[Wed Sep 28 15:44:29 2011] Detection parameters:
  Position = (573.8, 568.8) = 4 29 44.98 -61 26 20.9
  Extent = 0.9" x 0.7", rotation angle = 69 degrees
  Source counts = 42.9 +/- 6.8
  Background counts = 3.1
  Rate = 0.001 +/- 0.0002

[Wed Sep 28 15:44:30 2011] Off-axis axis estimate = 4.57'
[Wed Sep 28 15:45:36 2011] Using EEF radius (= 1.02 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 15:45:36 2011] Initial guess for spatial extent in simple fitting = 1.02"
[Wed Sep 28 15:45:36 2011] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.948
[Wed Sep 28 15:45:36 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 1.02"
[Wed Sep 28 15:45:36 2011] fullrun_ccd2_acisf00899_pi14-548_cl_pass0_src3.ximg exists
[Wed Sep 28 15:45:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00899_pi14-548_cl_pass0_src3.csv
[Wed Sep 28 15:45:36 2011] fullrun_ccd2_acisf00899_pi14-548_cl_pass0_src3_1.ximg exists
[Wed Sep 28 15:45:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00899_pi14-548_cl_pass0_src3.csv
[Wed Sep 28 15:45:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf00899_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf00899_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 15:45:36 2011] fullrun_ccd2_acisf00899_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Wed Sep 28 15:45:36 2011] fullrun_ccd2_acisf00899_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Sep 28 15:45:36 2011] Fit fullrun_ccd2_acisf00899_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Sep 28 15:45:46 2011] Spatial fit model total counts = 48.717000, observed total counts = 49.000000
[Wed Sep 28 15:45:46 2011] Offset between fit and detection position for source 1 = 0.462675 pixels
[Wed Sep 28 15:45:46 2011] 48.949170 total counts/ 9.274070 bgd. counts: snr = 13.028153
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.462675 pixels
  Position = (574.1, 569.1) = 4 29 45.00 -61 26 20.9
  Extent = 0.9 (0.6-1.2)", rotation angle = 0
  Source counts = 39.7 +/- 7.0
  Background counts = 9.3
  Rate = 0.001 +/- 0.0002
[Wed Sep 28 15:45:46 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 15:45:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 15:45:46 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 15:45:46 2011] Source does appear to be extended
[Wed Sep 28 15:45:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 15:46:08 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 28 15:46:08 2011] Initial guess for spatial extent in simple fitting = 0.91"
[Wed Sep 28 15:46:08 2011] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.729
[Wed Sep 28 15:46:08 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.91"
[Wed Sep 28 15:46:09 2011] fullrun_ccd2_acisf00899_pi14-548_cl_pass1_src3.ximg exists
[Wed Sep 28 15:46:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00899_pi14-548_cl_pass1_src3.csv
[Wed Sep 28 15:46:09 2011] fullrun_ccd2_acisf00899_pi14-548_cl_pass1_src3_1.ximg exists
[Wed Sep 28 15:46:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00899_pi14-548_cl_pass1_src3.csv
[Wed Sep 28 15:46:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf00899_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf00899_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 15:46:09 2011] fullrun_ccd2_acisf00899_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Wed Sep 28 15:46:09 2011] fullrun_ccd2_acisf00899_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Sep 28 15:46:09 2011] Fit fullrun_ccd2_acisf00899_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Sep 28 15:46:17 2011] Spatial fit model total counts = 48.703200, observed total counts = 49.000000
[Wed Sep 28 15:46:17 2011] Offset between fit and detection position for source 1 = 0.238347 pixels
[Wed Sep 28 15:46:17 2011] 48.333530 total counts/ 5.574230 bgd. counts: snr = 18.110821
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.238347 pixels
  Position = (574.2, 569.3) = 4 29 44.99 -61 26 20.8
  Extent = 1.0 (0.7-1.1)", rotation angle = 0
  Source counts = 42.8 +/- 7.0
  Background counts = 5.6
  Rate = 0.001 +/- 0.0002
[Wed Sep 28 15:46:17 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 15:46:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 15:46:17 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 15:46:17 2011] Source does appear to be extended
[Wed Sep 28 15:46:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 15:47:46 2011] Not overwriting source region fullrun_ccd2_acisf00899_pi14-548_pass1_cl_src1_src.reg
[Wed Sep 28 15:47:46 2011] Extracting stamp from image fullrun_ccd2_acisf00899_pi14-548_cl_sm2.00.img.gz, (529, 524) - (619, 614)
[Wed Sep 28 15:47:46 2011] Writing fullrun_ccd2_acisf00899_pi14-548_pass1_cl_src1.gif
[Wed Sep 28 15:47:53 2011] ../../acisf00899/products/events/fullrun_ccd2_acisf00899_pi14-548_pass1_cl_src1_src.evt and ../../acisf00899/products/events/fullrun_ccd2_acisf00899_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Wed Sep 28 15:47:53 2011] Size of ../../acisf00899/products/events/fullrun_ccd2_acisf00899_pi14-548_pass1_cl_src1_src.evt.gz[events] = 47 counts
[Wed Sep 28 15:47:53 2011] Mean chipx,y = (474.68, 707.79)
[Wed Sep 28 15:47:53 2011] Mean tdetx,y = (3768.79, 3611.32)
[Wed Sep 28 15:47:53 2011] chipx,y range = (458.00-496.00, 689.00-729.00)
[Wed Sep 28 15:47:53 2011] Size of ../../acisf00899/products/events/fullrun_ccd2_acisf00899_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 46 counts
[Wed Sep 28 15:47:53 2011] ../../acisf00899/products/images/fullrun_ccd2_acisf00899_pi14-548_pass1_cl_src1_src.img and ../../acisf00899/products/images/fullrun_ccd2_acisf00899_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Wed Sep 28 15:47:53 2011] ../../acisf00899/products/spectra/fullrun_ccd2_acisf00899_pi14-548_pass1_cl_src1_src.pi and ../../acisf00899/products/spectra/fullrun_ccd2_acisf00899_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Wed Sep 28 15:47:53 2011] Not generating rmf since there are only 42 counts
[Wed Sep 28 15:47:56 2011] ../../acisf00899/products/lightcurves/fullrun_ccd2_acisf00899_pi14-548_pass1_cl_src1_src.lc and ../../acisf00899/products/lightcurves/fullrun_ccd2_acisf00899_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Wed Sep 28 15:48:17 2011] 190.352
[Wed Sep 28 15:49:23 2011] Updating aperture counts using extracted products
[Wed Sep 28 15:49:23 2011] Error reading totcts from fullrun_ccd2_acisf00899_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Sep 28 15:49:24 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 15:49:24 2011] Using photon index=1.80, rate=0.00144, arf fullrun_ccd2_acisf00899_pi14-548_pass1_cl_src1.arf
[Wed Sep 28 15:49:24 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 15:49:24 2011] Updating source flux to 1.5e-14
[Wed Sep 28 15:49:33 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting