[Fri Oct 28 02:10:26 2011] Detection parameters:
  Position = (335.9, 974.3) = 11 5 29.36 -58 54 5.7
  Extent = 0.9" x 0.5", rotation angle = 3 degrees
  Source counts = 47.1 +/- 7.2
  Background counts = 4.9
  Rate = 0.0004 +/- 6e-05

[Fri Oct 28 02:10:31 2011] Off-axis axis estimate = 4.51'
[Fri Oct 28 02:12:55 2011] Using EEF radius (= 1.00 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 02:12:55 2011] Initial guess for spatial extent in simple fitting = 1.00"
[Fri Oct 28 02:12:55 2011] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.980
[Fri Oct 28 02:12:55 2011] Giving source the simple spatial ID 20 for pass 0, mean size = 1.00"
[Fri Oct 28 02:12:57 2011] fullrun_ccd3_acisf08941_pi14-548_cl_pass0_src20.ximg exists
[Fri Oct 28 02:12:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08941_pi14-548_cl_pass0_src20.csv
[Fri Oct 28 02:12:57 2011] fullrun_ccd3_acisf08941_pi14-548_cl_pass0_src20_1.ximg exists
[Fri Oct 28 02:12:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08941_pi14-548_cl_pass0_src20.csv
[Fri Oct 28 02:12:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08941_pi14-548_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08941_pi14-548_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 02:12:58 2011] fullrun_ccd3_acisf08941_pi14-548_cl_pass0_tfrozen_src20.ximg exists
[Fri Oct 28 02:12:58 2011] fullrun_ccd3_acisf08941_pi14-548_cl_pass0_tfrozen_src20_1.ximg exists
[Fri Oct 28 02:12:58 2011] Fit fullrun_ccd3_acisf08941_pi14-548_cl_pass0_tfrozen_src20 appears to have run properly
[Fri Oct 28 02:13:54 2011] Spatial fit model total counts = 54.210200, observed total counts = 55.000000
[Fri Oct 28 02:13:54 2011] Offset between fit and detection position for source 27 = 0.593674 pixels
[Fri Oct 28 02:13:54 2011] 55.258530 total counts/ 8.988530 bgd. counts: snr = 15.433171
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.593674 pixels
  Position = (336.4, 974.7) = 11 5 29.37 -58 54 5.7
  Extent = 0.8 (0.7-1.0)", rotation angle = 0
  Source counts = 46.3 +/- 7.4
  Background counts = 9.0
  Rate = 0.0004 +/- 6e-05
[Fri Oct 28 02:13:54 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 02:13:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 02:13:54 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 02:13:54 2011] Source does appear to be extended
[Fri Oct 28 02:13:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 02:15:01 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 28 02:15:01 2011] Initial guess for spatial extent in simple fitting = 0.84"
[Fri Oct 28 02:15:01 2011] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.284
[Fri Oct 28 02:15:01 2011] Giving source the simple spatial ID 20 for pass 1, mean size = 0.84"
[Fri Oct 28 02:15:05 2011] fullrun_ccd3_acisf08941_pi14-548_cl_pass1_src20.ximg exists
[Fri Oct 28 02:15:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08941_pi14-548_cl_pass1_src20.csv
[Fri Oct 28 02:15:05 2011] fullrun_ccd3_acisf08941_pi14-548_cl_pass1_src20_1.ximg exists
[Fri Oct 28 02:15:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08941_pi14-548_cl_pass1_src20.csv
[Fri Oct 28 02:15:05 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08941_pi14-548_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08941_pi14-548_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 02:15:06 2011] fullrun_ccd3_acisf08941_pi14-548_cl_pass1_tfrozen_src20.ximg exists
[Fri Oct 28 02:15:06 2011] fullrun_ccd3_acisf08941_pi14-548_cl_pass1_tfrozen_src20_1.ximg exists
[Fri Oct 28 02:15:06 2011] Fit fullrun_ccd3_acisf08941_pi14-548_cl_pass1_tfrozen_src20 appears to have run properly
[Fri Oct 28 02:16:00 2011] Spatial fit model total counts = 54.158800, observed total counts = 55.000000
[Fri Oct 28 02:16:00 2011] Offset between fit and detection position for source 27 = 0.042288 pixels
[Fri Oct 28 02:16:00 2011] 55.154620 total counts/ 9.238120 bgd. counts: snr = 15.106956
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.042288 pixels
  Position = (336.4, 974.7) = 11 5 29.37 -58 54 5.7
  Extent = 0.8 (0.7-1.0)", rotation angle = 0
  Source counts = 45.9 +/- 7.4
  Background counts = 9.2
  Rate = 0.0004 +/- 6e-05
[Fri Oct 28 02:16:00 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 02:16:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 02:16:00 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 02:16:00 2011] Source does appear to be extended
[Fri Oct 28 02:16:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 02:28:08 2011] Not overwriting source region fullrun_ccd3_acisf08941_pi14-548_pass1_cl_src27_src.reg
[Fri Oct 28 02:28:08 2011] Extracting stamp from image fullrun_ccd3_acisf08941_pi14-548_cl_sm2.00.img.gz, (299, 937) - (374, 1012)
[Fri Oct 28 02:28:08 2011] Writing fullrun_ccd3_acisf08941_pi14-548_pass1_cl_src27.gif
[Fri Oct 28 02:29:13 2011] ../../acisf08941/products/events/fullrun_ccd3_acisf08941_pi14-548_pass1_cl_src27_src.evt and ../../acisf08941/products/events/fullrun_ccd3_acisf08941_pi14-548_pass1_cl_src27_bgd.evt exist, delete to re-create
[Fri Oct 28 02:29:14 2011] Size of ../../acisf08941/products/events/fullrun_ccd3_acisf08941_pi14-548_pass1_cl_src27_src.evt.gz[events] = 51 counts
[Fri Oct 28 02:29:14 2011] Mean chipx,y = (980.73, 472.63)
[Fri Oct 28 02:29:14 2011] Mean tdetx,y = (4659.37, 4041.73)
[Fri Oct 28 02:29:14 2011] chipx,y range = (959.00-1002.00, 454.00-490.00)
[Fri Oct 28 02:29:14 2011] Size of ../../acisf08941/products/events/fullrun_ccd3_acisf08941_pi14-548_pass1_cl_src27_bgd.evt.gz[events] = 80 counts
[Fri Oct 28 02:29:14 2011] ../../acisf08941/products/images/fullrun_ccd3_acisf08941_pi14-548_pass1_cl_src27_src.img and ../../acisf08941/products/images/fullrun_ccd3_acisf08941_pi14-548_pass1_cl_src27_bgd.img exist, delete to re-create
[Fri Oct 28 02:29:14 2011] ../../acisf08941/products/spectra/fullrun_ccd3_acisf08941_pi14-548_pass1_cl_src27_src.pi and ../../acisf08941/products/spectra/fullrun_ccd3_acisf08941_pi14-548_pass1_cl_src27_bgd.pi exist, delete to re-create
[Fri Oct 28 02:29:14 2011] Not generating rmf since there are only 45 counts
[Fri Oct 28 02:29:17 2011] ../../acisf08941/products/lightcurves/fullrun_ccd3_acisf08941_pi14-548_pass1_cl_src27_src.lc and ../../acisf08941/products/lightcurves/fullrun_ccd3_acisf08941_pi14-548_pass1_cl_src27_bgd.lc exist, delete to re-create
[Fri Oct 28 02:32:49 2011] 193.013
[Fri Oct 28 02:33:32 2011] Updating aperture counts using extracted products
[Fri Oct 28 02:33:32 2011] Error reading totcts from fullrun_ccd3_acisf08941_pi14-548_pass1_cl_src27_src.pi.gz
[Fri Oct 28 02:33:33 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 02:33:33 2011] Using photon index=1.80, rate=0.000353, arf fullrun_ccd3_acisf08941_pi14-548_pass1_cl_src27.arf
[Fri Oct 28 02:33:33 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 02:33:33 2011] Updating source flux to 5.1e-15
[Fri Oct 28 02:35:01 2011] Source 27 has fewer than 100.000000 counts, skipping spectral fitting