[Thu Sep 22 11:40:08 2011] Detection parameters:
  Position = (295.1, 907.1) = 11 13 33.30 -26 14 60.0
  Extent = 3.1" x 2.7", rotation angle = 102 degrees
  Source counts = 288.6 +/- 18.4
  Background counts = 50.4
  Rate = 0.003 +/- 0.0002

[Thu Sep 22 11:40:15 2011] Off-axis axis estimate = 8.77'
[Thu Sep 22 11:42:10 2011] Using EEF radius (= 3.40 ")to estimate initial spatial extent for simple fitting
[Thu Sep 22 11:42:10 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep 22 11:42:10 2011] Initial guess for spatial extent in simple fitting = 3.40"
[Thu Sep 22 11:42:10 2011] source mask rpix=6.9, npix_max = 219, mask sum = 210, frac = 0.958
[Thu Sep 22 11:42:10 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 3.40"
[Thu Sep 22 11:42:13 2011] fullrun_ccd3_acisf00915_pi14-548_cl_pass0_src1.ximg exists
[Thu Sep 22 11:42:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00915_pi14-548_cl_pass0_src1.csv
[Thu Sep 22 11:42:13 2011] fullrun_ccd3_acisf00915_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Sep 22 11:42:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00915_pi14-548_cl_pass0_src1.csv
[Thu Sep 22 11:42:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00915_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00915_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 11:42:14 2011] fullrun_ccd3_acisf00915_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Sep 22 11:42:14 2011] fullrun_ccd3_acisf00915_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Sep 22 11:42:14 2011] Fit fullrun_ccd3_acisf00915_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Sep 22 11:42:43 2011] Spatial fit model total counts = 351.123000, observed total counts = 351.000000
[Thu Sep 22 11:42:43 2011] Offset between fit and detection position for source 1 = 1.143007 pixels
[Thu Sep 22 11:42:43 2011] 351.315700 total counts/ 64.609700 bgd. counts: snr = 35.668752
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.143007 pixels
  Position = (295.8, 908.0) = 11 13 33.29 -26 14 59.8
  Extent = 3.0 (2.7-3.3)", rotation angle = 0
  Source counts = 286.7 +/- 18.7
  Background counts = 64.6
  Rate = 0.003 +/- 0.0002
[Thu Sep 22 11:42:43 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 11:42:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 11:42:43 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 11:42:43 2011] Source does appear to be extended
[Thu Sep 22 11:42:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 11:43:21 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 22 11:43:21 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep 22 11:43:21 2011] Initial guess for spatial extent in simple fitting = 2.99"
[Thu Sep 22 11:43:21 2011] source mask rpix=6.1, npix_max = 173, mask sum = 182, frac = 1.051
[Thu Sep 22 11:43:21 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.99"
[Thu Sep 22 11:43:22 2011] fullrun_ccd3_acisf00915_pi14-548_cl_pass1_src1.ximg exists
[Thu Sep 22 11:43:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00915_pi14-548_cl_pass1_src1.csv
[Thu Sep 22 11:43:22 2011] fullrun_ccd3_acisf00915_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Sep 22 11:43:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00915_pi14-548_cl_pass1_src1.csv
[Thu Sep 22 11:43:22 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00915_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00915_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 11:43:23 2011] fullrun_ccd3_acisf00915_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Sep 22 11:43:23 2011] fullrun_ccd3_acisf00915_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Sep 22 11:43:23 2011] Fit fullrun_ccd3_acisf00915_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Sep 22 11:43:51 2011] Spatial fit model total counts = 337.999000, observed total counts = 338.000000
[Thu Sep 22 11:43:51 2011] Offset between fit and detection position for source 1 = 0.007440 pixels
[Thu Sep 22 11:43:51 2011] 338.174800 total counts/ 51.262800 bgd. counts: snr = 40.072603
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.007440 pixels
  Position = (295.8, 908.0) = 11 13 33.29 -26 14 59.8
  Extent = 3.0 (2.7-3.3)", rotation angle = 0
  Source counts = 286.9 +/- 18.4
  Background counts = 51.3
  Rate = 0.003 +/- 0.0002
[Thu Sep 22 11:43:51 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 11:43:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 11:43:51 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 11:43:51 2011] Source does appear to be extended
[Thu Sep 22 11:43:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 11:51:03 2011] Not overwriting source region fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src1_src.reg
[Thu Sep 22 11:51:03 2011] Extracting stamp from image fullrun_ccd3_acisf00915_pi14-548_cl_sm2.00.img.gz, (159, 771) - (433, 1045)
[Thu Sep 22 11:51:03 2011] Writing fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src1.gif
[Thu Sep 22 11:51:07 2011] ../../acisf00915/products/events/fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src1_src.evt and ../../acisf00915/products/events/fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Thu Sep 22 11:51:07 2011] Size of ../../acisf00915/products/events/fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src1_src.evt.gz[events] = 326 counts
[Thu Sep 22 11:51:07 2011] Mean chipx,y = (439.77, 63.13)
[Thu Sep 22 11:51:07 2011] Mean tdetx,y = (5068.87, 3500.77)
[Thu Sep 22 11:51:07 2011] chipx,y range = (409.00-477.00, 30.00-99.00)
[Thu Sep 22 11:51:07 2011] Size of ../../acisf00915/products/events/fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 339 counts
[Thu Sep 22 11:51:07 2011] ../../acisf00915/products/images/fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src1_src.img and ../../acisf00915/products/images/fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Thu Sep 22 11:51:07 2011] ../../acisf00915/products/spectra/fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src1_src.pi and ../../acisf00915/products/spectra/fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Thu Sep 22 11:51:10 2011] ../../acisf00915/products/lightcurves/fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src1_src.lc and ../../acisf00915/products/lightcurves/fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Thu Sep 22 11:54:16 2011] Keeping rmf generated by specextract
[Thu Sep 22 11:54:16 2011] 172.616
[Thu Sep 22 11:55:42 2011] Updating aperture counts using extracted products
[Thu Sep 22 11:55:42 2011] Error reading totcts from fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src1_src.pi.gz
[Thu Sep 22 11:55:42 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 22 11:55:42 2011] Using photon index=1.80, rate=0.00274, arf fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src1.arf
[Thu Sep 22 11:55:42 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 22 11:55:42 2011] Updating source flux to 3.3e-14
[Thu Sep 22 11:57:31 2011] Reading fit data from acisf00915/analysis//spectral/fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src1_pl.csv
[Thu Sep 22 11:57:31 2011] Spectral fit parameter nH value = 1.46251e+21
[Thu Sep 22 11:57:31 2011] Spectral fit parameter PhoIndex value = 2.03701
[Thu Sep 22 11:57:31 2011] Failed to get F(0.3-8.0) from acisf00915/analysis//spectral/fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Sep 22 11:57:31 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 22 11:57:31 2011] Using Nh = 1.5e+21, photon index=2.04, rate=0.00274, arf fullrun_ccd3_acisf00915_pi14-548_pass1_cl_src1.arf
[Thu Sep 22 11:57:31 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 22 11:57:31 2011] Updating source flux to 3e-14