skip = 
machinename xassist.localdomain process id = 14912: smart_fit pl logroot=fullrun_ccd1_acisf09116_pi14-548_pass1_cl_src2_pl flux_elow=0.300000 flux_ehi=8.000000
2 parameters in pl
dchi = 4.605
F(2.0-10.0 keV) = 7.188e-16
Count rates:  0.01648
Entry point parameter values:
Nh = 0.935 ()
Gamma = 9.5 ()
Starting error search...
Getting error on parameter #2 = Nh
smart_error exited normally
A new minimum was found, saved all as fullrun_ccd1_acisf09116_pi14-548_pass1_cl_src2_pl_new.xcm,
restarting error search
Set skip to null
Getting error on parameter #2 = Nh
smart_error exited normally
Nh = 0.877 (0.749 - 0.932)
Getting error on parameter #3 = Gamma
smart_error exited normally
Hard limit reached before req. deltachisq for upper bound
A new minimum was found, saved all as fullrun_ccd1_acisf09116_pi14-548_pass1_cl_src2_pl_new.xcm,
restarting error search
Set skip to null
Getting error on parameter #2 = Nh
smart_error exited normally
Lower steppar contains at least one rel. min.
Nh = 0.951 (0.898 - 1.01)
Getting error on parameter #3 = Gamma
smart_error exited normally
Hard limit reached before req. deltachisq for upper bound
Gamma = 9.98 (9.04 - 10)
Saving fit as fullrun_ccd1_acisf09116_pi14-548_pass1_cl_src2_pl_new.xcm in order to save the revised "delta" values (to improve future error search efficiency)
Final chisq(dof) = 79.581(33)
F(0.5-2.0 keV) = 1.537e-13
F(2.0-10.0 keV) = 4.987e-16
F(0.3-8.0) =  1.858e-13
Count rates:  0.01648