[Fri Oct  7 03:08:21 2011] Detection parameters:
  Position = (293.9, 995.6) = 5 35 17.95 -5 29 34.7
  Extent = 3.2" x 2.3", rotation angle = 28 degrees
  Source counts = 199.2 +/- 15.8
  Background counts = 50.8
  Rate = 0.006 +/- 0.0005

[Fri Oct  7 03:08:26 2011] Off-axis axis estimate = 8.95'
[Fri Oct  7 03:10:23 2011] Using EEF radius (= 3.54 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 03:10:23 2011] Initial guess for spatial extent in simple fitting = 3.54"
[Fri Oct  7 03:10:23 2011] source mask rpix=7.2, npix_max = 237, mask sum = 240, frac = 1.011
[Fri Oct  7 03:10:23 2011] Giving source the simple spatial ID 17 for pass 0, mean size = 3.54"
[Fri Oct  7 03:10:25 2011] fullrun_ccd6_acisf08936_pi14-548_cl_pass0_src17.ximg exists
[Fri Oct  7 03:10:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf08936_pi14-548_cl_pass0_src17.csv
[Fri Oct  7 03:10:25 2011] fullrun_ccd6_acisf08936_pi14-548_cl_pass0_src17_1.ximg exists
[Fri Oct  7 03:10:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf08936_pi14-548_cl_pass0_src17.csv
[Fri Oct  7 03:10:25 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf08936_pi14-548_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf08936_pi14-548_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 03:10:26 2011] fullrun_ccd6_acisf08936_pi14-548_cl_pass0_tfrozen_src17.ximg exists
[Fri Oct  7 03:10:26 2011] fullrun_ccd6_acisf08936_pi14-548_cl_pass0_tfrozen_src17_1.ximg exists
[Fri Oct  7 03:10:26 2011] Fit fullrun_ccd6_acisf08936_pi14-548_cl_pass0_tfrozen_src17 appears to have run properly
[Fri Oct  7 03:10:59 2011] Spatial fit model total counts = 231.996000, observed total counts = 232.000000
[Fri Oct  7 03:10:59 2011] Offset between fit and detection position for source 30 = 1.865366 pixels
[Fri Oct  7 03:10:59 2011] 231.242400 total counts/ 56.512400 bgd. counts: snr = 23.243183
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 1.865366 pixels
  Position = (295.6, 996.5) = 5 35 17.92 -5 29 34.6
  Extent = 4.2 (3.2-4.9)", rotation angle = 0
  Source counts = 174.7 +/- 15.2
  Background counts = 56.5
  Rate = 0.005 +/- 0.0004
[Fri Oct  7 03:10:59 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 03:10:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 03:10:59 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 03:10:59 2011] Source does appear to be extended
[Fri Oct  7 03:10:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 03:11:46 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 03:11:46 2011] Initial guess for spatial extent in simple fitting = 4.15"
[Fri Oct  7 03:11:46 2011] source mask rpix=8.4, npix_max = 319, mask sum = 306, frac = 0.958
[Fri Oct  7 03:11:46 2011] Giving source the simple spatial ID 17 for pass 1, mean size = 4.15"
[Fri Oct  7 03:11:47 2011] fullrun_ccd6_acisf08936_pi14-548_cl_pass1_src17.ximg exists
[Fri Oct  7 03:11:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf08936_pi14-548_cl_pass1_src17.csv
[Fri Oct  7 03:11:47 2011] fullrun_ccd6_acisf08936_pi14-548_cl_pass1_src17_1.ximg exists
[Fri Oct  7 03:11:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf08936_pi14-548_cl_pass1_src17.csv
[Fri Oct  7 03:11:47 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf08936_pi14-548_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf08936_pi14-548_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 03:11:50 2011] fullrun_ccd6_acisf08936_pi14-548_cl_pass1_tfrozen_src17.ximg exists
[Fri Oct  7 03:11:50 2011] fullrun_ccd6_acisf08936_pi14-548_cl_pass1_tfrozen_src17_1.ximg exists
[Fri Oct  7 03:11:50 2011] Fit fullrun_ccd6_acisf08936_pi14-548_cl_pass1_tfrozen_src17 appears to have run properly
[Fri Oct  7 03:12:24 2011] Spatial fit model total counts = 238.893000, observed total counts = 241.000000
[Fri Oct  7 03:12:24 2011] Offset between fit and detection position for source 30 = 1.510254 pixels
[Fri Oct  7 03:12:24 2011] 236.307870 total counts/ 6.702870 bgd. counts: snr = 88.685158
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 1.510254 pixels
  Position = (296.7, 997.5) = 5 35 17.88 -5 29 34.1
  Extent = 4.9 (4.4-5.2)", rotation angle = 0
  Source counts = 229.6 +/- 15.4
  Background counts = 6.7
  Rate = 0.007 +/- 0.0004
[Fri Oct  7 03:12:24 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 03:12:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 03:12:24 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 03:12:24 2011] Source does appear to be extended
[Fri Oct  7 03:12:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 03:16:34 2011] Not overwriting source region fullrun_ccd6_acisf08936_pi14-548_pass1_cl_src30_src.reg
[Fri Oct  7 03:16:34 2011] Extracting stamp from image fullrun_ccd6_acisf08936_pi14-548_cl_sm2.00.img.gz, (72, 773) - (521, 1119)
[Fri Oct  7 03:16:34 2011] Writing fullrun_ccd6_acisf08936_pi14-548_pass1_cl_src30.gif
[Fri Oct  7 03:17:20 2011] ../../acisf08936/products/events/fullrun_ccd6_acisf08936_pi14-548_pass1_cl_src30_src.evt and ../../acisf08936/products/events/fullrun_ccd6_acisf08936_pi14-548_pass1_cl_src30_bgd.evt exist, delete to re-create
[Fri Oct  7 03:17:20 2011] Size of ../../acisf08936/products/events/fullrun_ccd6_acisf08936_pi14-548_pass1_cl_src30_src.evt.gz[events] = 274 counts
[Fri Oct  7 03:17:20 2011] Mean chipx,y = (218.82, 98.22)
[Fri Oct  7 03:17:20 2011] Mean tdetx,y = (3093.82, 1800.22)
[Fri Oct  7 03:17:20 2011] chipx,y range = (173.00-268.00, 48.00-151.00)
[Fri Oct  7 03:17:20 2011] Size of ../../acisf08936/products/events/fullrun_ccd6_acisf08936_pi14-548_pass1_cl_src30_bgd.evt.gz[events] = 447 counts
[Fri Oct  7 03:17:20 2011] ../../acisf08936/products/images/fullrun_ccd6_acisf08936_pi14-548_pass1_cl_src30_src.img and ../../acisf08936/products/images/fullrun_ccd6_acisf08936_pi14-548_pass1_cl_src30_bgd.img exist, delete to re-create
[Fri Oct  7 03:17:20 2011] ../../acisf08936/products/spectra/fullrun_ccd6_acisf08936_pi14-548_pass1_cl_src30_src.pi and ../../acisf08936/products/spectra/fullrun_ccd6_acisf08936_pi14-548_pass1_cl_src30_bgd.pi exist, delete to re-create
[Fri Oct  7 03:17:22 2011] ../../acisf08936/products/lightcurves/fullrun_ccd6_acisf08936_pi14-548_pass1_cl_src30_src.lc and ../../acisf08936/products/lightcurves/fullrun_ccd6_acisf08936_pi14-548_pass1_cl_src30_bgd.lc exist, delete to re-create
[Fri Oct  7 03:20:16 2011] Keeping rmf generated by specextract
[Fri Oct  7 03:20:16 2011] 175.508
[Fri Oct  7 03:22:48 2011] Updating aperture counts using extracted products
[Fri Oct  7 03:22:48 2011] Error reading totcts from fullrun_ccd6_acisf08936_pi14-548_pass1_cl_src30_src.pi.gz
[Fri Oct  7 03:22:49 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 03:22:49 2011] Using photon index=1.80, rate=0.00661, arf fullrun_ccd6_acisf08936_pi14-548_pass1_cl_src30.arf
[Fri Oct  7 03:22:49 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 03:22:49 2011] Updating source flux to 8e-14