[Thu Sep 22 11:40:11 2011] Detection parameters:
  Position = (723.7, 210.2) = 11 13 17.64 -26 20 43.1
  Extent = 1.5" x 1.0", rotation angle = 22 degrees
  Source counts = 16.6 +/- 4.8
  Background counts = 6.4
  Rate = 0.0002 +/- 5e-05

[Thu Sep 22 11:40:15 2011] Off-axis axis estimate = 7.26'
[Thu Sep 22 11:42:10 2011] Using EEF radius (= 2.34 ")to estimate initial spatial extent for simple fitting
[Thu Sep 22 11:42:10 2011] Initial guess for spatial extent in simple fitting = 2.34"
[Thu Sep 22 11:42:10 2011] source mask rpix=4.8, npix_max = 110, mask sum = 110, frac = 0.995
[Thu Sep 22 11:42:10 2011] Giving source the simple spatial ID 26 for pass 0, mean size = 2.34"
[Thu Sep 22 11:42:14 2011] fullrun_ccd3_acisf00915_pi14-548_cl_pass0_src26.ximg exists
[Thu Sep 22 11:42:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00915_pi14-548_cl_pass0_src26.csv
[Thu Sep 22 11:42:14 2011] fullrun_ccd3_acisf00915_pi14-548_cl_pass0_src26_1.ximg exists
[Thu Sep 22 11:42:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00915_pi14-548_cl_pass0_src26.csv
[Thu Sep 22 11:42:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00915_pi14-548_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00915_pi14-548_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 11:42:15 2011] fullrun_ccd3_acisf00915_pi14-548_cl_pass0_tfrozen_src26.ximg exists
[Thu Sep 22 11:42:15 2011] fullrun_ccd3_acisf00915_pi14-548_cl_pass0_tfrozen_src26_1.ximg exists
[Thu Sep 22 11:42:15 2011] Fit fullrun_ccd3_acisf00915_pi14-548_cl_pass0_tfrozen_src26 appears to have run properly
[Thu Sep 22 11:42:43 2011] Spatial fit model total counts = 48.000000, observed total counts = 48.000000
[Thu Sep 22 11:42:43 2011] Offset between fit and detection position for source 41 = 1.131052 pixels
[Thu Sep 22 11:42:43 2011] 48.124600 total counts/ 36.130300 bgd. counts: snr = 1.995442
Spatial fit parameters:
  Offset between fit and detection position for source 41 = 1.131052 pixels
  Position = (724.2, 211.2) = 11 13 17.64 -26 20 42.8
  Extent = 0.9 (0.6-2.0)", rotation angle = 0
  Source counts = 12.0 +/- 6.9
  Background counts = 36.1
  Rate = 0.0001 +/- 7e-05
[Thu Sep 22 11:42:43 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 11:42:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 11:42:43 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 11:42:43 2011] Source does appear to be extended
[Thu Sep 22 11:42:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 11:43:21 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 22 11:43:21 2011] Initial guess for spatial extent in simple fitting = 0.93"
[Thu Sep 22 11:43:21 2011] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.085
[Thu Sep 22 11:43:21 2011] Giving source the simple spatial ID 26 for pass 1, mean size = 0.93"
[Thu Sep 22 11:43:23 2011] fullrun_ccd3_acisf00915_pi14-548_cl_pass1_src26.ximg exists
[Thu Sep 22 11:43:23 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf00915_pi14-548_cl_pass1_src26.csv
[Thu Sep 22 11:43:23 2011] fullrun_ccd3_acisf00915_pi14-548_cl_pass1_src26_1.ximg exists
[Thu Sep 22 11:43:23 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf00915_pi14-548_cl_pass1_src26.csv
[Thu Sep 22 11:43:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00915_pi14-548_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00915_pi14-548_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 11:43:24 2011] fullrun_ccd3_acisf00915_pi14-548_cl_pass1_tfrozen_src26.ximg exists
[Thu Sep 22 11:43:24 2011] fullrun_ccd3_acisf00915_pi14-548_cl_pass1_tfrozen_src26_1.ximg exists
[Thu Sep 22 11:43:24 2011] Fit fullrun_ccd3_acisf00915_pi14-548_cl_pass1_tfrozen_src26 appears to have run properly
[Thu Sep 22 11:43:51 2011] Spatial fit model total counts = 28.652300, observed total counts = 29.000000
[Thu Sep 22 11:43:51 2011] Offset between fit and detection position for source 41 = 0.159842 pixels
[Thu Sep 22 11:43:51 2011] 29.624700 total counts/ 20.938000 bgd. counts: snr = 1.898398
Spatial fit parameters:
  Offset between fit and detection position for source 41 = 0.159842 pixels
  Position = (724.1, 211.1) = 11 13 17.65 -26 20 42.9
  Extent = 0.8 (0.3-1.4)", rotation angle = 0
  Source counts = 8.7 +/- 5.4
  Background counts = 20.9
  Rate = 8e-05 +/- 5e-05
[Thu Sep 22 11:43:51 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 11:43:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 11:43:51 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 11:43:51 2011] Source does appear to be extended
[Thu Sep 22 11:43:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 11:51:03 2011] Not overwriting source region fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src41_src.reg
[Thu Sep 22 11:51:03 2011] Extracting stamp from image fullrun_ccd3_acisf00915_pi14-548_cl_sm2.00.img.gz, (689, 176) - (759, 246)
[Thu Sep 22 11:51:03 2011] Writing fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src41.gif
[Thu Sep 22 11:52:31 2011] ../../acisf00915/products/events/fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src41_src.evt and ../../acisf00915/products/events/fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src41_bgd.evt exist, delete to re-create
[Thu Sep 22 11:52:31 2011] Size of ../../acisf00915/products/events/fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src41_src.evt.gz[events] = 18 counts
[Thu Sep 22 11:52:31 2011] Mean chipx,y = (105.94, 812.67)
[Thu Sep 22 11:52:31 2011] Mean tdetx,y = (4319.33, 3166.94)
[Thu Sep 22 11:52:31 2011] chipx,y range = (86.00-123.00, 794.00-828.00)
[Thu Sep 22 11:52:31 2011] Size of ../../acisf00915/products/events/fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src41_bgd.evt.gz[events] = 47 counts
[Thu Sep 22 11:52:31 2011] ../../acisf00915/products/images/fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src41_src.img and ../../acisf00915/products/images/fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src41_bgd.img exist, delete to re-create
[Thu Sep 22 11:52:31 2011] ../../acisf00915/products/spectra/fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src41_src.pi and ../../acisf00915/products/spectra/fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src41_bgd.pi exist, delete to re-create
[Thu Sep 22 11:52:31 2011] Not generating rmf since there are only 8 counts
[Thu Sep 22 11:52:37 2011] ../../acisf00915/products/lightcurves/fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src41_src.lc and ../../acisf00915/products/lightcurves/fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src41_bgd.lc exist, delete to re-create
[Thu Sep 22 11:54:17 2011] 174.65
[Thu Sep 22 11:55:42 2011] Updating aperture counts using extracted products
[Thu Sep 22 11:55:42 2011] Error reading totcts from fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src41_src.pi.gz
[Thu Sep 22 11:55:43 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 22 11:55:43 2011] Using photon index=1.80, rate=8.3e-05, arf fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src41.arf
[Thu Sep 22 11:55:43 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 22 11:55:43 2011] Updating source flux to 9.7e-16
[Thu Sep 22 11:57:19 2011] Source 41 has fewer than 100.000000 counts, skipping spectral fitting