[Mon Oct 17 08:24:49 2011] Detection parameters:
  Position = (487.1, 490.2) = 18 19 35.41 -13 53 52.9
  Extent = 1.3" x 1.0", rotation angle = 1 degrees
  Source counts = 21.6 +/- 5.0
  Background counts = 3.4
  Rate = 0.0007 +/- 0.0002

[Mon Oct 17 08:24:50 2011] Off-axis axis estimate = 6.84'
[Mon Oct 17 08:25:48 2011] Using EEF radius (= 2.09 ")to estimate initial spatial extent for simple fitting
[Mon Oct 17 08:25:48 2011] Initial guess for spatial extent in simple fitting = 2.09"
[Mon Oct 17 08:25:48 2011] source mask rpix=4.2, npix_max = 89, mask sum = 100, frac = 1.114
[Mon Oct 17 08:25:48 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 2.09"
[Mon Oct 17 08:25:48 2011] fullrun_ccd3_acisf08932_pi14-548_cl_pass0_src15.ximg exists
[Mon Oct 17 08:25:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08932_pi14-548_cl_pass0_src15.csv
[Mon Oct 17 08:25:48 2011] fullrun_ccd3_acisf08932_pi14-548_cl_pass0_src15_1.ximg exists
[Mon Oct 17 08:25:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08932_pi14-548_cl_pass0_src15.csv
[Mon Oct 17 08:25:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08932_pi14-548_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08932_pi14-548_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 08:25:49 2011] fullrun_ccd3_acisf08932_pi14-548_cl_pass0_tfrozen_src15.ximg exists
[Mon Oct 17 08:25:49 2011] fullrun_ccd3_acisf08932_pi14-548_cl_pass0_tfrozen_src15_1.ximg exists
[Mon Oct 17 08:25:49 2011] Fit fullrun_ccd3_acisf08932_pi14-548_cl_pass0_tfrozen_src15 appears to have run properly
[Mon Oct 17 08:26:07 2011] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 24.237676 pixels away
[Mon Oct 17 08:26:07 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 08:26:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 08:26:07 2011] Assessing source extent using major
[Mon Oct 17 08:26:07 2011] Source does appear to be extended
[Mon Oct 17 08:26:07 2011] Computing asymmetry using major and minor axis, asym = 1.32
[Mon Oct 17 08:26:39 2011] Using EEF radius (= 2.09 ")to estimate initial spatial extent for simple fitting
[Mon Oct 17 08:26:39 2011] Initial guess for spatial extent in simple fitting = 2.09"
[Mon Oct 17 08:26:39 2011] source mask rpix=4.2, npix_max = 89, mask sum = 100, frac = 1.114
[Mon Oct 17 08:26:39 2011] Giving source the simple spatial ID 15 for pass 1, mean size = 2.09"
[Mon Oct 17 08:26:40 2011] fullrun_ccd3_acisf08932_pi14-548_cl_pass1_src15.ximg exists
[Mon Oct 17 08:26:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08932_pi14-548_cl_pass1_src15.csv
[Mon Oct 17 08:26:40 2011] fullrun_ccd3_acisf08932_pi14-548_cl_pass1_src15_1.ximg exists
[Mon Oct 17 08:26:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08932_pi14-548_cl_pass1_src15.csv
[Mon Oct 17 08:26:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08932_pi14-548_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08932_pi14-548_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 08:26:41 2011] fullrun_ccd3_acisf08932_pi14-548_cl_pass1_tfrozen_src15.ximg exists
[Mon Oct 17 08:26:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08932_pi14-548_cl_pass1_tfrozen_src15.csv
[Mon Oct 17 08:26:41 2011] fullrun_ccd3_acisf08932_pi14-548_cl_pass1_tfrozen_src15_1.ximg exists
[Mon Oct 17 08:26:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08932_pi14-548_cl_pass1_tfrozen_src15.csv
[Mon Oct 17 08:26:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08932_pi14-548_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08932_pi14-548_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 08:26:58 2011] Spatial fit model total counts = 25.991800, observed total counts = 29.000000
[Mon Oct 17 08:26:58 2011] Offset between fit and detection position for source 16 = 0.725110 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.725110 pixels
  Position = (487.8, 490.5) = 18 19 35.41 -13 53 53.0
  Extent = 1.7 (1.3-2.0)", rotation angle = 0
  Source counts = 26.3 +/- 5.1
  Background counts = 0.0
  Rate = 0.0009 +/- 0.0002
[Mon Oct 17 08:26:58 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 08:26:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 08:26:58 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 08:26:58 2011] Source does appear to be extended
[Mon Oct 17 08:26:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 08:32:42 2011] Not overwriting source region fullrun_ccd3_acisf08932_pi14-548_pass1_cl_src16_src.reg
[Mon Oct 17 08:32:42 2011] Extracting stamp from image fullrun_ccd3_acisf08932_pi14-548_cl_sm2.00.img.gz, (410, 412) - (566, 569)
[Mon Oct 17 08:32:42 2011] Writing fullrun_ccd3_acisf08932_pi14-548_pass1_cl_src16.gif
[Mon Oct 17 08:33:24 2011] ../../acisf08932/products/events/fullrun_ccd3_acisf08932_pi14-548_pass1_cl_src16_src.evt and ../../acisf08932/products/events/fullrun_ccd3_acisf08932_pi14-548_pass1_cl_src16_bgd.evt exist, delete to re-create
[Mon Oct 17 08:33:24 2011] Size of ../../acisf08932/products/events/fullrun_ccd3_acisf08932_pi14-548_pass1_cl_src16_src.evt.gz[events] = 27 counts
[Mon Oct 17 08:33:24 2011] Mean chipx,y = (605.19, 256.56)
[Mon Oct 17 08:33:24 2011] Mean tdetx,y = (4875.44, 3666.19)
[Mon Oct 17 08:33:24 2011] chipx,y range = (586.00-626.00, 243.00-286.00)
[Mon Oct 17 08:33:24 2011] Size of ../../acisf08932/products/events/fullrun_ccd3_acisf08932_pi14-548_pass1_cl_src16_bgd.evt.gz[events] = 70 counts
[Mon Oct 17 08:33:24 2011] ../../acisf08932/products/images/fullrun_ccd3_acisf08932_pi14-548_pass1_cl_src16_src.img and ../../acisf08932/products/images/fullrun_ccd3_acisf08932_pi14-548_pass1_cl_src16_bgd.img exist, delete to re-create
[Mon Oct 17 08:33:24 2011] ../../acisf08932/products/spectra/fullrun_ccd3_acisf08932_pi14-548_pass1_cl_src16_src.pi and ../../acisf08932/products/spectra/fullrun_ccd3_acisf08932_pi14-548_pass1_cl_src16_bgd.pi exist, delete to re-create
[Mon Oct 17 08:33:24 2011] Not generating rmf since there are only 26 counts
[Mon Oct 17 08:33:26 2011] ../../acisf08932/products/lightcurves/fullrun_ccd3_acisf08932_pi14-548_pass1_cl_src16_src.lc and ../../acisf08932/products/lightcurves/fullrun_ccd3_acisf08932_pi14-548_pass1_cl_src16_bgd.lc exist, delete to re-create
[Mon Oct 17 08:34:48 2011] 178.108
[Mon Oct 17 08:34:55 2011] Updating aperture counts using extracted products
[Mon Oct 17 08:34:55 2011] Error reading totcts from fullrun_ccd3_acisf08932_pi14-548_pass1_cl_src16_src.pi.gz
[Mon Oct 17 08:34:56 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 17 08:34:56 2011] Using photon index=1.80, rate=0.000874, arf fullrun_ccd3_acisf08932_pi14-548_pass1_cl_src16.arf
[Mon Oct 17 08:34:56 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 17 08:34:56 2011] Updating source flux to 1.4e-14
[Mon Oct 17 08:35:10 2011] Source 16 has fewer than 100.000000 counts, skipping spectral fitting