[Fri Oct 28 02:10:24 2011] Detection parameters:
  Position = (728.2, 82.2) = 11 4 23.10 -58 54 45.2
  Extent = 1.6" x 1.0", rotation angle = 45 degrees
  Source counts = 344.6 +/- 19.7
  Background counts = 44.4
  Rate = 0.003 +/- 0.0002

[Fri Oct 28 02:10:24 2011] Off-axis axis estimate = 6.87'
[Fri Oct 28 02:12:45 2011] Using EEF radius (= 2.11 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 02:12:45 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 28 02:12:45 2011] Initial guess for spatial extent in simple fitting = 2.11"
[Fri Oct 28 02:12:45 2011] source mask rpix=4.3, npix_max = 91, mask sum = 100, frac = 1.094
[Fri Oct 28 02:12:45 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 2.11"
[Fri Oct 28 02:12:47 2011] fullrun_ccd2_acisf08941_pi14-548_cl_pass0_src2.ximg exists
[Fri Oct 28 02:12:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08941_pi14-548_cl_pass0_src2.csv
[Fri Oct 28 02:12:47 2011] fullrun_ccd2_acisf08941_pi14-548_cl_pass0_src2_1.ximg exists
[Fri Oct 28 02:12:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08941_pi14-548_cl_pass0_src2.csv
[Fri Oct 28 02:12:47 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf08941_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf08941_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 02:12:48 2011] fullrun_ccd2_acisf08941_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Fri Oct 28 02:12:48 2011] fullrun_ccd2_acisf08941_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Oct 28 02:12:48 2011] Fit fullrun_ccd2_acisf08941_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Oct 28 02:13:44 2011] Spatial fit model total counts = 351.681000, observed total counts = 384.000000
[Fri Oct 28 02:13:44 2011] Offset between fit and detection position for source 123 = 0.765525 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 123 = 0.765525 pixels
  Position = (727.6, 81.8) = 11 4 23.17 -58 54 45.7
  Extent = 2.1 (1.9-2.1)", rotation angle = 0
  Source counts = 363.2 +/- 19.1
  Background counts = 0.0
  Rate = 0.003 +/- 0.0001
[Fri Oct 28 02:13:45 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 02:13:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 02:13:45 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 02:13:45 2011] Source does appear to be extended
[Fri Oct 28 02:13:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 02:14:52 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 28 02:14:52 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 28 02:14:52 2011] Initial guess for spatial extent in simple fitting = 2.05"
[Fri Oct 28 02:14:52 2011] source mask rpix=4.2, npix_max = 87, mask sum = 90, frac = 1.033
[Fri Oct 28 02:14:52 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 2.05"
[Fri Oct 28 02:14:55 2011] fullrun_ccd2_acisf08941_pi14-548_cl_pass1_src2.ximg exists
[Fri Oct 28 02:14:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08941_pi14-548_cl_pass1_src2.csv
[Fri Oct 28 02:14:55 2011] fullrun_ccd2_acisf08941_pi14-548_cl_pass1_src2_1.ximg exists
[Fri Oct 28 02:14:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08941_pi14-548_cl_pass1_src2.csv
[Fri Oct 28 02:14:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf08941_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf08941_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 02:14:59 2011] fullrun_ccd2_acisf08941_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Fri Oct 28 02:14:59 2011] fullrun_ccd2_acisf08941_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Oct 28 02:14:59 2011] Fit fullrun_ccd2_acisf08941_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Oct 28 02:15:51 2011] Spatial fit model total counts = 345.475000, observed total counts = 381.000000
[Fri Oct 28 02:15:51 2011] Offset between fit and detection position for source 123 = 0.250232 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 123 = 0.250232 pixels
  Position = (727.4, 81.7) = 11 4 23.18 -58 54 45.8
  Extent = 2.0 (1.9-2.1)", rotation angle = 0
  Source counts = 358.7 +/- 18.9
  Background counts = 0.0
  Rate = 0.003 +/- 0.0001
[Fri Oct 28 02:15:51 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 02:15:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 02:15:51 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 02:15:51 2011] Source does appear to be extended
[Fri Oct 28 02:15:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 02:24:07 2011] Not overwriting source region fullrun_ccd2_acisf08941_pi14-548_pass1_cl_src123_src.reg
[Fri Oct 28 02:24:07 2011] Extracting stamp from image fullrun_ccd2_acisf08941_pi14-548_cl_sm2.00.img.gz, (635, 0) - (820, 174)
[Fri Oct 28 02:24:07 2011] Writing fullrun_ccd2_acisf08941_pi14-548_pass1_cl_src123.gif
[Fri Oct 28 02:24:15 2011] ../../acisf08941/products/events/fullrun_ccd2_acisf08941_pi14-548_pass1_cl_src123_src.evt and ../../acisf08941/products/events/fullrun_ccd2_acisf08941_pi14-548_pass1_cl_src123_bgd.evt exist, delete to re-create
[Fri Oct 28 02:24:15 2011] Size of ../../acisf08941/products/events/fullrun_ccd2_acisf08941_pi14-548_pass1_cl_src123_src.evt.gz[events] = 398 counts
[Fri Oct 28 02:24:15 2011] Mean chipx,y = (913.23, 1007.88)
[Fri Oct 28 02:24:15 2011] Mean tdetx,y = (4068.88, 3172.77)
[Fri Oct 28 02:24:15 2011] chipx,y range = (893.00-940.00, 985.00-1022.00)
[Fri Oct 28 02:24:15 2011] Size of ../../acisf08941/products/events/fullrun_ccd2_acisf08941_pi14-548_pass1_cl_src123_bgd.evt.gz[events] = 239 counts
[Fri Oct 28 02:24:15 2011] ../../acisf08941/products/images/fullrun_ccd2_acisf08941_pi14-548_pass1_cl_src123_src.img and ../../acisf08941/products/images/fullrun_ccd2_acisf08941_pi14-548_pass1_cl_src123_bgd.img exist, delete to re-create
[Fri Oct 28 02:24:15 2011] ../../acisf08941/products/spectra/fullrun_ccd2_acisf08941_pi14-548_pass1_cl_src123_src.pi and ../../acisf08941/products/spectra/fullrun_ccd2_acisf08941_pi14-548_pass1_cl_src123_bgd.pi exist, delete to re-create
[Fri Oct 28 02:24:17 2011] ../../acisf08941/products/lightcurves/fullrun_ccd2_acisf08941_pi14-548_pass1_cl_src123_src.lc and ../../acisf08941/products/lightcurves/fullrun_ccd2_acisf08941_pi14-548_pass1_cl_src123_bgd.lc exist, delete to re-create
[Fri Oct 28 02:28:05 2011] Keeping rmf generated by specextract
[Fri Oct 28 02:28:05 2011] 98.6636
[Fri Oct 28 02:33:30 2011] Updating aperture counts using extracted products
[Fri Oct 28 02:33:30 2011] Error reading totcts from fullrun_ccd2_acisf08941_pi14-548_pass1_cl_src123_src.pi.gz
[Fri Oct 28 02:33:31 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 02:33:31 2011] Using photon index=1.80, rate=0.00276, arf fullrun_ccd2_acisf08941_pi14-548_pass1_cl_src123.arf
[Fri Oct 28 02:33:31 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 02:33:31 2011] Updating source flux to 7.7e-14
[Fri Oct 28 02:35:01 2011] Reading fit data from acisf08941/analysis//spectral/fullrun_ccd2_acisf08941_pi14-548_pass1_cl_src123_pl.csv
[Fri Oct 28 02:35:01 2011] Spectral fit parameter nH value = 1.3412e+22
[Fri Oct 28 02:35:01 2011] Spectral fit parameter PhoIndex value = 2.23481
[Fri Oct 28 02:35:01 2011] Failed to get F(0.3-8.0) from acisf08941/analysis//spectral/fullrun_ccd2_acisf08941_pi14-548_pass1_cl_src123_pl.csv, possibly due to different flux energy range selected
[Fri Oct 28 02:35:01 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 02:35:01 2011] Using Nh = 1.3e+22, photon index=2.23, rate=0.00276, arf fullrun_ccd2_acisf08941_pi14-548_pass1_cl_src123.arf
[Fri Oct 28 02:35:01 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 02:35:01 2011] Updating source flux to 7.3e-14