[Fri Oct  7 22:31:13 2011] Detection parameters:
  Position = (369.5, 980.9) = 16 40 20.70 46 51 40.7
  Extent = 1.3" x 1.0", rotation angle = 76 degrees
  Source counts = 40.1 +/- 6.8
  Background counts = 5.9
  Rate = 0.0009 +/- 0.0002

[Fri Oct  7 22:31:15 2011] Off-axis axis estimate = 7.89'
[Fri Oct  7 22:32:48 2011] Using EEF radius (= 2.75 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 22:32:48 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct  7 22:32:48 2011] Initial guess for spatial extent in simple fitting = 2.75"
[Fri Oct  7 22:32:48 2011] source mask rpix=5.6, npix_max = 148, mask sum = 156, frac = 1.050
[Fri Oct  7 22:32:48 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 2.75"
[Fri Oct  7 22:32:48 2011] fullrun_ccd6_acisf00896_pi14-548_cl_pass0_src6.ximg exists
[Fri Oct  7 22:32:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00896_pi14-548_cl_pass0_src6.csv
[Fri Oct  7 22:32:48 2011] fullrun_ccd6_acisf00896_pi14-548_cl_pass0_src6_1.ximg exists
[Fri Oct  7 22:32:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00896_pi14-548_cl_pass0_src6.csv
[Fri Oct  7 22:32:49 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf00896_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf00896_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 22:32:49 2011] fullrun_ccd6_acisf00896_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Fri Oct  7 22:32:49 2011] fullrun_ccd6_acisf00896_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Oct  7 22:32:49 2011] Fit fullrun_ccd6_acisf00896_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Fri Oct  7 22:33:00 2011] Spatial fit model total counts = 136.738000, observed total counts = 131.000000
[Fri Oct  7 22:33:00 2011] Offset between fit and detection position for source 10 = 4.965706 pixels
[Fri Oct  7 22:33:00 2011] 136.957400 total counts/ 15.823400 bgd. counts: snr = 30.452023
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 4.965706 pixels
  Position = (370.0, 985.8) = 16 40 20.71 46 51 42.9
  Extent = 3.7 (2.8-4.7)", rotation angle = 0
  Source counts = 121.1 +/- 11.7
  Background counts = 15.8
  Rate = 0.003 +/- 0.0003
[Fri Oct  7 22:33:00 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 22:33:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 22:33:00 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 22:33:00 2011] Source does appear to be extended
[Fri Oct  7 22:33:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 22:33:24 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 22:33:24 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct  7 22:33:24 2011] Initial guess for spatial extent in simple fitting = 3.73"
[Fri Oct  7 22:33:24 2011] source mask rpix=7.6, npix_max = 261, mask sum = 240, frac = 0.918
[Fri Oct  7 22:33:24 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 3.73"
[Fri Oct  7 22:33:24 2011] fullrun_ccd6_acisf00896_pi14-548_cl_pass1_src6.ximg exists
[Fri Oct  7 22:33:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00896_pi14-548_cl_pass1_src6.csv
[Fri Oct  7 22:33:24 2011] fullrun_ccd6_acisf00896_pi14-548_cl_pass1_src6_1.ximg exists
[Fri Oct  7 22:33:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00896_pi14-548_cl_pass1_src6.csv
[Fri Oct  7 22:33:24 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf00896_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf00896_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 22:33:25 2011] fullrun_ccd6_acisf00896_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Fri Oct  7 22:33:25 2011] fullrun_ccd6_acisf00896_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Fri Oct  7 22:33:25 2011] Fit fullrun_ccd6_acisf00896_pi14-548_cl_pass1_tfrozen_src6 appears to have run properly
[Fri Oct  7 22:33:33 2011] Spatial fit model total counts = 161.118000, observed total counts = 154.000000
[Fri Oct  7 22:33:33 2011] Offset between fit and detection position for source 10 = 0.149656 pixels
[Fri Oct  7 22:33:33 2011] 161.427000 total counts/ 29.867000 bgd. counts: snr = 24.072881
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.149656 pixels
  Position = (369.9, 986.0) = 16 40 20.71 46 51 42.9
  Extent = 3.8 (3.2-4.5)", rotation angle = 0
  Source counts = 131.6 +/- 12.7
  Background counts = 29.9
  Rate = 0.003 +/- 0.0003
[Fri Oct  7 22:33:33 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 22:33:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 22:33:33 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 22:33:33 2011] Source does appear to be extended
[Fri Oct  7 22:33:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 22:35:14 2011] Not overwriting source region fullrun_ccd6_acisf00896_pi14-548_pass1_cl_src10_src.reg
[Fri Oct  7 22:35:14 2011] Extracting stamp from image fullrun_ccd6_acisf00896_pi14-548_cl_sm2.00.img.gz, (198, 814) - (542, 1158)
[Fri Oct  7 22:35:14 2011] Writing fullrun_ccd6_acisf00896_pi14-548_pass1_cl_src10.gif
[Fri Oct  7 22:35:33 2011] ../../acisf00896/products/events/fullrun_ccd6_acisf00896_pi14-548_pass1_cl_src10_src.evt and ../../acisf00896/products/events/fullrun_ccd6_acisf00896_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Fri Oct  7 22:35:33 2011] Size of ../../acisf00896/products/events/fullrun_ccd6_acisf00896_pi14-548_pass1_cl_src10_src.evt.gz[events] = 177 counts
[Fri Oct  7 22:35:33 2011] Mean chipx,y = (386.62, 935.79)
[Fri Oct  7 22:35:33 2011] Mean tdetx,y = (3261.62, 2637.79)
[Fri Oct  7 22:35:33 2011] chipx,y range = (343.00-424.00, 892.00-978.00)
[Fri Oct  7 22:35:33 2011] Size of ../../acisf00896/products/events/fullrun_ccd6_acisf00896_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 365 counts
[Fri Oct  7 22:35:33 2011] ../../acisf00896/products/images/fullrun_ccd6_acisf00896_pi14-548_pass1_cl_src10_src.img and ../../acisf00896/products/images/fullrun_ccd6_acisf00896_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Fri Oct  7 22:35:33 2011] ../../acisf00896/products/spectra/fullrun_ccd6_acisf00896_pi14-548_pass1_cl_src10_src.pi and ../../acisf00896/products/spectra/fullrun_ccd6_acisf00896_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Fri Oct  7 22:35:35 2011] ../../acisf00896/products/lightcurves/fullrun_ccd6_acisf00896_pi14-548_pass1_cl_src10_src.lc and ../../acisf00896/products/lightcurves/fullrun_ccd6_acisf00896_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Fri Oct  7 22:36:10 2011] Keeping rmf generated by specextract
[Fri Oct  7 22:36:10 2011] 165.998
[Fri Oct  7 22:37:22 2011] Updating aperture counts using extracted products
[Fri Oct  7 22:37:22 2011] Error reading totcts from fullrun_ccd6_acisf00896_pi14-548_pass1_cl_src10_src.pi.gz
[Fri Oct  7 22:37:22 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 22:37:22 2011] Using photon index=1.80, rate=0.00311, arf fullrun_ccd6_acisf00896_pi14-548_pass1_cl_src10.arf
[Fri Oct  7 22:37:22 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 22:37:22 2011] Updating source flux to 3.6e-14
[Fri Oct  7 22:37:47 2011] Reading fit data from acisf00896/analysis//spectral/fullrun_ccd6_acisf00896_pi14-548_pass1_cl_src10_pl.csv
[Fri Oct  7 22:37:47 2011] Spectral fit parameter nH value = 4.83314e+13
[Fri Oct  7 22:37:47 2011] Spectral fit parameter PhoIndex value = 2.05838
[Fri Oct  7 22:37:47 2011] Failed to get F(0.3-8.0) from acisf00896/analysis//spectral/fullrun_ccd6_acisf00896_pi14-548_pass1_cl_src10_pl.csv, possibly due to different flux energy range selected
[Fri Oct  7 22:37:47 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 22:37:47 2011] Using Nh = 4.8e+13, photon index=2.06, rate=0.00311, arf fullrun_ccd6_acisf00896_pi14-548_pass1_cl_src10.arf
[Fri Oct  7 22:37:47 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 22:37:47 2011] Updating source flux to 3.4e-14