[Mon Oct  3 11:25:33 2011] Detection parameters:
  Position = (1031.5, 31.7) = 17 45 38.30 -29 0 48.7
  Extent = 0.5" x 0.5", rotation angle = 37 degrees
  Source counts = 15.6 +/- 4.9
  Background counts = 8.4
  Rate = 0.0006 +/- 0.0002

[Mon Oct  3 11:25:36 2011] Off-axis axis estimate = 0.57'
[Mon Oct  3 11:27:08 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Mon Oct  3 11:27:08 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Mon Oct  3 11:27:08 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.350
[Mon Oct  3 11:27:08 2011] Giving source the simple spatial ID 51 for pass 0, mean size = 0.39"
[Mon Oct  3 11:27:11 2011] fullrun_ccd3_acisf09173_pi14-548_cl_pass0_src51.ximg exists
[Mon Oct  3 11:27:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09173_pi14-548_cl_pass0_src51.csv
[Mon Oct  3 11:27:11 2011] fullrun_ccd3_acisf09173_pi14-548_cl_pass0_src51_1.ximg exists
[Mon Oct  3 11:27:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09173_pi14-548_cl_pass0_src51.csv
[Mon Oct  3 11:27:11 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09173_pi14-548_cl_pass0_src51_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09173_pi14-548_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct  3 11:27:12 2011] fullrun_ccd3_acisf09173_pi14-548_cl_pass0_tfrozen_src51.ximg exists
[Mon Oct  3 11:27:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09173_pi14-548_cl_pass0_tfrozen_src51.csv
[Mon Oct  3 11:27:12 2011] fullrun_ccd3_acisf09173_pi14-548_cl_pass0_tfrozen_src51_1.ximg exists
[Mon Oct  3 11:27:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09173_pi14-548_cl_pass0_tfrozen_src51.csv
[Mon Oct  3 11:27:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09173_pi14-548_cl_pass0_tfrozen_src51_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09173_pi14-548_cl_pass0_tfrozen_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct  3 11:27:35 2011] Spatial fit model total counts = 64.147500, observed total counts = 43.000000
[Mon Oct  3 11:27:35 2011] Poor agreement between spatial fit and data for source 29
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Oct  3 11:27:35 2011] Vigneting correction estimate = 1.000000
[Mon Oct  3 11:27:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct  3 11:27:35 2011] Assessing source extent using major
[Mon Oct  3 11:27:35 2011] Source does appear to be extended
[Mon Oct  3 11:27:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct  3 11:28:04 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Mon Oct  3 11:28:04 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Mon Oct  3 11:28:04 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.350
[Mon Oct  3 11:28:04 2011] Giving source the simple spatial ID 49 for pass 1, mean size = 0.39"
[Mon Oct  3 11:28:06 2011] fullrun_ccd3_acisf09173_pi14-548_cl_pass1_src49.ximg exists
[Mon Oct  3 11:28:06 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf09173_pi14-548_cl_pass1_src49.csv
[Mon Oct  3 11:28:06 2011] fullrun_ccd3_acisf09173_pi14-548_cl_pass1_src49_1.ximg exists
[Mon Oct  3 11:28:06 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf09173_pi14-548_cl_pass1_src49.csv
[Mon Oct  3 11:28:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09173_pi14-548_cl_pass1_src49_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09173_pi14-548_cl_pass1_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct  3 11:28:08 2011] fullrun_ccd3_acisf09173_pi14-548_cl_pass1_tfrozen_src49.ximg exists
[Mon Oct  3 11:28:08 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf09173_pi14-548_cl_pass1_tfrozen_src49.csv
[Mon Oct  3 11:28:08 2011] fullrun_ccd3_acisf09173_pi14-548_cl_pass1_tfrozen_src49_1.ximg exists
[Mon Oct  3 11:28:08 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf09173_pi14-548_cl_pass1_tfrozen_src49.csv
[Mon Oct  3 11:28:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09173_pi14-548_cl_pass1_tfrozen_src49_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09173_pi14-548_cl_pass1_tfrozen_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct  3 11:28:30 2011] Spatial fit model total counts = -3.443060, observed total counts = 43.000000
[Mon Oct  3 11:28:30 2011] Poor agreement between spatial fit and data for source 29
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Oct  3 11:28:30 2011] Vigneting correction estimate = 1.000000
[Mon Oct  3 11:28:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct  3 11:28:30 2011] Assessing source extent using major
[Mon Oct  3 11:28:30 2011] Source does appear to be extended
[Mon Oct  3 11:28:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct  3 11:59:00 2011] Not overwriting source region fullrun_ccd3_acisf09173_pi14-548_pass1_cl_src29_src.reg
[Mon Oct  3 11:59:00 2011] Extracting stamp from image fullrun_ccd3_acisf09173_pi14-548_cl_sm2.00.img.gz, (1009, 9) - (1054, 54)
[Mon Oct  3 11:59:00 2011] Writing fullrun_ccd3_acisf09173_pi14-548_pass1_cl_src29.gif
[Mon Oct  3 12:25:07 2011] ../../acisf09173/products/events/fullrun_ccd3_acisf09173_pi14-548_pass1_cl_src29_src.evt and ../../acisf09173/products/events/fullrun_ccd3_acisf09173_pi14-548_pass1_cl_src29_bgd.evt exist, delete to re-create
[Mon Oct  3 12:25:07 2011] Size of ../../acisf09173/products/events/fullrun_ccd3_acisf09173_pi14-548_pass1_cl_src29_src.evt.gz[events] = 24 counts
[Mon Oct  3 12:25:07 2011] Mean chipx,y = (1011.83, 1000.21)
[Mon Oct  3 12:25:07 2011] Mean tdetx,y = (4131.79, 4072.83)
[Mon Oct  3 12:25:07 2011] chipx,y range = (1004.00-1023.00, 987.00-1019.00)
[Mon Oct  3 12:25:07 2011] Size of ../../acisf09173/products/events/fullrun_ccd3_acisf09173_pi14-548_pass1_cl_src29_bgd.evt.gz[events] = 56 counts
[Mon Oct  3 12:25:07 2011] ../../acisf09173/products/images/fullrun_ccd3_acisf09173_pi14-548_pass1_cl_src29_src.img and ../../acisf09173/products/images/fullrun_ccd3_acisf09173_pi14-548_pass1_cl_src29_bgd.img exist, delete to re-create
[Mon Oct  3 12:25:07 2011] Not generating rmf since there are only 15 counts
[Mon Oct  3 12:25:07 2011] arf not found, will run specextract
[Mon Oct  3 12:25:35 2011] ../../acisf09173/products/spectra/fullrun_ccd3_acisf09173_pi14-548_pass1_cl_src29.warf not found
[Mon Oct  3 12:25:35 2011] ../../acisf09173/products/spectra/fullrun_ccd3_acisf09173_pi14-548_pass1_cl_src29.wrmf not found
[Mon Oct  3 12:25:35 2011] Removal of ../../acisf09173/products/spectra/fullrun_ccd3_acisf09173_pi14-548_pass1_cl_src29.soff failed
[Mon Oct  3 12:25:44 2011] ../../acisf09173/products/lightcurves/fullrun_ccd3_acisf09173_pi14-548_pass1_cl_src29_src.lc and ../../acisf09173/products/lightcurves/fullrun_ccd3_acisf09173_pi14-548_pass1_cl_src29_bgd.lc exist, delete to re-create
[Mon Oct  3 12:26:40 2011] Spectrum 29 has only 16 counts, deleting rmf
[Mon Oct  3 12:26:40 2011] 103.119
[Mon Oct  3 12:27:02 2011] Updating aperture counts using extracted products
[Mon Oct  3 12:27:02 2011] Error reading totcts from fullrun_ccd3_acisf09173_pi14-548_pass1_cl_src29_src.pi.gz
[Mon Oct  3 12:27:02 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct  3 12:27:02 2011] Using photon index=1.80, rate=0.00056, arf fullrun_ccd3_acisf09173_pi14-548_pass1_cl_src29.arf
[Mon Oct  3 12:27:02 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct  3 12:27:02 2011] Updating source flux to 1.7e-14
[Mon Oct  3 12:27:31 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting