[Thu Sep 22 11:39:58 2011] Detection parameters:
  Position = (51.8, 569.4) = 11 13 20.97 -26 10 34.3
  Extent = 1.8" x 1.4", rotation angle = 87 degrees
  Source counts = 1536.3 +/- 40.4
  Background counts = 95.7
  Rate = 0.01 +/- 0.0004

[Thu Sep 22 11:40:02 2011] Off-axis axis estimate = 7.86'
[Thu Sep 22 11:42:02 2011] Using EEF radius (= 2.73 ")to estimate initial spatial extent for simple fitting
[Thu Sep 22 11:42:02 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep 22 11:42:02 2011] Initial guess for spatial extent in simple fitting = 2.73"
[Thu Sep 22 11:42:02 2011] source mask rpix=5.6, npix_max = 146, mask sum = 144, frac = 0.981
[Thu Sep 22 11:42:02 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.73"
[Thu Sep 22 11:42:03 2011] fullrun_ccd1_acisf00915_pi14-548_cl_pass0_src1.ximg exists
[Thu Sep 22 11:42:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00915_pi14-548_cl_pass0_src1.csv
[Thu Sep 22 11:42:03 2011] fullrun_ccd1_acisf00915_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Sep 22 11:42:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00915_pi14-548_cl_pass0_src1.csv
[Thu Sep 22 11:42:03 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf00915_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf00915_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 11:42:03 2011] fullrun_ccd1_acisf00915_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Sep 22 11:42:03 2011] fullrun_ccd1_acisf00915_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Sep 22 11:42:03 2011] Fit fullrun_ccd1_acisf00915_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Sep 22 11:42:33 2011] Spatial fit model total counts = 1639.820000, observed total counts = 1649.000000
[Thu Sep 22 11:42:33 2011] Offset between fit and detection position for source 3 = 0.623875 pixels
[Thu Sep 22 11:42:33 2011] 1642.583000 total counts/ 107.323000 bgd. counts: snr = 148.195676
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.623875 pixels
  Position = (52.2, 569.8) = 11 13 20.97 -26 10 34.4
  Extent = 2.5 (2.3-2.5)", rotation angle = 0
  Source counts = 1535.3 +/- 40.5
  Background counts = 107.3
  Rate = 0.01 +/- 0.0004
[Thu Sep 22 11:42:33 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 11:42:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 11:42:33 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 11:42:33 2011] Source does appear to be extended
[Thu Sep 22 11:42:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 11:43:16 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 22 11:43:16 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep 22 11:43:16 2011] Initial guess for spatial extent in simple fitting = 2.45"
[Thu Sep 22 11:43:16 2011] source mask rpix=5.0, npix_max = 120, mask sum = 121, frac = 1.005
[Thu Sep 22 11:43:16 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.45"
[Thu Sep 22 11:43:17 2011] fullrun_ccd1_acisf00915_pi14-548_cl_pass1_src1.ximg exists
[Thu Sep 22 11:43:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00915_pi14-548_cl_pass1_src1.csv
[Thu Sep 22 11:43:17 2011] fullrun_ccd1_acisf00915_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Sep 22 11:43:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00915_pi14-548_cl_pass1_src1.csv
[Thu Sep 22 11:43:17 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf00915_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf00915_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 11:43:17 2011] fullrun_ccd1_acisf00915_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Sep 22 11:43:17 2011] fullrun_ccd1_acisf00915_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Sep 22 11:43:17 2011] Fit fullrun_ccd1_acisf00915_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Sep 22 11:43:41 2011] Spatial fit model total counts = 1632.510000, observed total counts = 1635.000000
[Thu Sep 22 11:43:41 2011] Offset between fit and detection position for source 3 = 0.033048 pixels
[Thu Sep 22 11:43:41 2011] 1634.222000 total counts/ 108.542000 bgd. counts: snr = 146.441626
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.033048 pixels
  Position = (52.3, 569.8) = 11 13 20.97 -26 10 34.4
  Extent = 2.4 (2.3-2.5)", rotation angle = 0
  Source counts = 1525.7 +/- 40.4
  Background counts = 108.5
  Rate = 0.01 +/- 0.0004
[Thu Sep 22 11:43:41 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 11:43:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 11:43:41 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 11:43:41 2011] Source does appear to be extended
[Thu Sep 22 11:43:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 11:46:39 2011] Not overwriting source region fullrun_ccd1_acisf00915_pi14-548_pass1_cl_src3_src.reg
[Thu Sep 22 11:46:39 2011] Extracting stamp from image fullrun_ccd1_acisf00915_pi14-548_cl_sm2.00.img.gz, (0, 459) - (163, 681)
[Thu Sep 22 11:46:39 2011] Writing fullrun_ccd1_acisf00915_pi14-548_pass1_cl_src3.gif
[Thu Sep 22 11:46:44 2011] ../../acisf00915/products/events/fullrun_ccd1_acisf00915_pi14-548_pass1_cl_src3_src.evt and ../../acisf00915/products/events/fullrun_ccd1_acisf00915_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Thu Sep 22 11:46:44 2011] Size of ../../acisf00915/products/events/fullrun_ccd1_acisf00915_pi14-548_pass1_cl_src3_src.evt.gz[events] = 1622 counts
[Thu Sep 22 11:46:44 2011] Mean chipx,y = (31.40, 40.58)
[Thu Sep 22 11:46:44 2011] Mean tdetx,y = (5091.42, 4138.40)
[Thu Sep 22 11:46:44 2011] chipx,y range = (2.00-66.00, 13.00-74.00)
[Thu Sep 22 11:46:44 2011] Size of ../../acisf00915/products/events/fullrun_ccd1_acisf00915_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 123 counts
[Thu Sep 22 11:46:44 2011] ../../acisf00915/products/images/fullrun_ccd1_acisf00915_pi14-548_pass1_cl_src3_src.img and ../../acisf00915/products/images/fullrun_ccd1_acisf00915_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Thu Sep 22 11:46:44 2011] ../../acisf00915/products/spectra/fullrun_ccd1_acisf00915_pi14-548_pass1_cl_src3_src.pi and ../../acisf00915/products/spectra/fullrun_ccd1_acisf00915_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Thu Sep 22 11:46:47 2011] ../../acisf00915/products/lightcurves/fullrun_ccd1_acisf00915_pi14-548_pass1_cl_src3_src.lc and ../../acisf00915/products/lightcurves/fullrun_ccd1_acisf00915_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Thu Sep 22 11:48:38 2011] Keeping rmf generated by specextract
[Thu Sep 22 11:48:38 2011] 180.812
[Thu Sep 22 11:55:40 2011] Updating aperture counts using extracted products
[Thu Sep 22 11:55:40 2011] Error reading totcts from fullrun_ccd1_acisf00915_pi14-548_pass1_cl_src3_src.pi.gz
[Thu Sep 22 11:55:40 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 22 11:55:40 2011] Using photon index=1.80, rate=0.0146, arf fullrun_ccd1_acisf00915_pi14-548_pass1_cl_src3.arf
[Thu Sep 22 11:55:40 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 22 11:55:40 2011] Updating source flux to 1.7e-13
[Thu Sep 22 11:56:51 2011] Reading fit data from acisf00915/analysis//spectral/fullrun_ccd1_acisf00915_pi14-548_pass1_cl_src3_pl.csv
[Thu Sep 22 11:56:51 2011] Spectral fit parameter nH value = 5.75186e+20
[Thu Sep 22 11:56:51 2011] Spectral fit parameter PhoIndex value = 1.7427
[Thu Sep 22 11:56:51 2011] Failed to get F(0.3-8.0) from acisf00915/analysis//spectral/fullrun_ccd1_acisf00915_pi14-548_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Thu Sep 22 11:56:51 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 22 11:56:51 2011] Using Nh = 5.8e+20, photon index=1.74, rate=0.0146, arf fullrun_ccd1_acisf00915_pi14-548_pass1_cl_src3.arf
[Thu Sep 22 11:56:51 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 22 11:56:51 2011] Updating source flux to 1.7e-13