[Tue Feb 14 00:34:21 2012] Detection parameters:
  Position = (598.6, 259.8) = 17 45 58.87 -29 7 23.8
  Extent = 2.2" x 1.6", rotation angle = 25 degrees
  Source counts = 57.7 +/- 9.0
  Background counts = 23.3
  Rate = 0.002 +/- 0.0003

[Tue Feb 14 00:34:22 2012] Off-axis axis estimate = 8.52'
[Tue Feb 14 01:12:09 2012] Using EEF radius (= 3.21 ")to estimate initial spatial extent for simple fitting
[Tue Feb 14 01:12:09 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Feb 14 01:12:09 2012] Initial guess for spatial extent in simple fitting = 3.21"
[Tue Feb 14 01:12:09 2012] source mask rpix=6.5, npix_max = 197, mask sum = 196, frac = 0.993
[Tue Feb 14 01:12:09 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 3.21"
[Tue Feb 14 01:31:51 2012] fullrun_ccd1_acisf09171_pi14-548_cl_pass0_src1.ximg exists
[Tue Feb 14 01:31:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf09171_pi14-548_cl_pass0_src1.csv
[Tue Feb 14 01:31:51 2012] fullrun_ccd1_acisf09171_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Feb 14 01:31:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf09171_pi14-548_cl_pass0_src1.csv
[Tue Feb 14 01:31:51 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf09171_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf09171_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 01:31:51 2012] fullrun_ccd1_acisf09171_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Feb 14 01:31:51 2012] fullrun_ccd1_acisf09171_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Feb 14 01:31:51 2012] Fit fullrun_ccd1_acisf09171_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Feb 14 02:39:59 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 36.325996 pixels away
[Tue Feb 14 02:39:59 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 02:39:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 02:39:59 2012] Assessing source extent using major
[Tue Feb 14 02:39:59 2012] Source does appear to be extended
[Tue Feb 14 02:39:59 2012] Computing asymmetry using major and minor axis, asym = 1.38
[Tue Feb 14 03:08:04 2012] Using EEF radius (= 3.21 ")to estimate initial spatial extent for simple fitting
[Tue Feb 14 03:08:04 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Feb 14 03:08:04 2012] Initial guess for spatial extent in simple fitting = 3.21"
[Tue Feb 14 03:08:04 2012] source mask rpix=6.5, npix_max = 197, mask sum = 196, frac = 0.993
[Tue Feb 14 03:08:04 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 3.21"
[Tue Feb 14 03:27:04 2012] fullrun_ccd1_acisf09171_pi14-548_cl_pass1_src1.ximg exists
[Tue Feb 14 03:27:04 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf09171_pi14-548_cl_pass1_src1.csv
[Tue Feb 14 03:27:04 2012] fullrun_ccd1_acisf09171_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Feb 14 03:27:04 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf09171_pi14-548_cl_pass1_src1.csv
[Tue Feb 14 03:27:04 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf09171_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf09171_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 03:27:04 2012] fullrun_ccd1_acisf09171_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Feb 14 03:27:04 2012] fullrun_ccd1_acisf09171_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Feb 14 03:27:04 2012] Fit fullrun_ccd1_acisf09171_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Feb 14 04:17:18 2012] Spatial fit model total counts = 117.000000, observed total counts = 117.000000
[Tue Feb 14 04:17:18 2012] Offset between fit and detection position for source 1 = 1.870902 pixels
[Tue Feb 14 04:17:18 2012] 116.646500 total counts/ 43.563600 bgd. counts: snr = 11.072709
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.870902 pixels
  Position = (597.3, 258.4) = 17 45 58.94 -29 7 24.8
  Extent = 3.5 (2.7-4.3)", rotation angle = 0
  Source counts = 73.1 +/- 10.8
  Background counts = 43.6
  Rate = 0.003 +/- 0.0004
[Tue Feb 14 04:17:18 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 04:17:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 04:17:18 2012] Assessing source extent using major axis lower bound
[Tue Feb 14 04:17:18 2012] Source does appear to be extended
[Tue Feb 14 04:17:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 14 04:29:27 2012] Writing source region out to fullrun_ccd1_acisf09171_pi14-548_pass1_cl_src1_src.reg
[Tue Feb 14 04:29:27 2012] Extracting stamp from image fullrun_ccd1_acisf09171_pi14-548_cl_sm2.00.img.gz, (439, 101) - (755, 416)
[Tue Feb 14 04:29:27 2012] Writing fullrun_ccd1_acisf09171_pi14-548_pass1_cl_src1.gif
[Tue Feb 14 04:29:29 2012] Size of ../../acisf09171/products/events/fullrun_ccd1_acisf09171_pi14-548_pass1_cl_src1_src.evt.gz[events] = 118 counts
[Tue Feb 14 04:29:29 2012] Mean chipx,y = (551.25, 196.19)
[Tue Feb 14 04:29:29 2012] Mean tdetx,y = (4935.81, 4658.25)
[Tue Feb 14 04:29:29 2012] chipx,y range = (510.00-587.00, 170.00-233.00)
[Tue Feb 14 04:29:29 2012] Size of ../../acisf09171/products/events/fullrun_ccd1_acisf09171_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 568 counts
[Tue Feb 14 04:29:30 2012] Not generating rmf since there are only 73 counts
[Tue Feb 14 04:29:30 2012] arf not found, will run specextract
[Tue Feb 14 04:29:47 2012] ../../acisf09171/products/spectra/fullrun_ccd1_acisf09171_pi14-548_pass1_cl_src1.warf not found
[Tue Feb 14 04:29:47 2012] ../../acisf09171/products/spectra/fullrun_ccd1_acisf09171_pi14-548_pass1_cl_src1.wrmf not found
[Tue Feb 14 04:29:47 2012] Removal of ../../acisf09171/products/spectra/fullrun_ccd1_acisf09171_pi14-548_pass1_cl_src1.soff failed
[Tue Feb 14 04:39:57 2012] Spectrum 1 has only 73 counts, deleting rmf
[Tue Feb 14 04:39:57 2012] 169.311
[Tue Feb 14 05:13:44 2012] Updating aperture counts using extracted products
[Tue Feb 14 05:13:44 2012] Error reading totcts from fullrun_ccd1_acisf09171_pi14-548_pass1_cl_src1_src.pi.gz
[Tue Feb 14 05:13:44 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 14 05:13:44 2012] Using photon index=1.80, rate=0.00264, arf fullrun_ccd1_acisf09171_pi14-548_pass1_cl_src1.arf
[Tue Feb 14 05:13:44 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 14 05:13:44 2012] Updating source flux to 4.6e-14
[Tue Feb 14 05:14:01 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Feb 14 05:14:02 2012] acisf09171/analysis//spectral/fullrun_ccd1_acisf09171_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete