[Sun Oct 23 09:41:25 2011] Detection parameters:
  Position = (872.8, 925.0) = 2 54 46.25 41 47 56.6
  Extent = 2.6" x 1.8", rotation angle = 114 degrees
  Source counts = 263.5 +/- 17.3
  Background counts = 37.5
  Rate = 0.006 +/- 0.0004

[Sun Oct 23 09:41:26 2011] Off-axis axis estimate = 8.23'
[Sun Oct 23 09:43:32 2011] Using EEF radius (= 2.99 ")to estimate initial spatial extent for simple fitting
[Sun Oct 23 09:43:32 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 23 09:43:32 2011] Initial guess for spatial extent in simple fitting = 2.99"
[Sun Oct 23 09:43:32 2011] source mask rpix=6.1, npix_max = 173, mask sum = 182, frac = 1.049
[Sun Oct 23 09:43:32 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.99"
[Sun Oct 23 09:43:32 2011] fullrun_ccd0_acisf00908_pi14-548_cl_pass0_src1.ximg exists
[Sun Oct 23 09:43:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00908_pi14-548_cl_pass0_src1.csv
[Sun Oct 23 09:43:32 2011] fullrun_ccd0_acisf00908_pi14-548_cl_pass0_src1_1.ximg exists
[Sun Oct 23 09:43:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00908_pi14-548_cl_pass0_src1.csv
[Sun Oct 23 09:43:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf00908_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf00908_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 09:43:33 2011] fullrun_ccd0_acisf00908_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun Oct 23 09:43:33 2011] fullrun_ccd0_acisf00908_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Oct 23 09:43:33 2011] Fit fullrun_ccd0_acisf00908_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Oct 23 09:43:45 2011] Spatial fit model total counts = 368.363000, observed total counts = 368.000000
[Sun Oct 23 09:43:45 2011] Offset between fit and detection position for source 1 = 0.968606 pixels
[Sun Oct 23 09:43:45 2011] 368.580700 total counts/ 85.294700 bgd. counts: snr = 30.673553
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.968606 pixels
  Position = (872.2, 925.8) = 2 54 46.30 41 47 56.8
  Extent = 2.8 (2.5-3.1)", rotation angle = 0
  Source counts = 283.3 +/- 19.2
  Background counts = 85.3
  Rate = 0.006 +/- 0.0004
[Sun Oct 23 09:43:45 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 09:43:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 09:43:45 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 09:43:45 2011] Source does appear to be extended
[Sun Oct 23 09:43:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 09:44:10 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 23 09:44:10 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 23 09:44:10 2011] Initial guess for spatial extent in simple fitting = 2.77"
[Sun Oct 23 09:44:10 2011] source mask rpix=5.6, npix_max = 150, mask sum = 144, frac = 0.955
[Sun Oct 23 09:44:10 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.77"
[Sun Oct 23 09:44:11 2011] fullrun_ccd0_acisf00908_pi14-548_cl_pass1_src1.ximg exists
[Sun Oct 23 09:44:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00908_pi14-548_cl_pass1_src1.csv
[Sun Oct 23 09:44:11 2011] fullrun_ccd0_acisf00908_pi14-548_cl_pass1_src1_1.ximg exists
[Sun Oct 23 09:44:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00908_pi14-548_cl_pass1_src1.csv
[Sun Oct 23 09:44:11 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf00908_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf00908_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 09:44:11 2011] fullrun_ccd0_acisf00908_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun Oct 23 09:44:11 2011] fullrun_ccd0_acisf00908_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Oct 23 09:44:11 2011] Fit fullrun_ccd0_acisf00908_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Oct 23 09:44:21 2011] Spatial fit model total counts = 355.357000, observed total counts = 355.000000
[Sun Oct 23 09:44:21 2011] Offset between fit and detection position for source 1 = 0.077485 pixels
[Sun Oct 23 09:44:21 2011] 355.356900 total counts/ 76.114900 bgd. counts: snr = 32.007068
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.077485 pixels
  Position = (872.2, 925.8) = 2 54 46.30 41 47 56.8
  Extent = 2.7 (2.5-3.1)", rotation angle = 0
  Source counts = 279.2 +/- 18.9
  Background counts = 76.1
  Rate = 0.006 +/- 0.0004
[Sun Oct 23 09:44:21 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 09:44:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 09:44:21 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 09:44:21 2011] Source does appear to be extended
[Sun Oct 23 09:44:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 09:44:45 2011] Not overwriting source region fullrun_ccd0_acisf00908_pi14-548_pass1_cl_src1_src.reg
[Sun Oct 23 09:44:45 2011] Extracting stamp from image fullrun_ccd0_acisf00908_pi14-548_cl_sm2.00.img.gz, (748, 801) - (997, 1050)
[Sun Oct 23 09:44:45 2011] Writing fullrun_ccd0_acisf00908_pi14-548_pass1_cl_src1.gif
[Sun Oct 23 09:44:46 2011] ../../acisf00908/products/events/fullrun_ccd0_acisf00908_pi14-548_pass1_cl_src1_src.evt and ../../acisf00908/products/events/fullrun_ccd0_acisf00908_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sun Oct 23 09:44:46 2011] Size of ../../acisf00908/products/events/fullrun_ccd0_acisf00908_pi14-548_pass1_cl_src1_src.evt.gz[events] = 340 counts
[Sun Oct 23 09:44:46 2011] Mean chipx,y = (616.01, 191.46)
[Sun Oct 23 09:44:46 2011] Mean tdetx,y = (3252.46, 4515.99)
[Sun Oct 23 09:44:46 2011] chipx,y range = (584.00-650.00, 158.00-219.00)
[Sun Oct 23 09:44:46 2011] Size of ../../acisf00908/products/events/fullrun_ccd0_acisf00908_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 444 counts
[Sun Oct 23 09:44:46 2011] ../../acisf00908/products/images/fullrun_ccd0_acisf00908_pi14-548_pass1_cl_src1_src.img and ../../acisf00908/products/images/fullrun_ccd0_acisf00908_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sun Oct 23 09:44:46 2011] ../../acisf00908/products/spectra/fullrun_ccd0_acisf00908_pi14-548_pass1_cl_src1_src.pi and ../../acisf00908/products/spectra/fullrun_ccd0_acisf00908_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sun Oct 23 09:44:49 2011] ../../acisf00908/products/lightcurves/fullrun_ccd0_acisf00908_pi14-548_pass1_cl_src1_src.lc and ../../acisf00908/products/lightcurves/fullrun_ccd0_acisf00908_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sun Oct 23 09:45:25 2011] Keeping rmf generated by specextract
[Sun Oct 23 09:45:25 2011] 170.77
[Sun Oct 23 09:47:53 2011] Updating aperture counts using extracted products
[Sun Oct 23 09:47:53 2011] Error reading totcts from fullrun_ccd0_acisf00908_pi14-548_pass1_cl_src1_src.pi.gz
[Sun Oct 23 09:47:53 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 09:47:53 2011] Using photon index=1.80, rate=0.00584, arf fullrun_ccd0_acisf00908_pi14-548_pass1_cl_src1.arf
[Sun Oct 23 09:47:53 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 09:47:53 2011] Updating source flux to 7e-14
[Sun Oct 23 09:48:01 2011] Reading fit data from acisf00908/analysis//spectral/fullrun_ccd0_acisf00908_pi14-548_pass1_cl_src1_pl.csv
[Sun Oct 23 09:48:01 2011] Spectral fit parameter nH value = 7.35131e+20
[Sun Oct 23 09:48:01 2011] Spectral fit parameter PhoIndex value = 1.54162
[Sun Oct 23 09:48:01 2011] Failed to get F(0.3-8.0) from acisf00908/analysis//spectral/fullrun_ccd0_acisf00908_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Oct 23 09:48:01 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 09:48:01 2011] Using Nh = 7.4e+20, photon index=1.54, rate=0.00584, arf fullrun_ccd0_acisf00908_pi14-548_pass1_cl_src1.arf
[Sun Oct 23 09:48:01 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 09:48:01 2011] Updating source flux to 7.7e-14