[Thu Sep 22 11:40:01 2011] Detection parameters:
  Position = (394.7, 830.6) = 11 13 8.43 -26 8 25.9
  Extent = 2.4" x 1.5", rotation angle = 64 degrees
  Source counts = 61.0 +/- 8.5
  Background counts = 12.0
  Rate = 0.0006 +/- 8e-05

[Thu Sep 22 11:40:02 2011] Off-axis axis estimate = 7.91'
[Thu Sep 22 11:42:02 2011] Using EEF radius (= 2.77 ")to estimate initial spatial extent for simple fitting
[Thu Sep 22 11:42:02 2011] Initial guess for spatial extent in simple fitting = 2.77"
[Thu Sep 22 11:42:02 2011] source mask rpix=5.6, npix_max = 149, mask sum = 156, frac = 1.041
[Thu Sep 22 11:42:02 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 2.77"
[Thu Sep 22 11:42:03 2011] fullrun_ccd1_acisf00915_pi14-548_cl_pass0_src11.ximg exists
[Thu Sep 22 11:42:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00915_pi14-548_cl_pass0_src11.csv
[Thu Sep 22 11:42:03 2011] fullrun_ccd1_acisf00915_pi14-548_cl_pass0_src11_1.ximg exists
[Thu Sep 22 11:42:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00915_pi14-548_cl_pass0_src11.csv
[Thu Sep 22 11:42:03 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf00915_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf00915_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 11:42:03 2011] fullrun_ccd1_acisf00915_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Thu Sep 22 11:42:03 2011] fullrun_ccd1_acisf00915_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Thu Sep 22 11:42:03 2011] Fit fullrun_ccd1_acisf00915_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Thu Sep 22 11:42:33 2011] Spatial fit model total counts = 86.068100, observed total counts = 87.000000
[Thu Sep 22 11:42:33 2011] Offset between fit and detection position for source 48 = 0.914016 pixels
[Thu Sep 22 11:42:33 2011] 86.107800 total counts/ 24.908000 bgd. counts: snr = 12.262544
Spatial fit parameters:
  Offset between fit and detection position for source 48 = 0.914016 pixels
  Position = (395.5, 830.3) = 11 13 8.42 -26 8 26.3
  Extent = 2.4 (1.9-3.3)", rotation angle = 0
  Source counts = 61.2 +/- 9.3
  Background counts = 24.9
  Rate = 0.0006 +/- 9e-05
[Thu Sep 22 11:42:33 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 11:42:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 11:42:33 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 11:42:33 2011] Source does appear to be extended
[Thu Sep 22 11:42:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 11:43:16 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 22 11:43:16 2011] Initial guess for spatial extent in simple fitting = 2.42"
[Thu Sep 22 11:43:16 2011] source mask rpix=4.9, npix_max = 117, mask sum = 121, frac = 1.032
[Thu Sep 22 11:43:16 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 2.42"
[Thu Sep 22 11:43:17 2011] fullrun_ccd1_acisf00915_pi14-548_cl_pass1_src11.ximg exists
[Thu Sep 22 11:43:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00915_pi14-548_cl_pass1_src11.csv
[Thu Sep 22 11:43:17 2011] fullrun_ccd1_acisf00915_pi14-548_cl_pass1_src11_1.ximg exists
[Thu Sep 22 11:43:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00915_pi14-548_cl_pass1_src11.csv
[Thu Sep 22 11:43:17 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf00915_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf00915_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 11:43:18 2011] fullrun_ccd1_acisf00915_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Thu Sep 22 11:43:18 2011] fullrun_ccd1_acisf00915_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Thu Sep 22 11:43:18 2011] Fit fullrun_ccd1_acisf00915_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Thu Sep 22 11:43:41 2011] Spatial fit model total counts = 80.227300, observed total counts = 80.000000
[Thu Sep 22 11:43:41 2011] Offset between fit and detection position for source 48 = 0.455927 pixels
[Thu Sep 22 11:43:41 2011] 80.598500 total counts/ 19.637000 bgd. counts: snr = 13.756821
Spatial fit parameters:
  Offset between fit and detection position for source 48 = 0.455927 pixels
  Position = (395.1, 830.2) = 11 13 8.43 -26 8 26.4
  Extent = 2.4 (1.8-3.1)", rotation angle = 0
  Source counts = 61.0 +/- 9.0
  Background counts = 19.6
  Rate = 0.0006 +/- 9e-05
[Thu Sep 22 11:43:41 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 11:43:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 11:43:41 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 11:43:41 2011] Source does appear to be extended
[Thu Sep 22 11:43:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 11:46:39 2011] Not overwriting source region fullrun_ccd1_acisf00915_pi14-548_pass1_cl_src48_src.reg
[Thu Sep 22 11:46:39 2011] Extracting stamp from image fullrun_ccd1_acisf00915_pi14-548_cl_sm2.00.img.gz, (287, 723) - (503, 938)
[Thu Sep 22 11:46:39 2011] Writing fullrun_ccd1_acisf00915_pi14-548_pass1_cl_src48.gif
[Thu Sep 22 11:47:18 2011] ../../acisf00915/products/events/fullrun_ccd1_acisf00915_pi14-548_pass1_cl_src48_src.evt and ../../acisf00915/products/events/fullrun_ccd1_acisf00915_pi14-548_pass1_cl_src48_bgd.evt exist, delete to re-create
[Thu Sep 22 11:47:18 2011] Size of ../../acisf00915/products/events/fullrun_ccd1_acisf00915_pi14-548_pass1_cl_src48_src.evt.gz[events] = 84 counts
[Thu Sep 22 11:47:18 2011] Mean chipx,y = (441.35, 175.63)
[Thu Sep 22 11:47:18 2011] Mean tdetx,y = (4956.37, 4548.35)
[Thu Sep 22 11:47:18 2011] chipx,y range = (417.00-470.00, 142.00-207.00)
[Thu Sep 22 11:47:18 2011] Size of ../../acisf00915/products/events/fullrun_ccd1_acisf00915_pi14-548_pass1_cl_src48_bgd.evt.gz[events] = 246 counts
[Thu Sep 22 11:47:18 2011] ../../acisf00915/products/images/fullrun_ccd1_acisf00915_pi14-548_pass1_cl_src48_src.img and ../../acisf00915/products/images/fullrun_ccd1_acisf00915_pi14-548_pass1_cl_src48_bgd.img exist, delete to re-create
[Thu Sep 22 11:47:18 2011] ../../acisf00915/products/spectra/fullrun_ccd1_acisf00915_pi14-548_pass1_cl_src48_src.pi and ../../acisf00915/products/spectra/fullrun_ccd1_acisf00915_pi14-548_pass1_cl_src48_bgd.pi exist, delete to re-create
[Thu Sep 22 11:47:18 2011] Not generating rmf since there are only 60 counts
[Thu Sep 22 11:47:22 2011] ../../acisf00915/products/lightcurves/fullrun_ccd1_acisf00915_pi14-548_pass1_cl_src48_src.lc and ../../acisf00915/products/lightcurves/fullrun_ccd1_acisf00915_pi14-548_pass1_cl_src48_bgd.lc exist, delete to re-create
[Thu Sep 22 11:48:39 2011] 175.15
[Thu Sep 22 11:55:40 2011] Updating aperture counts using extracted products
[Thu Sep 22 11:55:40 2011] Error reading totcts from fullrun_ccd1_acisf00915_pi14-548_pass1_cl_src48_src.pi.gz
[Thu Sep 22 11:55:40 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 22 11:55:40 2011] Using photon index=1.80, rate=0.000583, arf fullrun_ccd1_acisf00915_pi14-548_pass1_cl_src48.arf
[Thu Sep 22 11:55:40 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 22 11:55:40 2011] Updating source flux to 6.8e-15
[Thu Sep 22 11:56:18 2011] Source 48 has fewer than 100.000000 counts, skipping spectral fitting