[Wed Sep 28 15:44:29 2011] Detection parameters:
  Position = (299.3, 547.3) = 4 30 3.81 -61 26 31.7
  Extent = 0.5" x 0.5", rotation angle = 59 degrees
  Source counts = 134.5 +/- 11.8
  Background counts = 4.5
  Rate = 0.005 +/- 0.0004

[Wed Sep 28 15:44:30 2011] Off-axis axis estimate = 2.31'
[Wed Sep 28 15:45:36 2011] Using EEF radius (= 0.47 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 15:45:36 2011] Initial guess for spatial extent in simple fitting = 0.47"
[Wed Sep 28 15:45:36 2011] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.074
[Wed Sep 28 15:45:36 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.47"
[Wed Sep 28 15:45:36 2011] fullrun_ccd2_acisf00899_pi14-548_cl_pass0_src1.ximg exists
[Wed Sep 28 15:45:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00899_pi14-548_cl_pass0_src1.csv
[Wed Sep 28 15:45:36 2011] fullrun_ccd2_acisf00899_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Sep 28 15:45:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00899_pi14-548_cl_pass0_src1.csv
[Wed Sep 28 15:45:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf00899_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf00899_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 15:45:36 2011] fullrun_ccd2_acisf00899_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Sep 28 15:45:36 2011] fullrun_ccd2_acisf00899_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Sep 28 15:45:36 2011] Fit fullrun_ccd2_acisf00899_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Sep 28 15:45:46 2011] Spatial fit model total counts = 147.965000, observed total counts = 148.000000
[Wed Sep 28 15:45:46 2011] Offset between fit and detection position for source 7 = 0.696236 pixels
[Wed Sep 28 15:45:46 2011] 147.932700 total counts/ 16.991700 bgd. counts: snr = 31.765613
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.696236 pixels
  Position = (299.8, 547.8) = 4 30 3.81 -61 26 31.7
  Extent = 0.5 (0.5-0.6)", rotation angle = 0
  Source counts = 130.9 +/- 12.2
  Background counts = 17.0
  Rate = 0.004 +/- 0.0004
[Wed Sep 28 15:45:46 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 15:45:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 15:45:46 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 15:45:46 2011] Source does appear to be extended
[Wed Sep 28 15:45:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 15:46:08 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 28 15:46:08 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep 28 15:46:08 2011] Initial guess for spatial extent in simple fitting = 0.50"
[Wed Sep 28 15:46:08 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.969
[Wed Sep 28 15:46:08 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.50"
[Wed Sep 28 15:46:09 2011] fullrun_ccd2_acisf00899_pi14-548_cl_pass1_src1.ximg exists
[Wed Sep 28 15:46:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00899_pi14-548_cl_pass1_src1.csv
[Wed Sep 28 15:46:09 2011] fullrun_ccd2_acisf00899_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Sep 28 15:46:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00899_pi14-548_cl_pass1_src1.csv
[Wed Sep 28 15:46:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf00899_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf00899_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 15:46:09 2011] fullrun_ccd2_acisf00899_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Sep 28 15:46:09 2011] fullrun_ccd2_acisf00899_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Sep 28 15:46:09 2011] Fit fullrun_ccd2_acisf00899_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Sep 28 15:46:17 2011] Warning, spatial fit 1 centroid is now closest to src. 8
[Wed Sep 28 15:46:17 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 15:46:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 15:46:17 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 15:46:17 2011] Source does appear to be extended
[Wed Sep 28 15:46:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 15:47:46 2011] Not overwriting source region fullrun_ccd2_acisf00899_pi14-548_pass1_cl_src7_src.reg
[Wed Sep 28 15:47:46 2011] Extracting stamp from image fullrun_ccd2_acisf00899_pi14-548_cl_sm2.00.img.gz, (277, 525) - (323, 571)
[Wed Sep 28 15:47:46 2011] Writing fullrun_ccd2_acisf00899_pi14-548_pass1_cl_src7.gif
[Wed Sep 28 15:47:47 2011] ../../acisf00899/products/events/fullrun_ccd2_acisf00899_pi14-548_pass1_cl_src7_src.evt and ../../acisf00899/products/events/fullrun_ccd2_acisf00899_pi14-548_pass1_cl_src7_bgd.evt exist, delete to re-create
[Wed Sep 28 15:47:47 2011] Size of ../../acisf00899/products/events/fullrun_ccd2_acisf00899_pi14-548_pass1_cl_src7_src.evt.gz[events] = 134 counts
[Wed Sep 28 15:47:47 2011] Mean chipx,y = (266.47, 888.47)
[Wed Sep 28 15:47:47 2011] Mean tdetx,y = (3949.47, 3819.53)
[Wed Sep 28 15:47:47 2011] chipx,y range = (249.00-284.00, 871.00-907.00)
[Wed Sep 28 15:47:47 2011] Size of ../../acisf00899/products/events/fullrun_ccd2_acisf00899_pi14-548_pass1_cl_src7_bgd.evt.gz[events] = 32 counts
[Wed Sep 28 15:47:47 2011] ../../acisf00899/products/images/fullrun_ccd2_acisf00899_pi14-548_pass1_cl_src7_src.img and ../../acisf00899/products/images/fullrun_ccd2_acisf00899_pi14-548_pass1_cl_src7_bgd.img exist, delete to re-create
[Wed Sep 28 15:47:47 2011] ../../acisf00899/products/spectra/fullrun_ccd2_acisf00899_pi14-548_pass1_cl_src7_src.pi and ../../acisf00899/products/spectra/fullrun_ccd2_acisf00899_pi14-548_pass1_cl_src7_bgd.pi exist, delete to re-create
[Wed Sep 28 15:47:50 2011] ../../acisf00899/products/lightcurves/fullrun_ccd2_acisf00899_pi14-548_pass1_cl_src7_src.lc and ../../acisf00899/products/lightcurves/fullrun_ccd2_acisf00899_pi14-548_pass1_cl_src7_bgd.lc exist, delete to re-create
[Wed Sep 28 15:48:16 2011] Keeping rmf generated by specextract
[Wed Sep 28 15:48:17 2011] 192.658
[Wed Sep 28 15:49:23 2011] Updating aperture counts using extracted products
[Wed Sep 28 15:49:23 2011] Error reading totcts from fullrun_ccd2_acisf00899_pi14-548_pass1_cl_src7_src.pi.gz
[Wed Sep 28 15:49:24 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 15:49:24 2011] Using photon index=1.80, rate=0.0044, arf fullrun_ccd2_acisf00899_pi14-548_pass1_cl_src7.arf
[Wed Sep 28 15:49:24 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 15:49:24 2011] Updating source flux to 4.7e-14
[Wed Sep 28 15:49:36 2011] Reading fit data from acisf00899/analysis//spectral/fullrun_ccd2_acisf00899_pi14-548_pass1_cl_src7_pl.csv
[Wed Sep 28 15:49:36 2011] Spectral fit parameter nH value = 1.07429e+21
[Wed Sep 28 15:49:36 2011] Spectral fit parameter PhoIndex value = 1.89487
[Wed Sep 28 15:49:36 2011] Failed to get F(0.3-8.0) from acisf00899/analysis//spectral/fullrun_ccd2_acisf00899_pi14-548_pass1_cl_src7_pl.csv, possibly due to different flux energy range selected
[Wed Sep 28 15:49:36 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 15:49:36 2011] Using Nh = 1.1e+21, photon index=1.89, rate=0.0044, arf fullrun_ccd2_acisf00899_pi14-548_pass1_cl_src7.arf
[Wed Sep 28 15:49:36 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 15:49:36 2011] Updating source flux to 4.5e-14