[Thu Sep 22 11:40:09 2011] Detection parameters:
  Position = (843.0, 811.7) = 11 13 13.26 -26 15 47.1
  Extent = 0.6" x 0.5", rotation angle = 109 degrees
  Source counts = 19.2 +/- 4.6
  Background counts = 1.8
  Rate = 0.0002 +/- 4e-05

[Thu Sep 22 11:40:15 2011] Off-axis axis estimate = 4.25'
[Thu Sep 22 11:42:10 2011] Using EEF radius (= 0.91 ")to estimate initial spatial extent for simple fitting
[Thu Sep 22 11:42:10 2011] Initial guess for spatial extent in simple fitting = 0.91"
[Thu Sep 22 11:42:10 2011] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.909
[Thu Sep 22 11:42:10 2011] Giving source the simple spatial ID 24 for pass 0, mean size = 0.91"
[Thu Sep 22 11:42:14 2011] fullrun_ccd3_acisf00915_pi14-548_cl_pass0_src24.ximg exists
[Thu Sep 22 11:42:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00915_pi14-548_cl_pass0_src24.csv
[Thu Sep 22 11:42:14 2011] fullrun_ccd3_acisf00915_pi14-548_cl_pass0_src24_1.ximg exists
[Thu Sep 22 11:42:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00915_pi14-548_cl_pass0_src24.csv
[Thu Sep 22 11:42:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00915_pi14-548_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00915_pi14-548_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 11:42:15 2011] fullrun_ccd3_acisf00915_pi14-548_cl_pass0_tfrozen_src24.ximg exists
[Thu Sep 22 11:42:15 2011] fullrun_ccd3_acisf00915_pi14-548_cl_pass0_tfrozen_src24_1.ximg exists
[Thu Sep 22 11:42:15 2011] Fit fullrun_ccd3_acisf00915_pi14-548_cl_pass0_tfrozen_src24 appears to have run properly
[Thu Sep 22 11:42:43 2011] Spatial fit model total counts = 26.000000, observed total counts = 26.000000
[Thu Sep 22 11:42:43 2011] Offset between fit and detection position for source 11 = 0.548331 pixels
[Thu Sep 22 11:42:43 2011] 26.155890 total counts/ 7.307890 bgd. counts: snr = 6.972191
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.548331 pixels
  Position = (843.5, 812.0) = 11 13 13.26 -26 15 47.2
  Extent = 0.6 (0.4-0.8)", rotation angle = 0
  Source counts = 18.8 +/- 5.1
  Background counts = 7.3
  Rate = 0.0002 +/- 5e-05
[Thu Sep 22 11:42:43 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 11:42:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 11:42:43 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 11:42:43 2011] Source does appear to be extended
[Thu Sep 22 11:42:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 11:43:21 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 22 11:43:21 2011] Initial guess for spatial extent in simple fitting = 0.57"
[Thu Sep 22 11:43:21 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.090
[Thu Sep 22 11:43:21 2011] Giving source the simple spatial ID 24 for pass 1, mean size = 0.57"
[Thu Sep 22 11:43:23 2011] fullrun_ccd3_acisf00915_pi14-548_cl_pass1_src24.ximg exists
[Thu Sep 22 11:43:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00915_pi14-548_cl_pass1_src24.csv
[Thu Sep 22 11:43:23 2011] fullrun_ccd3_acisf00915_pi14-548_cl_pass1_src24_1.ximg exists
[Thu Sep 22 11:43:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00915_pi14-548_cl_pass1_src24.csv
[Thu Sep 22 11:43:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00915_pi14-548_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00915_pi14-548_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 11:43:24 2011] fullrun_ccd3_acisf00915_pi14-548_cl_pass1_tfrozen_src24.ximg exists
[Thu Sep 22 11:43:24 2011] fullrun_ccd3_acisf00915_pi14-548_cl_pass1_tfrozen_src24_1.ximg exists
[Thu Sep 22 11:43:24 2011] Fit fullrun_ccd3_acisf00915_pi14-548_cl_pass1_tfrozen_src24 appears to have run properly
[Thu Sep 22 11:43:51 2011] Spatial fit model total counts = 26.000000, observed total counts = 26.000000
[Thu Sep 22 11:43:51 2011] Offset between fit and detection position for source 11 = 0.000214 pixels
[Thu Sep 22 11:43:51 2011] 26.155950 total counts/ 7.308350 bgd. counts: snr = 6.971824
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.000214 pixels
  Position = (843.5, 812.0) = 11 13 13.26 -26 15 47.2
  Extent = 0.6 (0.4-0.8)", rotation angle = 0
  Source counts = 18.8 +/- 5.1
  Background counts = 7.3
  Rate = 0.0002 +/- 5e-05
[Thu Sep 22 11:43:51 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 11:43:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 11:43:51 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 11:43:51 2011] Source does appear to be extended
[Thu Sep 22 11:43:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 11:51:03 2011] Not overwriting source region fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src11_src.reg
[Thu Sep 22 11:51:03 2011] Extracting stamp from image fullrun_ccd3_acisf00915_pi14-548_cl_sm2.00.img.gz, (817, 786) - (870, 838)
[Thu Sep 22 11:51:03 2011] Writing fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src11.gif
[Thu Sep 22 11:52:22 2011] ../../acisf00915/products/events/fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src11_src.evt and ../../acisf00915/products/events/fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src11_bgd.evt exist, delete to re-create
[Thu Sep 22 11:52:23 2011] Size of ../../acisf00915/products/events/fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src11_src.evt.gz[events] = 20 counts
[Thu Sep 22 11:52:23 2011] Mean chipx,y = (670.00, 571.95)
[Thu Sep 22 11:52:23 2011] Mean tdetx,y = (4560.05, 3731.00)
[Thu Sep 22 11:52:23 2011] chipx,y range = (652.00-687.00, 555.00-588.00)
[Thu Sep 22 11:52:23 2011] Size of ../../acisf00915/products/events/fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 18 counts
[Thu Sep 22 11:52:23 2011] ../../acisf00915/products/images/fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src11_src.img and ../../acisf00915/products/images/fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src11_bgd.img exist, delete to re-create
[Thu Sep 22 11:52:23 2011] ../../acisf00915/products/spectra/fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src11_src.pi and ../../acisf00915/products/spectra/fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src11_bgd.pi exist, delete to re-create
[Thu Sep 22 11:52:23 2011] Not generating rmf since there are only 18 counts
[Thu Sep 22 11:52:25 2011] ../../acisf00915/products/lightcurves/fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src11_src.lc and ../../acisf00915/products/lightcurves/fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src11_bgd.lc exist, delete to re-create
[Thu Sep 22 11:54:17 2011] 196.13
[Thu Sep 22 11:55:42 2011] Updating aperture counts using extracted products
[Thu Sep 22 11:55:42 2011] Error reading totcts from fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src11_src.pi.gz
[Thu Sep 22 11:55:43 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 22 11:55:43 2011] Using photon index=1.80, rate=0.00018, arf fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src11.arf
[Thu Sep 22 11:55:43 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 22 11:55:43 2011] Updating source flux to 1.9e-15
[Thu Sep 22 11:57:19 2011] Source 11 has fewer than 100.000000 counts, skipping spectral fitting