[Thu Sep 22 11:40:10 2011] Detection parameters:
  Position = (643.0, 240.6) = 11 13 20.59 -26 20 28.1
  Extent = 2.3" x 1.5", rotation angle = 136 degrees
  Source counts = 55.6 +/- 8.4
  Background counts = 15.4
  Rate = 0.0005 +/- 8e-05

[Thu Sep 22 11:40:15 2011] Off-axis axis estimate = 7.59'
[Thu Sep 22 11:42:10 2011] Using EEF radius (= 2.55 ")to estimate initial spatial extent for simple fitting
[Thu Sep 22 11:42:10 2011] Initial guess for spatial extent in simple fitting = 2.55"
[Thu Sep 22 11:42:10 2011] source mask rpix=5.2, npix_max = 129, mask sum = 132, frac = 1.020
[Thu Sep 22 11:42:10 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 2.55"
[Thu Sep 22 11:42:14 2011] fullrun_ccd3_acisf00915_pi14-548_cl_pass0_src6.ximg exists
[Thu Sep 22 11:42:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00915_pi14-548_cl_pass0_src6.csv
[Thu Sep 22 11:42:14 2011] fullrun_ccd3_acisf00915_pi14-548_cl_pass0_src6_1.ximg exists
[Thu Sep 22 11:42:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00915_pi14-548_cl_pass0_src6.csv
[Thu Sep 22 11:42:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00915_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00915_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 11:42:14 2011] fullrun_ccd3_acisf00915_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Thu Sep 22 11:42:14 2011] fullrun_ccd3_acisf00915_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Thu Sep 22 11:42:14 2011] Fit fullrun_ccd3_acisf00915_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Thu Sep 22 11:42:43 2011] Spatial fit model total counts = 76.964200, observed total counts = 77.000000
[Thu Sep 22 11:42:43 2011] Offset between fit and detection position for source 21 = 1.234649 pixels
[Thu Sep 22 11:42:43 2011] 77.236500 total counts/ 24.313000 bgd. counts: snr = 10.733202
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 1.234649 pixels
  Position = (642.3, 241.6) = 11 13 20.64 -26 20 27.8
  Extent = 2.0 (1.6-2.6)", rotation angle = 0
  Source counts = 52.9 +/- 8.8
  Background counts = 24.3
  Rate = 0.0005 +/- 8e-05
[Thu Sep 22 11:42:43 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 11:42:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 11:42:43 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 11:42:43 2011] Source does appear to be extended
[Thu Sep 22 11:42:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 11:43:21 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 22 11:43:21 2011] Initial guess for spatial extent in simple fitting = 2.00"
[Thu Sep 22 11:43:21 2011] source mask rpix=4.1, npix_max = 83, mask sum = 81, frac = 0.972
[Thu Sep 22 11:43:21 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 2.00"
[Thu Sep 22 11:43:22 2011] fullrun_ccd3_acisf00915_pi14-548_cl_pass1_src6.ximg exists
[Thu Sep 22 11:43:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00915_pi14-548_cl_pass1_src6.csv
[Thu Sep 22 11:43:23 2011] fullrun_ccd3_acisf00915_pi14-548_cl_pass1_src6_1.ximg exists
[Thu Sep 22 11:43:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00915_pi14-548_cl_pass1_src6.csv
[Thu Sep 22 11:43:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00915_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00915_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 11:43:23 2011] fullrun_ccd3_acisf00915_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Thu Sep 22 11:43:23 2011] fullrun_ccd3_acisf00915_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Thu Sep 22 11:43:23 2011] Fit fullrun_ccd3_acisf00915_pi14-548_cl_pass1_tfrozen_src6 appears to have run properly
[Thu Sep 22 11:43:51 2011] Spatial fit model total counts = 64.866300, observed total counts = 65.000000
[Thu Sep 22 11:43:51 2011] Offset between fit and detection position for source 21 = 0.282968 pixels
[Thu Sep 22 11:43:51 2011] 64.252880 total counts/ 5.963380 bgd. counts: snr = 23.869542
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.282968 pixels
  Position = (642.5, 241.8) = 11 13 20.63 -26 20 27.7
  Extent = 2.1 (1.6-2.7)", rotation angle = 0
  Source counts = 58.3 +/- 8.0
  Background counts = 6.0
  Rate = 0.0006 +/- 8e-05
[Thu Sep 22 11:43:51 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 11:43:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 11:43:51 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 11:43:51 2011] Source does appear to be extended
[Thu Sep 22 11:43:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 11:51:03 2011] Not overwriting source region fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src21_src.reg
[Thu Sep 22 11:51:03 2011] Extracting stamp from image fullrun_ccd3_acisf00915_pi14-548_cl_sm2.00.img.gz, (546, 145) - (739, 338)
[Thu Sep 22 11:51:03 2011] Writing fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src21.gif
[Thu Sep 22 11:51:22 2011] ../../acisf00915/products/events/fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src21_src.evt and ../../acisf00915/products/events/fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src21_bgd.evt exist, delete to re-create
[Thu Sep 22 11:51:22 2011] Size of ../../acisf00915/products/events/fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src21_src.evt.gz[events] = 79 counts
[Thu Sep 22 11:51:22 2011] Mean chipx,y = (85.44, 726.89)
[Thu Sep 22 11:51:22 2011] Mean tdetx,y = (4405.11, 3146.44)
[Thu Sep 22 11:51:22 2011] chipx,y range = (61.00-115.00, 699.00-753.00)
[Thu Sep 22 11:51:22 2011] Size of ../../acisf00915/products/events/fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src21_bgd.evt.gz[events] = 222 counts
[Thu Sep 22 11:51:22 2011] ../../acisf00915/products/images/fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src21_src.img and ../../acisf00915/products/images/fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src21_bgd.img exist, delete to re-create
[Thu Sep 22 11:51:22 2011] ../../acisf00915/products/spectra/fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src21_src.pi and ../../acisf00915/products/spectra/fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src21_bgd.pi exist, delete to re-create
[Thu Sep 22 11:51:22 2011] Not generating rmf since there are only 58 counts
[Thu Sep 22 11:51:24 2011] ../../acisf00915/products/lightcurves/fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src21_src.lc and ../../acisf00915/products/lightcurves/fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src21_bgd.lc exist, delete to re-create
[Thu Sep 22 11:54:16 2011] 173.636
[Thu Sep 22 11:55:42 2011] Updating aperture counts using extracted products
[Thu Sep 22 11:55:42 2011] Error reading totcts from fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src21_src.pi.gz
[Thu Sep 22 11:55:42 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 22 11:55:42 2011] Using photon index=1.80, rate=0.000557, arf fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src21.arf
[Thu Sep 22 11:55:42 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 22 11:55:42 2011] Updating source flux to 6.6e-15
[Thu Sep 22 11:57:19 2011] Source 21 has fewer than 100.000000 counts, skipping spectral fitting