[Tue Feb 14 00:34:22 2012] Detection parameters:
  Position = (826.3, 802.1) = 17 45 50.32 -29 2 57.1
  Extent = 1.1" x 0.6", rotation angle = 141 degrees
  Source counts = 14.3 +/- 4.5
  Background counts = 5.7
  Rate = 0.0005 +/- 0.0002

[Tue Feb 14 00:34:22 2012] Off-axis axis estimate = 3.78'
[Tue Feb 14 01:12:09 2012] Using EEF radius (= 0.77 ")to estimate initial spatial extent for simple fitting
[Tue Feb 14 01:12:09 2012] Initial guess for spatial extent in simple fitting = 0.77"
[Tue Feb 14 01:12:09 2012] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.947
[Tue Feb 14 01:12:09 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 0.77"
[Tue Feb 14 01:31:51 2012] fullrun_ccd1_acisf09171_pi14-548_cl_pass0_src11.ximg exists
[Tue Feb 14 01:31:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf09171_pi14-548_cl_pass0_src11.csv
[Tue Feb 14 01:31:51 2012] fullrun_ccd1_acisf09171_pi14-548_cl_pass0_src11_1.ximg exists
[Tue Feb 14 01:31:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf09171_pi14-548_cl_pass0_src11.csv
[Tue Feb 14 01:31:51 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf09171_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf09171_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 01:31:51 2012] fullrun_ccd1_acisf09171_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Tue Feb 14 01:31:51 2012] fullrun_ccd1_acisf09171_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Tue Feb 14 01:31:51 2012] Fit fullrun_ccd1_acisf09171_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Tue Feb 14 02:39:59 2012] Spatial fit model total counts = 26.997400, observed total counts = 27.000000
[Tue Feb 14 02:39:59 2012] Offset between fit and detection position for source 20 = 1.194914 pixels
[Tue Feb 14 02:39:59 2012] 27.825500 total counts/ 14.367200 bgd. counts: snr = 3.550620
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 1.194914 pixels
  Position = (826.1, 803.3) = 17 45 50.34 -29 2 56.7
  Extent = 0.9 (0.5-1.5)", rotation angle = 0
  Source counts = 13.5 +/- 5.3
  Background counts = 14.4
  Rate = 0.0005 +/- 0.0002
[Tue Feb 14 02:39:59 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 02:39:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 02:39:59 2012] Assessing source extent using major axis lower bound
[Tue Feb 14 02:39:59 2012] Source does appear to be extended
[Tue Feb 14 02:39:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 14 03:08:04 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 14 03:08:04 2012] Initial guess for spatial extent in simple fitting = 0.86"
[Tue Feb 14 03:08:04 2012] source mask rpix=1.7, npix_max = 20, mask sum = 20, frac = 0.993
[Tue Feb 14 03:08:04 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 0.86"
[Tue Feb 14 03:27:04 2012] fullrun_ccd1_acisf09171_pi14-548_cl_pass1_src11.ximg exists
[Tue Feb 14 03:27:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf09171_pi14-548_cl_pass1_src11.csv
[Tue Feb 14 03:27:04 2012] fullrun_ccd1_acisf09171_pi14-548_cl_pass1_src11_1.ximg exists
[Tue Feb 14 03:27:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf09171_pi14-548_cl_pass1_src11.csv
[Tue Feb 14 03:27:04 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf09171_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf09171_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 03:27:05 2012] fullrun_ccd1_acisf09171_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Tue Feb 14 03:27:05 2012] fullrun_ccd1_acisf09171_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Tue Feb 14 03:27:05 2012] Fit fullrun_ccd1_acisf09171_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Tue Feb 14 04:17:18 2012] Spatial fit model total counts = 28.975200, observed total counts = 29.000000
[Tue Feb 14 04:17:18 2012] Offset between fit and detection position for source 20 = 0.142772 pixels
[Tue Feb 14 04:17:18 2012] 29.798000 total counts/ 17.195100 bgd. counts: snr = 3.039262
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.142772 pixels
  Position = (826.0, 803.3) = 17 45 50.35 -29 2 56.7
  Extent = 0.8 (0.5-1.3)", rotation angle = 0
  Source counts = 12.6 +/- 5.5
  Background counts = 17.2
  Rate = 0.0005 +/- 0.0002
[Tue Feb 14 04:17:18 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 04:17:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 04:17:18 2012] Assessing source extent using major axis lower bound
[Tue Feb 14 04:17:18 2012] Source does appear to be extended
[Tue Feb 14 04:17:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 14 04:29:27 2012] Writing source region out to fullrun_ccd1_acisf09171_pi14-548_pass1_cl_src20_src.reg
[Tue Feb 14 04:29:27 2012] Extracting stamp from image fullrun_ccd1_acisf09171_pi14-548_cl_sm2.00.img.gz, (788, 766) - (864, 841)
[Tue Feb 14 04:29:27 2012] Writing fullrun_ccd1_acisf09171_pi14-548_pass1_cl_src20.gif
[Tue Feb 14 04:34:28 2012] Size of ../../acisf09171/products/events/fullrun_ccd1_acisf09171_pi14-548_pass1_cl_src20_src.evt.gz[events] = 21 counts
[Tue Feb 14 04:34:28 2012] Mean chipx,y = (239.95, 700.38)
[Tue Feb 14 04:34:28 2012] Mean tdetx,y = (4431.62, 4346.95)
[Tue Feb 14 04:34:28 2012] chipx,y range = (223.00-259.00, 686.00-721.00)
[Tue Feb 14 04:34:28 2012] Size of ../../acisf09171/products/events/fullrun_ccd1_acisf09171_pi14-548_pass1_cl_src20_bgd.evt.gz[events] = 133 counts
[Tue Feb 14 04:34:29 2012] Not generating rmf since there are only 12 counts
[Tue Feb 14 04:34:29 2012] arf not found, will run specextract
[Tue Feb 14 04:34:53 2012] ../../acisf09171/products/spectra/fullrun_ccd1_acisf09171_pi14-548_pass1_cl_src20.warf not found
[Tue Feb 14 04:34:53 2012] ../../acisf09171/products/spectra/fullrun_ccd1_acisf09171_pi14-548_pass1_cl_src20.wrmf not found
[Tue Feb 14 04:34:53 2012] Removal of ../../acisf09171/products/spectra/fullrun_ccd1_acisf09171_pi14-548_pass1_cl_src20.soff failed
[Tue Feb 14 04:39:57 2012] Spectrum 20 has only 13 counts, deleting rmf
[Tue Feb 14 04:39:57 2012] 186.316
[Tue Feb 14 05:13:44 2012] Updating aperture counts using extracted products
[Tue Feb 14 05:13:44 2012] Error reading totcts from fullrun_ccd1_acisf09171_pi14-548_pass1_cl_src20_src.pi.gz
[Tue Feb 14 05:13:44 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 14 05:13:44 2012] Using photon index=1.80, rate=0.000455, arf fullrun_ccd1_acisf09171_pi14-548_pass1_cl_src20.arf
[Tue Feb 14 05:13:44 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 14 05:13:44 2012] Updating source flux to 7.5e-15
[Tue Feb 14 05:14:01 2012] Source 20 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Feb 14 05:14:02 2012] acisf09171/analysis//spectral/fullrun_ccd1_acisf09171_pi14-548_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete