[Tue Feb 14 00:34:24 2012] Detection parameters:
  Position = (322.4, 404.7) = 17 45 36.13 -28 56 38.5
  Extent = 0.7" x 0.5", rotation angle = 123 degrees
  Source counts = 101.0 +/- 10.2
  Background counts = 3.0
  Rate = 0.004 +/- 0.0004

[Tue Feb 14 00:34:25 2012] Off-axis axis estimate = 3.43'
[Tue Feb 14 01:31:51 2012] Using EEF radius (= 0.68 ")to estimate initial spatial extent for simple fitting
[Tue Feb 14 01:31:51 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Feb 14 01:31:51 2012] Initial guess for spatial extent in simple fitting = 0.68"
[Tue Feb 14 01:31:51 2012] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.856
[Tue Feb 14 01:31:51 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 0.68"
[Tue Feb 14 01:58:54 2012] fullrun_ccd2_acisf09171_pi14-548_cl_pass0_src1.ximg exists
[Tue Feb 14 01:58:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09171_pi14-548_cl_pass0_src1.csv
[Tue Feb 14 01:58:54 2012] fullrun_ccd2_acisf09171_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Feb 14 01:58:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09171_pi14-548_cl_pass0_src1.csv
[Tue Feb 14 01:58:55 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf09171_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf09171_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 01:58:55 2012] fullrun_ccd2_acisf09171_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Feb 14 01:58:55 2012] fullrun_ccd2_acisf09171_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Feb 14 01:58:55 2012] Fit fullrun_ccd2_acisf09171_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Feb 14 02:40:03 2012] Spatial fit model total counts = 109.869000, observed total counts = 108.000000
[Tue Feb 14 02:40:03 2012] Offset between fit and detection position for source 9 = 0.630669 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.630669 pixels
  Position = (322.8, 405.2) = 17 45 36.14 -28 56 38.5
  Extent = 0.8 (0.7-0.9)", rotation angle = 0
  Source counts = 109.9 +/- 10.5
  Background counts = 0.0
  Rate = 0.004 +/- 0.0004
[Tue Feb 14 02:40:03 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 02:40:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 02:40:03 2012] Assessing source extent using major axis lower bound
[Tue Feb 14 02:40:03 2012] Source does appear to be extended
[Tue Feb 14 02:40:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 14 03:27:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 14 03:27:05 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Feb 14 03:27:05 2012] Initial guess for spatial extent in simple fitting = 0.79"
[Tue Feb 14 03:27:05 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.897
[Tue Feb 14 03:27:05 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 0.79"
[Tue Feb 14 03:50:43 2012] fullrun_ccd2_acisf09171_pi14-548_cl_pass1_src1.ximg exists
[Tue Feb 14 03:50:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09171_pi14-548_cl_pass1_src1.csv
[Tue Feb 14 03:50:43 2012] fullrun_ccd2_acisf09171_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Feb 14 03:50:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09171_pi14-548_cl_pass1_src1.csv
[Tue Feb 14 03:50:43 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf09171_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf09171_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 03:50:43 2012] fullrun_ccd2_acisf09171_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Feb 14 03:50:43 2012] fullrun_ccd2_acisf09171_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Feb 14 03:50:43 2012] Fit fullrun_ccd2_acisf09171_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Feb 14 04:17:21 2012] Spatial fit model total counts = 106.986000, observed total counts = 108.000000
[Tue Feb 14 04:17:21 2012] Offset between fit and detection position for source 9 = 0.032972 pixels
[Tue Feb 14 04:17:21 2012] 106.970927 total counts/ 0.004927 bgd. counts: snr = 1523.866712
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.032972 pixels
  Position = (322.8, 405.2) = 17 45 36.14 -28 56 38.5
  Extent = 0.8 (0.7-0.9)", rotation angle = 0
  Source counts = 107.0 +/- 10.3
  Background counts = 0.0
  Rate = 0.004 +/- 0.0004
[Tue Feb 14 04:17:21 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 04:17:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 04:17:21 2012] Assessing source extent using major axis lower bound
[Tue Feb 14 04:17:21 2012] Source does appear to be extended
[Tue Feb 14 04:17:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 14 04:39:57 2012] Writing source region out to fullrun_ccd2_acisf09171_pi14-548_pass1_cl_src9_src.reg
[Tue Feb 14 04:39:57 2012] Extracting stamp from image fullrun_ccd2_acisf09171_pi14-548_cl_sm2.00.img.gz, (287, 369) - (359, 441)
[Tue Feb 14 04:39:57 2012] Writing fullrun_ccd2_acisf09171_pi14-548_pass1_cl_src9.gif
[Tue Feb 14 04:40:00 2012] Size of ../../acisf09171/products/events/fullrun_ccd2_acisf09171_pi14-548_pass1_cl_src9_src.evt.gz[events] = 108 counts
[Tue Feb 14 04:40:00 2012] Mean chipx,y = (222.01, 658.72)
[Tue Feb 14 04:40:00 2012] Mean tdetx,y = (3719.72, 3863.99)
[Tue Feb 14 04:40:00 2012] chipx,y range = (203.00-240.00, 642.00-677.00)
[Tue Feb 14 04:40:00 2012] Size of ../../acisf09171/products/events/fullrun_ccd2_acisf09171_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 37 counts
[Tue Feb 14 04:40:01 2012] rmf not found, will run specextract
[Tue Feb 14 04:40:01 2012] arf not found, will run specextract
[Tue Feb 14 04:40:27 2012] ../../acisf09171/products/spectra/fullrun_ccd2_acisf09171_pi14-548_pass1_cl_src9.warf not found
[Tue Feb 14 04:40:27 2012] ../../acisf09171/products/spectra/fullrun_ccd2_acisf09171_pi14-548_pass1_cl_src9.wrmf not found
[Tue Feb 14 04:40:27 2012] Removal of ../../acisf09171/products/spectra/fullrun_ccd2_acisf09171_pi14-548_pass1_cl_src9.soff failed
[Tue Feb 14 05:01:58 2012] Keeping rmf generated by specextract
[Tue Feb 14 05:01:58 2012] 187.478
[Tue Feb 14 05:13:44 2012] Updating aperture counts using extracted products
[Tue Feb 14 05:13:44 2012] Error reading totcts from fullrun_ccd2_acisf09171_pi14-548_pass1_cl_src9_src.pi.gz
[Tue Feb 14 05:13:44 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 14 05:13:44 2012] Using photon index=1.80, rate=0.00386, arf fullrun_ccd2_acisf09171_pi14-548_pass1_cl_src9.arf
[Tue Feb 14 05:13:44 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 14 05:13:44 2012] Updating source flux to 6.3e-14
[Tue Feb 14 05:14:07 2012] Reading fit data from acisf09171/analysis//spectral/fullrun_ccd2_acisf09171_pi14-548_pass1_cl_src9_pl.csv
[Tue Feb 14 05:14:07 2012] Spectral fit parameter nH value = 3.64278e+22
[Tue Feb 14 05:14:07 2012] Spectral fit parameter PhoIndex value = 2.41722
[Tue Feb 14 05:14:07 2012] Failed to get F(0.3-8.0) from acisf09171/analysis//spectral/fullrun_ccd2_acisf09171_pi14-548_pass1_cl_src9_pl.csv, possibly due to different flux energy range selected
[Tue Feb 14 05:14:07 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 14 05:14:07 2012] Using Nh = 3.6e+22, photon index=2.42, rate=0.00386, arf fullrun_ccd2_acisf09171_pi14-548_pass1_cl_src9.arf
[Tue Feb 14 05:14:07 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 14 05:14:07 2012] Updating source flux to 7.6e-14