[Thu Sep 22 11:39:59 2011] Detection parameters:
  Position = (582.9, 189.4) = 11 13 1.56 -26 13 41.4
  Extent = 0.5" x 0.5", rotation angle = 88 degrees
  Source counts = 95.2 +/- 9.9
  Background counts = 2.8
  Rate = 0.0009 +/- 9e-05

[Thu Sep 22 11:40:02 2011] Off-axis axis estimate = 2.57'
[Thu Sep 22 11:42:02 2011] Using EEF radius (= 0.50 ")to estimate initial spatial extent for simple fitting
[Thu Sep 22 11:42:02 2011] Initial guess for spatial extent in simple fitting = 0.50"
[Thu Sep 22 11:42:02 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.972
[Thu Sep 22 11:42:02 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 0.50"
[Thu Sep 22 11:42:03 2011] fullrun_ccd1_acisf00915_pi14-548_cl_pass0_src10.ximg exists
[Thu Sep 22 11:42:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00915_pi14-548_cl_pass0_src10.csv
[Thu Sep 22 11:42:03 2011] fullrun_ccd1_acisf00915_pi14-548_cl_pass0_src10_1.ximg exists
[Thu Sep 22 11:42:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00915_pi14-548_cl_pass0_src10.csv
[Thu Sep 22 11:42:03 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf00915_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf00915_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 11:42:03 2011] fullrun_ccd1_acisf00915_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Thu Sep 22 11:42:03 2011] fullrun_ccd1_acisf00915_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Thu Sep 22 11:42:03 2011] Fit fullrun_ccd1_acisf00915_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Thu Sep 22 11:42:33 2011] Spatial fit model total counts = 99.351200, observed total counts = 102.000000
[Thu Sep 22 11:42:33 2011] Offset between fit and detection position for source 9 = 0.695863 pixels
[Thu Sep 22 11:42:33 2011] 99.209990 total counts/ 8.816490 bgd. counts: snr = 30.443133
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.695863 pixels
  Position = (583.4, 189.9) = 11 13 1.56 -26 13 41.4
  Extent = 0.5 (0.5-0.6)", rotation angle = 0
  Source counts = 90.4 +/- 10.0
  Background counts = 8.8
  Rate = 0.0009 +/- 0.0001
[Thu Sep 22 11:42:33 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 11:42:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 11:42:33 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 11:42:33 2011] Source does appear to be extended
[Thu Sep 22 11:42:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 11:43:16 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 22 11:43:16 2011] Initial guess for spatial extent in simple fitting = 0.52"
[Thu Sep 22 11:43:16 2011] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.922
[Thu Sep 22 11:43:16 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 0.52"
[Thu Sep 22 11:43:17 2011] fullrun_ccd1_acisf00915_pi14-548_cl_pass1_src10.ximg exists
[Thu Sep 22 11:43:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00915_pi14-548_cl_pass1_src10.csv
[Thu Sep 22 11:43:17 2011] fullrun_ccd1_acisf00915_pi14-548_cl_pass1_src10_1.ximg exists
[Thu Sep 22 11:43:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00915_pi14-548_cl_pass1_src10.csv
[Thu Sep 22 11:43:17 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf00915_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf00915_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 11:43:18 2011] fullrun_ccd1_acisf00915_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Thu Sep 22 11:43:18 2011] fullrun_ccd1_acisf00915_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Thu Sep 22 11:43:18 2011] Fit fullrun_ccd1_acisf00915_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Thu Sep 22 11:43:41 2011] Spatial fit model total counts = 103.405000, observed total counts = 104.000000
[Thu Sep 22 11:43:41 2011] Offset between fit and detection position for source 9 = 0.008805 pixels
[Thu Sep 22 11:43:41 2011] 103.323400 total counts/ 11.483200 bgd. counts: snr = 27.102001
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.008805 pixels
  Position = (583.4, 189.9) = 11 13 1.56 -26 13 41.4
  Extent = 0.5 (0.5-0.6)", rotation angle = 0
  Source counts = 91.8 +/- 10.2
  Background counts = 11.5
  Rate = 0.0009 +/- 0.0001
[Thu Sep 22 11:43:41 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 11:43:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 11:43:41 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 11:43:41 2011] Source does appear to be extended
[Thu Sep 22 11:43:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 11:46:39 2011] Not overwriting source region fullrun_ccd1_acisf00915_pi14-548_pass1_cl_src9_src.reg
[Thu Sep 22 11:46:39 2011] Extracting stamp from image fullrun_ccd1_acisf00915_pi14-548_cl_sm2.00.img.gz, (560, 166) - (607, 213)
[Thu Sep 22 11:46:39 2011] Writing fullrun_ccd1_acisf00915_pi14-548_pass1_cl_src9.gif
[Thu Sep 22 11:47:15 2011] ../../acisf00915/products/events/fullrun_ccd1_acisf00915_pi14-548_pass1_cl_src9_src.evt and ../../acisf00915/products/events/fullrun_ccd1_acisf00915_pi14-548_pass1_cl_src9_bgd.evt exist, delete to re-create
[Thu Sep 22 11:47:15 2011] Size of ../../acisf00915/products/events/fullrun_ccd1_acisf00915_pi14-548_pass1_cl_src9_src.evt.gz[events] = 94 counts
[Thu Sep 22 11:47:15 2011] Mean chipx,y = (19.01, 694.98)
[Thu Sep 22 11:47:15 2011] Mean tdetx,y = (4437.02, 4126.01)
[Thu Sep 22 11:47:15 2011] chipx,y range = (2.00-33.00, 677.00-714.00)
[Thu Sep 22 11:47:15 2011] Size of ../../acisf00915/products/events/fullrun_ccd1_acisf00915_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 11 counts
[Thu Sep 22 11:47:15 2011] ../../acisf00915/products/images/fullrun_ccd1_acisf00915_pi14-548_pass1_cl_src9_src.img and ../../acisf00915/products/images/fullrun_ccd1_acisf00915_pi14-548_pass1_cl_src9_bgd.img exist, delete to re-create
[Thu Sep 22 11:47:15 2011] ../../acisf00915/products/spectra/fullrun_ccd1_acisf00915_pi14-548_pass1_cl_src9_src.pi and ../../acisf00915/products/spectra/fullrun_ccd1_acisf00915_pi14-548_pass1_cl_src9_bgd.pi exist, delete to re-create
[Thu Sep 22 11:47:15 2011] Not generating rmf since there are only 91 counts
[Thu Sep 22 11:47:18 2011] ../../acisf00915/products/lightcurves/fullrun_ccd1_acisf00915_pi14-548_pass1_cl_src9_src.lc and ../../acisf00915/products/lightcurves/fullrun_ccd1_acisf00915_pi14-548_pass1_cl_src9_bgd.lc exist, delete to re-create
[Thu Sep 22 11:48:39 2011] 170.481
[Thu Sep 22 11:55:40 2011] Updating aperture counts using extracted products
[Thu Sep 22 11:55:40 2011] Error reading totcts from fullrun_ccd1_acisf00915_pi14-548_pass1_cl_src9_src.pi.gz
[Thu Sep 22 11:55:40 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 22 11:55:40 2011] Using photon index=1.80, rate=0.000878, arf fullrun_ccd1_acisf00915_pi14-548_pass1_cl_src9.arf
[Thu Sep 22 11:55:40 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 22 11:55:40 2011] Updating source flux to 1.1e-14
[Thu Sep 22 11:56:18 2011] Source 9 has fewer than 100.000000 counts, skipping spectral fitting