[Wed Sep 28 15:44:30 2011] Detection parameters:
  Position = (743.8, 796.3) = 4 30 15.90 -61 31 17.6
  Extent = 1.0" x 0.8", rotation angle = 66 degrees
  Source counts = 42.2 +/- 6.8
  Background counts = 3.8
  Rate = 0.001 +/- 0.0002

[Wed Sep 28 15:44:31 2011] Off-axis axis estimate = 4.68'
[Wed Sep 28 15:45:37 2011] Using EEF radius (= 1.06 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 15:45:37 2011] Initial guess for spatial extent in simple fitting = 1.06"
[Wed Sep 28 15:45:37 2011] source mask rpix=2.1, npix_max = 28, mask sum = 25, frac = 0.892
[Wed Sep 28 15:45:37 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 1.06"
[Wed Sep 28 15:45:37 2011] fullrun_ccd3_acisf00899_pi14-548_cl_pass0_src4.ximg exists
[Wed Sep 28 15:45:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00899_pi14-548_cl_pass0_src4.csv
[Wed Sep 28 15:45:37 2011] fullrun_ccd3_acisf00899_pi14-548_cl_pass0_src4_1.ximg exists
[Wed Sep 28 15:45:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00899_pi14-548_cl_pass0_src4.csv
[Wed Sep 28 15:45:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00899_pi14-548_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00899_pi14-548_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 15:45:37 2011] fullrun_ccd3_acisf00899_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Wed Sep 28 15:45:37 2011] fullrun_ccd3_acisf00899_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Wed Sep 28 15:45:37 2011] Fit fullrun_ccd3_acisf00899_pi14-548_cl_pass0_tfrozen_src4 appears to have run properly
[Wed Sep 28 15:45:47 2011] Spatial fit model total counts = 45.735900, observed total counts = 46.000000
[Wed Sep 28 15:45:47 2011] Offset between fit and detection position for source 2 = 1.061806 pixels
[Wed Sep 28 15:45:47 2011] 45.329650 total counts/ 5.586550 bgd. counts: snr = 16.814730
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.061806 pixels
  Position = (744.8, 796.8) = 4 30 15.87 -61 31 17.6
  Extent = 0.9 (0.5-1.2)", rotation angle = 0
  Source counts = 39.7 +/- 6.7
  Background counts = 5.6
  Rate = 0.001 +/- 0.0002
[Wed Sep 28 15:45:47 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 15:45:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 15:45:47 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 15:45:47 2011] Source does appear to be extended
[Wed Sep 28 15:45:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 15:46:09 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 28 15:46:09 2011] Initial guess for spatial extent in simple fitting = 0.93"
[Wed Sep 28 15:46:09 2011] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.100
[Wed Sep 28 15:46:09 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 0.93"
[Wed Sep 28 15:46:09 2011] fullrun_ccd3_acisf00899_pi14-548_cl_pass1_src4.ximg exists
[Wed Sep 28 15:46:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00899_pi14-548_cl_pass1_src4.csv
[Wed Sep 28 15:46:09 2011] fullrun_ccd3_acisf00899_pi14-548_cl_pass1_src4_1.ximg exists
[Wed Sep 28 15:46:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00899_pi14-548_cl_pass1_src4.csv
[Wed Sep 28 15:46:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00899_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00899_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 15:46:10 2011] fullrun_ccd3_acisf00899_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Wed Sep 28 15:46:10 2011] fullrun_ccd3_acisf00899_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Wed Sep 28 15:46:10 2011] Fit fullrun_ccd3_acisf00899_pi14-548_cl_pass1_tfrozen_src4 appears to have run properly
[Wed Sep 28 15:46:18 2011] Spatial fit model total counts = 46.999800, observed total counts = 47.000000
[Wed Sep 28 15:46:18 2011] Offset between fit and detection position for source 2 = 0.052384 pixels
[Wed Sep 28 15:46:18 2011] 46.765180 total counts/ 9.495280 bgd. counts: snr = 12.094957
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.052384 pixels
  Position = (744.8, 796.9) = 4 30 15.87 -61 31 17.6
  Extent = 0.9 (0.5-1.1)", rotation angle = 0
  Source counts = 37.3 +/- 6.8
  Background counts = 9.5
  Rate = 0.001 +/- 0.0002
[Wed Sep 28 15:46:18 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 15:46:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 15:46:18 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 15:46:18 2011] Source does appear to be extended
[Wed Sep 28 15:46:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 15:48:18 2011] Not overwriting source region fullrun_ccd3_acisf00899_pi14-548_pass1_cl_src2_src.reg
[Wed Sep 28 15:48:18 2011] Extracting stamp from image fullrun_ccd3_acisf00899_pi14-548_cl_sm2.00.img.gz, (705, 758) - (784, 836)
[Wed Sep 28 15:48:18 2011] Writing fullrun_ccd3_acisf00899_pi14-548_pass1_cl_src2.gif
[Wed Sep 28 15:48:27 2011] ../../acisf00899/products/events/fullrun_ccd3_acisf00899_pi14-548_pass1_cl_src2_src.evt and ../../acisf00899/products/events/fullrun_ccd3_acisf00899_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Wed Sep 28 15:48:27 2011] Size of ../../acisf00899/products/events/fullrun_ccd3_acisf00899_pi14-548_pass1_cl_src2_src.evt.gz[events] = 43 counts
[Wed Sep 28 15:48:27 2011] Mean chipx,y = (556.84, 607.84)
[Wed Sep 28 15:48:27 2011] Mean tdetx,y = (4524.16, 3617.84)
[Wed Sep 28 15:48:27 2011] chipx,y range = (536.00-573.00, 587.00-629.00)
[Wed Sep 28 15:48:27 2011] Size of ../../acisf00899/products/events/fullrun_ccd3_acisf00899_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 34 counts
[Wed Sep 28 15:48:27 2011] ../../acisf00899/products/images/fullrun_ccd3_acisf00899_pi14-548_pass1_cl_src2_src.img and ../../acisf00899/products/images/fullrun_ccd3_acisf00899_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Wed Sep 28 15:48:27 2011] ../../acisf00899/products/spectra/fullrun_ccd3_acisf00899_pi14-548_pass1_cl_src2_src.pi and ../../acisf00899/products/spectra/fullrun_ccd3_acisf00899_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Wed Sep 28 15:48:27 2011] Not generating rmf since there are only 37 counts
[Wed Sep 28 15:48:32 2011] ../../acisf00899/products/lightcurves/fullrun_ccd3_acisf00899_pi14-548_pass1_cl_src2_src.lc and ../../acisf00899/products/lightcurves/fullrun_ccd3_acisf00899_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Wed Sep 28 15:48:47 2011] 192.941
[Wed Sep 28 15:49:24 2011] Updating aperture counts using extracted products
[Wed Sep 28 15:49:24 2011] Error reading totcts from fullrun_ccd3_acisf00899_pi14-548_pass1_cl_src2_src.pi.gz
[Wed Sep 28 15:49:24 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 15:49:24 2011] Using photon index=1.80, rate=0.00125, arf fullrun_ccd3_acisf00899_pi14-548_pass1_cl_src2.arf
[Wed Sep 28 15:49:24 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 15:49:24 2011] Updating source flux to 1.4e-14
[Wed Sep 28 15:49:37 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting