3
  Extent = 1.6 (1.2-2.2)", rotation angle = 0
  Source counts = 44.8 +/- 7.2
  Background counts = 6.5
  Rate = 0.0004 +/- 7e-05
[Wed Oct 26 23:37:24 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 23:37:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 23:37:24 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 23:37:24 2011] Source does appear to be extended
[Wed Oct 26 23:37:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 23:38:05 2011] Not overwriting source region fullrun_ccd0_acisf00918_pi14-548_pass1_cl_src10_src.reg
[Wed Oct 26 23:38:05 2011] Extracting stamp from image fullrun_ccd0_acisf00918_pi14-548_cl_sm2.00.img.gz, (859, 610) - (1006, 757)
[Wed Oct 26 23:38:05 2011] Writing fullrun_ccd0_acisf00918_pi14-548_pass1_cl_src10.gif
[Wed Oct 26 23:38:35 2011] ../../acisf00918/products/events/fullrun_ccd0_acisf00918_pi14-548_pass1_cl_src10_src.evt and ../../acisf00918/products/events/fullrun_ccd0_acisf00918_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Wed Oct 26 23:38:35 2011] Size of ../../acisf00918/products/events/fullrun_ccd0_acisf00918_pi14-548_pass1_cl_src10_src.evt.gz[events] = 58 counts
[Wed Oct 26 23:38:35 2011] Mean chipx,y = (700.31, 408.76)
[Wed Oct 26 23:38:35 2011] Mean tdetx,y = (3469.76, 4431.69)
[Wed Oct 26 23:38:35 2011] chipx,y range = (678.00-725.00, 385.00-430.00)
[Wed Oct 26 23:38:35 2011] Size of ../../acisf00918/products/events/fullrun_ccd0_acisf00918_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 121 counts
[Wed Oct 26 23:38:35 2011] ../../acisf00918/products/images/fullrun_ccd0_acisf00918_pi14-548_pass1_cl_src10_src.img and ../../acisf00918/products/images/fullrun_ccd0_acisf00918_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Wed Oct 26 23:38:35 2011] ../../acisf00918/products/spectra/fullrun_ccd0_acisf00918_pi14-548_pass1_cl_src10_src.pi and ../../acisf00918/products/spectra/fullrun_ccd0_acisf00918_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Wed Oct 26 23:38:35 2011] Not generating rmf since there are only 44 counts
[Wed Oct 26 23:38:38 2011] ../../acisf00918/products/lightcurves/fullrun_ccd0_acisf00918_pi14-548_pass1_cl_src10_src.lc and ../../acisf00918/products/lightcurves/fullrun_ccd0_acisf00918_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Wed Oct 26 23:39:47 2011] 187.67
[Wed Oct 26 23:44:48 2011] Updating aperture counts using extracted products
[Wed Oct 26 23:44:48 2011] Error reading totcts from fullrun_ccd0_acisf00918_pi14-548_pass1_cl_src10_src.pi.gz
[Wed Oct 26 23:44:49 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 23:44:49 2011] Using photon index=1.80, rate=0.000412, arf fullrun_ccd0_acisf00918_pi14-548_pass1_cl_src10.arf
[Wed Oct 26 23:44:49 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 23:44:49 2011] Updating source flux to 4.6e-15
[Wed Oct 26 23:44:56 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting