[Thu Sep 22 11:40:09 2011] Detection parameters:
  Position = (1200.7, 787.1) = 11 13 0.18 -26 15 59.3
  Extent = 0.5" x 0.5", rotation angle = 109 degrees
  Source counts = 35.6 +/- 6.1
  Background counts = 1.4
  Rate = 0.0003 +/- 6e-05

[Thu Sep 22 11:40:15 2011] Off-axis axis estimate = 1.35'
[Thu Sep 22 11:42:10 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Thu Sep 22 11:42:10 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Thu Sep 22 11:42:10 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.909
[Thu Sep 22 11:42:10 2011] Giving source the simple spatial ID 12 for pass 0, mean size = 0.39"
[Thu Sep 22 11:42:14 2011] fullrun_ccd3_acisf00915_pi14-548_cl_pass0_src12.ximg exists
[Thu Sep 22 11:42:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00915_pi14-548_cl_pass0_src12.csv
[Thu Sep 22 11:42:14 2011] fullrun_ccd3_acisf00915_pi14-548_cl_pass0_src12_1.ximg exists
[Thu Sep 22 11:42:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00915_pi14-548_cl_pass0_src12.csv
[Thu Sep 22 11:42:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00915_pi14-548_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00915_pi14-548_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 11:42:14 2011] fullrun_ccd3_acisf00915_pi14-548_cl_pass0_tfrozen_src12.ximg exists
[Thu Sep 22 11:42:14 2011] fullrun_ccd3_acisf00915_pi14-548_cl_pass0_tfrozen_src12_1.ximg exists
[Thu Sep 22 11:42:14 2011] Fit fullrun_ccd3_acisf00915_pi14-548_cl_pass0_tfrozen_src12 appears to have run properly
[Thu Sep 22 11:42:43 2011] Spatial fit model total counts = 41.560300, observed total counts = 42.000000
[Thu Sep 22 11:42:43 2011] Offset between fit and detection position for source 9 = 0.708138 pixels
[Thu Sep 22 11:42:43 2011] 42.355740 total counts/ 6.111540 bgd. counts: snr = 14.660986
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.708138 pixels
  Position = (1201.2, 787.6) = 11 13 0.18 -26 15 59.3
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 36.2 +/- 6.5
  Background counts = 6.1
  Rate = 0.0003 +/- 6e-05
[Thu Sep 22 11:42:43 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 11:42:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 11:42:43 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 11:42:43 2011] Source does appear to be extended
[Thu Sep 22 11:42:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 11:43:21 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 22 11:43:21 2011] Initial guess for spatial extent in simple fitting = 0.42"
[Thu Sep 22 11:43:21 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.211
[Thu Sep 22 11:43:21 2011] Giving source the simple spatial ID 12 for pass 1, mean size = 0.42"
[Thu Sep 22 11:43:23 2011] fullrun_ccd3_acisf00915_pi14-548_cl_pass1_src12.ximg exists
[Thu Sep 22 11:43:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00915_pi14-548_cl_pass1_src12.csv
[Thu Sep 22 11:43:23 2011] fullrun_ccd3_acisf00915_pi14-548_cl_pass1_src12_1.ximg exists
[Thu Sep 22 11:43:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00915_pi14-548_cl_pass1_src12.csv
[Thu Sep 22 11:43:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00915_pi14-548_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00915_pi14-548_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 11:43:24 2011] fullrun_ccd3_acisf00915_pi14-548_cl_pass1_tfrozen_src12.ximg exists
[Thu Sep 22 11:43:24 2011] fullrun_ccd3_acisf00915_pi14-548_cl_pass1_tfrozen_src12_1.ximg exists
[Thu Sep 22 11:43:24 2011] Fit fullrun_ccd3_acisf00915_pi14-548_cl_pass1_tfrozen_src12 appears to have run properly
[Thu Sep 22 11:43:51 2011] Spatial fit model total counts = 41.776500, observed total counts = 42.000000
[Thu Sep 22 11:43:51 2011] Offset between fit and detection position for source 9 = 0.002831 pixels
[Thu Sep 22 11:43:51 2011] 42.446420 total counts/ 6.145420 bgd. counts: snr = 14.643430
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.002831 pixels
  Position = (1201.2, 787.6) = 11 13 0.18 -26 15 59.3
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 36.3 +/- 6.5
  Background counts = 6.1
  Rate = 0.0003 +/- 6e-05
[Thu Sep 22 11:43:51 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 11:43:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 11:43:51 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 11:43:51 2011] Source does appear to be extended
[Thu Sep 22 11:43:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 11:51:03 2011] Not overwriting source region fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src9_src.reg
[Thu Sep 22 11:51:03 2011] Extracting stamp from image fullrun_ccd3_acisf00915_pi14-548_cl_sm2.00.img.gz, (1182, 768) - (1221, 807)
[Thu Sep 22 11:51:03 2011] Writing fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src9.gif
[Thu Sep 22 11:51:45 2011] ../../acisf00915/products/events/fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src9_src.evt and ../../acisf00915/products/events/fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src9_bgd.evt exist, delete to re-create
[Thu Sep 22 11:51:45 2011] Size of ../../acisf00915/products/events/fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src9_src.evt.gz[events] = 37 counts
[Thu Sep 22 11:51:45 2011] Mean chipx,y = (850.76, 882.08)
[Thu Sep 22 11:51:45 2011] Mean tdetx,y = (4249.92, 3911.76)
[Thu Sep 22 11:51:45 2011] chipx,y range = (835.00-868.00, 866.00-900.00)
[Thu Sep 22 11:51:45 2011] Size of ../../acisf00915/products/events/fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 15 counts
[Thu Sep 22 11:51:45 2011] ../../acisf00915/products/images/fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src9_src.img and ../../acisf00915/products/images/fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src9_bgd.img exist, delete to re-create
[Thu Sep 22 11:51:45 2011] ../../acisf00915/products/spectra/fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src9_src.pi and ../../acisf00915/products/spectra/fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src9_bgd.pi exist, delete to re-create
[Thu Sep 22 11:51:45 2011] Not generating rmf since there are only 36 counts
[Thu Sep 22 11:51:48 2011] ../../acisf00915/products/lightcurves/fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src9_src.lc and ../../acisf00915/products/lightcurves/fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src9_bgd.lc exist, delete to re-create
[Thu Sep 22 11:54:16 2011] 206.792
[Thu Sep 22 11:55:42 2011] Updating aperture counts using extracted products
[Thu Sep 22 11:55:42 2011] Error reading totcts from fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src9_src.pi.gz
[Thu Sep 22 11:55:42 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 22 11:55:42 2011] Using photon index=1.80, rate=0.000347, arf fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src9.arf
[Thu Sep 22 11:55:42 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 22 11:55:42 2011] Updating source flux to 3.5e-15
[Thu Sep 22 11:57:19 2011] Source 9 has fewer than 100.000000 counts, skipping spectral fitting