[Sun Oct 23 09:41:30 2011] Detection parameters:
  Position = (522.5, 216.4) = 2 54 34.06 41 31 10.7
  Extent = 3.0" x 2.0", rotation angle = 20 degrees
  Source counts = 2503.5 +/- 53.7
  Background counts = 378.5
  Rate = 0.05 +/- 0.001

[Sun Oct 23 09:41:30 2011] Off-axis axis estimate = 8.69'
[Sun Oct 23 09:43:36 2011] Using EEF radius (= 3.34 ")to estimate initial spatial extent for simple fitting
[Sun Oct 23 09:43:36 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 23 09:43:36 2011] Initial guess for spatial extent in simple fitting = 3.34"
[Sun Oct 23 09:43:36 2011] source mask rpix=6.8, npix_max = 212, mask sum = 210, frac = 0.989
[Sun Oct 23 09:43:36 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 3.34"
[Sun Oct 23 09:43:37 2011] fullrun_ccd3_acisf00908_pi14-548_cl_pass0_src1.ximg exists
[Sun Oct 23 09:43:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00908_pi14-548_cl_pass0_src1.csv
[Sun Oct 23 09:43:37 2011] fullrun_ccd3_acisf00908_pi14-548_cl_pass0_src1_1.ximg exists
[Sun Oct 23 09:43:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00908_pi14-548_cl_pass0_src1.csv
[Sun Oct 23 09:43:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00908_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00908_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 09:43:37 2011] fullrun_ccd3_acisf00908_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun Oct 23 09:43:37 2011] fullrun_ccd3_acisf00908_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Oct 23 09:43:37 2011] Fit fullrun_ccd3_acisf00908_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Oct 23 09:43:52 2011] Spatial fit model total counts = 3272.770000, observed total counts = 3255.000000
[Sun Oct 23 09:43:52 2011] Offset between fit and detection position for source 23 = 0.438279 pixels
[Sun Oct 23 09:43:52 2011] 3274.947000 total counts/ 736.347000 bgd. counts: snr = 93.551987
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.438279 pixels
  Position = (522.5, 216.8) = 2 54 34.08 41 31 10.6
  Extent = 2.5 (2.5-2.6)", rotation angle = 0
  Source counts = 2538.6 +/- 57.2
  Background counts = 736.3
  Rate = 0.05 +/- 0.001
[Sun Oct 23 09:43:52 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 09:43:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 09:43:52 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 09:43:52 2011] Source does appear to be extended
[Sun Oct 23 09:43:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 09:44:14 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 23 09:44:14 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 23 09:44:14 2011] Initial guess for spatial extent in simple fitting = 2.54"
[Sun Oct 23 09:44:14 2011] source mask rpix=5.2, npix_max = 128, mask sum = 113, frac = 0.882
[Sun Oct 23 09:44:14 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.54"
[Sun Oct 23 09:44:14 2011] fullrun_ccd3_acisf00908_pi14-548_cl_pass1_src1.ximg exists
[Sun Oct 23 09:44:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00908_pi14-548_cl_pass1_src1.csv
[Sun Oct 23 09:44:14 2011] fullrun_ccd3_acisf00908_pi14-548_cl_pass1_src1_1.ximg exists
[Sun Oct 23 09:44:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00908_pi14-548_cl_pass1_src1.csv
[Sun Oct 23 09:44:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00908_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00908_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 09:44:15 2011] fullrun_ccd3_acisf00908_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun Oct 23 09:44:15 2011] fullrun_ccd3_acisf00908_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Oct 23 09:44:15 2011] Fit fullrun_ccd3_acisf00908_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Oct 23 09:44:28 2011] Spatial fit model total counts = 3066.720000, observed total counts = 3038.000000
[Sun Oct 23 09:44:28 2011] Offset between fit and detection position for source 23 = 0.170884 pixels
[Sun Oct 23 09:44:28 2011] 3064.251000 total counts/ 670.231000 bgd. counts: snr = 92.473122
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.170884 pixels
  Position = (522.7, 216.9) = 2 54 34.07 41 31 10.7
  Extent = 2.4 (2.3-2.5)", rotation angle = 0
  Source counts = 2394.0 +/- 55.4
  Background counts = 670.2
  Rate = 0.05 +/- 0.001
[Sun Oct 23 09:44:28 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 09:44:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 09:44:28 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 09:44:28 2011] Source does appear to be extended
[Sun Oct 23 09:44:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 09:46:49 2011] Not overwriting source region fullrun_ccd3_acisf00908_pi14-548_pass1_cl_src23_src.reg
[Sun Oct 23 09:46:49 2011] Extracting stamp from image fullrun_ccd3_acisf00908_pi14-548_cl_sm2.00.img.gz, (414, 108) - (631, 325)
[Sun Oct 23 09:46:49 2011] Writing fullrun_ccd3_acisf00908_pi14-548_pass1_cl_src23.gif
[Sun Oct 23 09:46:50 2011] ../../acisf00908/products/events/fullrun_ccd3_acisf00908_pi14-548_pass1_cl_src23_src.evt and ../../acisf00908/products/events/fullrun_ccd3_acisf00908_pi14-548_pass1_cl_src23_bgd.evt exist, delete to re-create
[Sun Oct 23 09:46:50 2011] Size of ../../acisf00908/products/events/fullrun_ccd3_acisf00908_pi14-548_pass1_cl_src23_src.evt.gz[events] = 2897 counts
[Sun Oct 23 09:46:50 2011] Mean chipx,y = (497.74, 44.36)
[Sun Oct 23 09:46:50 2011] Mean tdetx,y = (5087.64, 3558.74)
[Sun Oct 23 09:46:50 2011] chipx,y range = (463.00-530.00, 13.00-79.00)
[Sun Oct 23 09:46:51 2011] Size of ../../acisf00908/products/events/fullrun_ccd3_acisf00908_pi14-548_pass1_cl_src23_bgd.evt.gz[events] = 1857 counts
[Sun Oct 23 09:46:51 2011] ../../acisf00908/products/images/fullrun_ccd3_acisf00908_pi14-548_pass1_cl_src23_src.img and ../../acisf00908/products/images/fullrun_ccd3_acisf00908_pi14-548_pass1_cl_src23_bgd.img exist, delete to re-create
[Sun Oct 23 09:46:51 2011] ../../acisf00908/products/spectra/fullrun_ccd3_acisf00908_pi14-548_pass1_cl_src23_src.pi and ../../acisf00908/products/spectra/fullrun_ccd3_acisf00908_pi14-548_pass1_cl_src23_bgd.pi exist, delete to re-create
[Sun Oct 23 09:46:53 2011] ../../acisf00908/products/lightcurves/fullrun_ccd3_acisf00908_pi14-548_pass1_cl_src23_src.lc and ../../acisf00908/products/lightcurves/fullrun_ccd3_acisf00908_pi14-548_pass1_cl_src23_bgd.lc exist, delete to re-create
[Sun Oct 23 09:47:25 2011] Keeping rmf generated by specextract
[Sun Oct 23 09:47:25 2011] 166.246
[Sun Oct 23 09:47:54 2011] Updating aperture counts using extracted products
[Sun Oct 23 09:47:54 2011] Error reading totcts from fullrun_ccd3_acisf00908_pi14-548_pass1_cl_src23_src.pi.gz
[Sun Oct 23 09:47:54 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 09:47:54 2011] Using photon index=1.80, rate=0.05, arf fullrun_ccd3_acisf00908_pi14-548_pass1_cl_src23.arf
[Sun Oct 23 09:47:54 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 09:47:54 2011] Updating source flux to 6.2e-13
[Sun Oct 23 09:48:46 2011] Reading fit data from acisf00908/analysis//spectral/fullrun_ccd3_acisf00908_pi14-548_pass1_cl_src23_pl.csv
[Sun Oct 23 09:48:46 2011] Spectral fit parameter nH value = 5.41446e+21
[Sun Oct 23 09:48:46 2011] Spectral fit parameter PhoIndex value = 1.75338
[Sun Oct 23 09:48:46 2011] Failed to get F(0.3-8.0) from acisf00908/analysis//spectral/fullrun_ccd3_acisf00908_pi14-548_pass1_cl_src23_pl.csv, possibly due to different flux energy range selected
[Sun Oct 23 09:48:46 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 09:48:46 2011] Using Nh = 5.4e+21, photon index=1.75, rate=0.05, arf fullrun_ccd3_acisf00908_pi14-548_pass1_cl_src23.arf
[Sun Oct 23 09:48:46 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 09:48:46 2011] Updating source flux to 7.4e-13