[Sun Oct 23 09:41:27 2011] Detection parameters:
  Position = (1196.9, 1000.1) = 2 54 47.46 41 40 29.4
  Extent = 0.7" x 0.5", rotation angle = 167 degrees
  Source counts = 16.3 +/- 4.7
  Background counts = 5.7
  Rate = 0.0003 +/- 0.0001

[Sun Oct 23 09:41:27 2011] Off-axis axis estimate = 1.63'
[Sun Oct 23 09:43:33 2011] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Sun Oct 23 09:43:33 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Sun Oct 23 09:43:33 2011] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.581
[Sun Oct 23 09:43:33 2011] Giving source the simple spatial ID 12 for pass 0, mean size = 0.40"
[Sun Oct 23 09:43:34 2011] fullrun_ccd1_acisf00908_pi14-548_cl_pass0_src12.ximg exists
[Sun Oct 23 09:43:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00908_pi14-548_cl_pass0_src12.csv
[Sun Oct 23 09:43:34 2011] fullrun_ccd1_acisf00908_pi14-548_cl_pass0_src12_1.ximg exists
[Sun Oct 23 09:43:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00908_pi14-548_cl_pass0_src12.csv
[Sun Oct 23 09:43:34 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf00908_pi14-548_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf00908_pi14-548_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 09:43:34 2011] fullrun_ccd1_acisf00908_pi14-548_cl_pass0_tfrozen_src12.ximg exists
[Sun Oct 23 09:43:34 2011] fullrun_ccd1_acisf00908_pi14-548_cl_pass0_tfrozen_src12_1.ximg exists
[Sun Oct 23 09:43:34 2011] Fit fullrun_ccd1_acisf00908_pi14-548_cl_pass0_tfrozen_src12 appears to have run properly
[Sun Oct 23 09:43:47 2011] Spatial fit model total counts = 30.921200, observed total counts = 31.000000
[Sun Oct 23 09:43:47 2011] Offset between fit and detection position for source 8 = 0.986441 pixels
[Sun Oct 23 09:43:47 2011] 30.397900 total counts/ 16.060100 bgd. counts: snr = 3.577737
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.986441 pixels
  Position = (1197.5, 1000.9) = 2 54 47.46 41 40 29.6
  Extent = 0.3 (0.2-0.5)", rotation angle = 0
  Source counts = 14.3 +/- 5.5
  Background counts = 16.1
  Rate = 0.0003 +/- 0.0001
[Sun Oct 23 09:43:47 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 09:43:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 09:43:47 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 09:43:47 2011] Source does appear to be extended
[Sun Oct 23 09:43:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 09:44:11 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 23 09:44:11 2011] Initial guess for spatial extent in simple fitting = 0.32"
[Sun Oct 23 09:44:11 2011] source mask rpix=0.7, npix_max = 5, mask sum = 6, frac = 1.116
[Sun Oct 23 09:44:11 2011] Giving source the simple spatial ID 12 for pass 1, mean size = 0.32"
[Sun Oct 23 09:44:12 2011] fullrun_ccd1_acisf00908_pi14-548_cl_pass1_src12.ximg exists
[Sun Oct 23 09:44:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00908_pi14-548_cl_pass1_src12.csv
[Sun Oct 23 09:44:12 2011] fullrun_ccd1_acisf00908_pi14-548_cl_pass1_src12_1.ximg exists
[Sun Oct 23 09:44:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00908_pi14-548_cl_pass1_src12.csv
[Sun Oct 23 09:44:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf00908_pi14-548_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf00908_pi14-548_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 09:44:12 2011] fullrun_ccd1_acisf00908_pi14-548_cl_pass1_tfrozen_src12.ximg exists
[Sun Oct 23 09:44:12 2011] fullrun_ccd1_acisf00908_pi14-548_cl_pass1_tfrozen_src12_1.ximg exists
[Sun Oct 23 09:44:12 2011] Fit fullrun_ccd1_acisf00908_pi14-548_cl_pass1_tfrozen_src12 appears to have run properly
[Sun Oct 23 09:44:23 2011] Spatial fit model total counts = 30.656500, observed total counts = 31.000000
[Sun Oct 23 09:44:23 2011] Offset between fit and detection position for source 8 = 0.003564 pixels
[Sun Oct 23 09:44:23 2011] 30.133300 total counts/ 15.848800 bgd. counts: snr = 3.588119
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.003564 pixels
  Position = (1197.5, 1000.9) = 2 54 47.46 41 40 29.6
  Extent = 0.3 (0.2-0.5)", rotation angle = 0
  Source counts = 14.3 +/- 5.5
  Background counts = 15.8
  Rate = 0.0003 +/- 0.0001
[Sun Oct 23 09:44:23 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 09:44:23 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 09:44:23 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 09:44:23 2011] Source does appear to be extended
[Sun Oct 23 09:44:23 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 09:45:26 2011] Not overwriting source region fullrun_ccd1_acisf00908_pi14-548_pass1_cl_src8_src.reg
[Sun Oct 23 09:45:26 2011] Extracting stamp from image fullrun_ccd1_acisf00908_pi14-548_cl_sm2.00.img.gz, (1183, 986) - (1212, 1016)
[Sun Oct 23 09:45:26 2011] Writing fullrun_ccd1_acisf00908_pi14-548_pass1_cl_src8.gif
[Sun Oct 23 09:45:52 2011] ../../acisf00908/products/events/fullrun_ccd1_acisf00908_pi14-548_pass1_cl_src8_src.evt and ../../acisf00908/products/events/fullrun_ccd1_acisf00908_pi14-548_pass1_cl_src8_bgd.evt exist, delete to re-create
[Sun Oct 23 09:45:52 2011] Size of ../../acisf00908/products/events/fullrun_ccd1_acisf00908_pi14-548_pass1_cl_src8_src.evt.gz[events] = 16 counts
[Sun Oct 23 09:45:52 2011] Mean chipx,y = (124.38, 1006.50)
[Sun Oct 23 09:45:52 2011] Mean tdetx,y = (4125.50, 4231.38)
[Sun Oct 23 09:45:52 2011] chipx,y range = (110.00-141.00, 996.00-1022.00)
[Sun Oct 23 09:45:52 2011] Size of ../../acisf00908/products/events/fullrun_ccd1_acisf00908_pi14-548_pass1_cl_src8_bgd.evt.gz[events] = 16 counts
[Sun Oct 23 09:45:52 2011] ../../acisf00908/products/images/fullrun_ccd1_acisf00908_pi14-548_pass1_cl_src8_src.img and ../../acisf00908/products/images/fullrun_ccd1_acisf00908_pi14-548_pass1_cl_src8_bgd.img exist, delete to re-create
[Sun Oct 23 09:45:52 2011] ../../acisf00908/products/spectra/fullrun_ccd1_acisf00908_pi14-548_pass1_cl_src8_src.pi and ../../acisf00908/products/spectra/fullrun_ccd1_acisf00908_pi14-548_pass1_cl_src8_bgd.pi exist, delete to re-create
[Sun Oct 23 09:45:52 2011] Not generating rmf since there are only 14 counts
[Sun Oct 23 09:45:55 2011] ../../acisf00908/products/lightcurves/fullrun_ccd1_acisf00908_pi14-548_pass1_cl_src8_src.lc and ../../acisf00908/products/lightcurves/fullrun_ccd1_acisf00908_pi14-548_pass1_cl_src8_bgd.lc exist, delete to re-create
[Sun Oct 23 09:46:02 2011] 147.271
[Sun Oct 23 09:47:54 2011] Updating aperture counts using extracted products
[Sun Oct 23 09:47:54 2011] Error reading totcts from fullrun_ccd1_acisf00908_pi14-548_pass1_cl_src8_src.pi.gz
[Sun Oct 23 09:47:54 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 09:47:54 2011] Using photon index=1.80, rate=0.000299, arf fullrun_ccd1_acisf00908_pi14-548_pass1_cl_src8.arf
[Sun Oct 23 09:47:54 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 09:47:54 2011] Updating source flux to 4.2e-15
[Sun Oct 23 09:48:01 2011] Source 8 has fewer than 100.000000 counts, skipping spectral fitting