[Sun Oct 23 09:41:27 2011] Detection parameters:
  Position = (1222.2, 982.3) = 2 54 46.36 41 40 20.7
  Extent = 0.5" x 0.5", rotation angle = 51 degrees
  Source counts = 89.5 +/- 9.9
  Background counts = 8.5
  Rate = 0.002 +/- 0.0002

[Sun Oct 23 09:41:27 2011] Off-axis axis estimate = 1.38'
[Sun Oct 23 09:43:33 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Sun Oct 23 09:43:33 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Sun Oct 23 09:43:33 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.906
[Sun Oct 23 09:43:33 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.39"
[Sun Oct 23 09:43:34 2011] fullrun_ccd1_acisf00908_pi14-548_cl_pass0_src1.ximg exists
[Sun Oct 23 09:43:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00908_pi14-548_cl_pass0_src1.csv
[Sun Oct 23 09:43:34 2011] fullrun_ccd1_acisf00908_pi14-548_cl_pass0_src1_1.ximg exists
[Sun Oct 23 09:43:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00908_pi14-548_cl_pass0_src1.csv
[Sun Oct 23 09:43:34 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf00908_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf00908_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 09:43:34 2011] fullrun_ccd1_acisf00908_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun Oct 23 09:43:34 2011] fullrun_ccd1_acisf00908_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Oct 23 09:43:34 2011] Fit fullrun_ccd1_acisf00908_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Oct 23 09:43:47 2011] Spatial fit model total counts = 111.641000, observed total counts = 118.000000
[Sun Oct 23 09:43:47 2011] Offset between fit and detection position for source 3 = 0.645934 pixels
[Sun Oct 23 09:43:47 2011] 110.233100 total counts/ 24.330100 bgd. counts: snr = 17.415518
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.645934 pixels
  Position = (1222.6, 982.8) = 2 54 46.36 41 40 20.7
  Extent = 0.4 (0.3-0.4)", rotation angle = 0
  Source counts = 85.9 +/- 10.5
  Background counts = 24.3
  Rate = 0.002 +/- 0.0002
[Sun Oct 23 09:43:47 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 09:43:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 09:43:47 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 09:43:47 2011] Source does appear to be extended
[Sun Oct 23 09:43:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 09:44:11 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 23 09:44:11 2011] Initial guess for spatial extent in simple fitting = 0.37"
[Sun Oct 23 09:44:11 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.957
[Sun Oct 23 09:44:11 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.37"
[Sun Oct 23 09:44:12 2011] fullrun_ccd1_acisf00908_pi14-548_cl_pass1_src1.ximg exists
[Sun Oct 23 09:44:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00908_pi14-548_cl_pass1_src1.csv
[Sun Oct 23 09:44:12 2011] fullrun_ccd1_acisf00908_pi14-548_cl_pass1_src1_1.ximg exists
[Sun Oct 23 09:44:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00908_pi14-548_cl_pass1_src1.csv
[Sun Oct 23 09:44:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf00908_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf00908_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 09:44:12 2011] fullrun_ccd1_acisf00908_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun Oct 23 09:44:12 2011] fullrun_ccd1_acisf00908_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Oct 23 09:44:12 2011] Fit fullrun_ccd1_acisf00908_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Oct 23 09:44:23 2011] Spatial fit model total counts = 111.641000, observed total counts = 118.000000
[Sun Oct 23 09:44:23 2011] Offset between fit and detection position for source 3 = 0.000000 pixels
[Sun Oct 23 09:44:23 2011] 110.233100 total counts/ 24.330100 bgd. counts: snr = 17.415518
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.000000 pixels
  Position = (1222.6, 982.8) = 2 54 46.36 41 40 20.7
  Extent = 0.4 (0.3-0.4)", rotation angle = 0
  Source counts = 85.9 +/- 10.5
  Background counts = 24.3
  Rate = 0.002 +/- 0.0002
[Sun Oct 23 09:44:23 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 09:44:23 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 09:44:23 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 09:44:23 2011] Source does appear to be extended
[Sun Oct 23 09:44:23 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 09:45:26 2011] Not overwriting source region fullrun_ccd1_acisf00908_pi14-548_pass1_cl_src3_src.reg
[Sun Oct 23 09:45:26 2011] Extracting stamp from image fullrun_ccd1_acisf00908_pi14-548_cl_sm2.00.img.gz, (1206, 966) - (1239, 1000)
[Sun Oct 23 09:45:26 2011] Writing fullrun_ccd1_acisf00908_pi14-548_pass1_cl_src3.gif
[Sun Oct 23 09:45:27 2011] ../../acisf00908/products/events/fullrun_ccd1_acisf00908_pi14-548_pass1_cl_src3_src.evt and ../../acisf00908/products/events/fullrun_ccd1_acisf00908_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Sun Oct 23 09:45:27 2011] Size of ../../acisf00908/products/events/fullrun_ccd1_acisf00908_pi14-548_pass1_cl_src3_src.evt.gz[events] = 96 counts
[Sun Oct 23 09:45:27 2011] Mean chipx,y = (96.82, 1005.69)
[Sun Oct 23 09:45:27 2011] Mean tdetx,y = (4126.31, 4203.82)
[Sun Oct 23 09:45:27 2011] chipx,y range = (78.00-113.00, 987.00-1023.00)
[Sun Oct 23 09:45:27 2011] Size of ../../acisf00908/products/events/fullrun_ccd1_acisf00908_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 30 counts
[Sun Oct 23 09:45:27 2011] ../../acisf00908/products/images/fullrun_ccd1_acisf00908_pi14-548_pass1_cl_src3_src.img and ../../acisf00908/products/images/fullrun_ccd1_acisf00908_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Sun Oct 23 09:45:27 2011] ../../acisf00908/products/spectra/fullrun_ccd1_acisf00908_pi14-548_pass1_cl_src3_src.pi and ../../acisf00908/products/spectra/fullrun_ccd1_acisf00908_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Sun Oct 23 09:45:27 2011] Not generating rmf since there are only 85 counts
[Sun Oct 23 09:45:29 2011] ../../acisf00908/products/lightcurves/fullrun_ccd1_acisf00908_pi14-548_pass1_cl_src3_src.lc and ../../acisf00908/products/lightcurves/fullrun_ccd1_acisf00908_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Sun Oct 23 09:46:02 2011] 204.809
[Sun Oct 23 09:47:53 2011] Updating aperture counts using extracted products
[Sun Oct 23 09:47:53 2011] Error reading totcts from fullrun_ccd1_acisf00908_pi14-548_pass1_cl_src3_src.pi.gz
[Sun Oct 23 09:47:54 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 09:47:54 2011] Using photon index=1.80, rate=0.0018, arf fullrun_ccd1_acisf00908_pi14-548_pass1_cl_src3.arf
[Sun Oct 23 09:47:54 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 09:47:54 2011] Updating source flux to 1.8e-14
[Sun Oct 23 09:48:01 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Oct 23 09:48:06 2011] acisf00908/analysis//spectral/fullrun_ccd1_acisf00908_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete