[Mon Oct 17 08:24:48 2011] Detection parameters:
  Position = (455.4, 1017.3) = 18 19 36.48 -13 49 33.6
  Extent = 0.5" x 0.5", rotation angle = 98 degrees
  Source counts = 320.3 +/- 17.9
  Background counts = 1.7
  Rate = 0.01 +/- 0.0006

[Mon Oct 17 08:24:50 2011] Off-axis axis estimate = 2.56'
[Mon Oct 17 08:25:48 2011] Using EEF radius (= 0.50 ")to estimate initial spatial extent for simple fitting
[Mon Oct 17 08:25:48 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 17 08:25:48 2011] Initial guess for spatial extent in simple fitting = 0.50"
[Mon Oct 17 08:25:48 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.976
[Mon Oct 17 08:25:48 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.50"
[Mon Oct 17 08:25:48 2011] fullrun_ccd3_acisf08932_pi14-548_cl_pass0_src1.ximg exists
[Mon Oct 17 08:25:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08932_pi14-548_cl_pass0_src1.csv
[Mon Oct 17 08:25:48 2011] fullrun_ccd3_acisf08932_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Oct 17 08:25:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08932_pi14-548_cl_pass0_src1.csv
[Mon Oct 17 08:25:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08932_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08932_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 08:25:49 2011] fullrun_ccd3_acisf08932_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Oct 17 08:25:49 2011] fullrun_ccd3_acisf08932_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Oct 17 08:25:49 2011] Fit fullrun_ccd3_acisf08932_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Oct 17 08:26:07 2011] Spatial fit model total counts = 326.913000, observed total counts = 327.000000
[Mon Oct 17 08:26:07 2011] Offset between fit and detection position for source 1 = 0.686348 pixels
[Mon Oct 17 08:26:07 2011] 327.519510 total counts/ 8.697510 bgd. counts: snr = 108.106253
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.686348 pixels
  Position = (455.9, 1017.8) = 18 19 36.49 -13 49 33.6
  Extent = 0.5 (0.5-0.5)", rotation angle = 0
  Source counts = 318.8 +/- 18.1
  Background counts = 8.7
  Rate = 0.01 +/- 0.0006
[Mon Oct 17 08:26:07 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 08:26:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 08:26:07 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 08:26:07 2011] Source does appear to be extended
[Mon Oct 17 08:26:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 08:26:39 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 17 08:26:39 2011] Initial guess for spatial extent in simple fitting = 0.48"
[Mon Oct 17 08:26:39 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.025
[Mon Oct 17 08:26:39 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.48"
[Mon Oct 17 08:26:40 2011] fullrun_ccd3_acisf08932_pi14-548_cl_pass1_src1.ximg exists
[Mon Oct 17 08:26:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08932_pi14-548_cl_pass1_src1.csv
[Mon Oct 17 08:26:40 2011] fullrun_ccd3_acisf08932_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Oct 17 08:26:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08932_pi14-548_cl_pass1_src1.csv
[Mon Oct 17 08:26:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08932_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08932_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 08:26:40 2011] fullrun_ccd3_acisf08932_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Oct 17 08:26:40 2011] fullrun_ccd3_acisf08932_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Oct 17 08:26:40 2011] Fit fullrun_ccd3_acisf08932_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Oct 17 08:26:58 2011] Spatial fit model total counts = 326.989000, observed total counts = 327.000000
[Mon Oct 17 08:26:58 2011] Offset between fit and detection position for source 1 = 0.001491 pixels
[Mon Oct 17 08:26:58 2011] 327.467700 total counts/ 8.709700 bgd. counts: snr = 108.008888
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.001491 pixels
  Position = (455.9, 1017.8) = 18 19 36.49 -13 49 33.6
  Extent = 0.5 (0.5-0.5)", rotation angle = 0
  Source counts = 318.8 +/- 18.1
  Background counts = 8.7
  Rate = 0.01 +/- 0.0006
[Mon Oct 17 08:26:58 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 08:26:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 08:26:58 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 08:26:58 2011] Source does appear to be extended
[Mon Oct 17 08:26:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 08:32:41 2011] Not overwriting source region fullrun_ccd3_acisf08932_pi14-548_pass1_cl_src1_src.reg
[Mon Oct 17 08:32:41 2011] Extracting stamp from image fullrun_ccd3_acisf08932_pi14-548_cl_sm2.00.img.gz, (434, 996) - (478, 1040)
[Mon Oct 17 08:32:41 2011] Writing fullrun_ccd3_acisf08932_pi14-548_pass1_cl_src1.gif
[Mon Oct 17 08:32:44 2011] ../../acisf08932/products/events/fullrun_ccd3_acisf08932_pi14-548_pass1_cl_src1_src.evt and ../../acisf08932/products/events/fullrun_ccd3_acisf08932_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Mon Oct 17 08:32:44 2011] Size of ../../acisf08932/products/events/fullrun_ccd3_acisf08932_pi14-548_pass1_cl_src1_src.evt.gz[events] = 321 counts
[Mon Oct 17 08:32:44 2011] Mean chipx,y = (869.16, 722.96)
[Mon Oct 17 08:32:44 2011] Mean tdetx,y = (4409.04, 3930.16)
[Mon Oct 17 08:32:44 2011] chipx,y range = (851.00-886.00, 704.00-739.00)
[Mon Oct 17 08:32:44 2011] Size of ../../acisf08932/products/events/fullrun_ccd3_acisf08932_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 19 counts
[Mon Oct 17 08:32:44 2011] ../../acisf08932/products/images/fullrun_ccd3_acisf08932_pi14-548_pass1_cl_src1_src.img and ../../acisf08932/products/images/fullrun_ccd3_acisf08932_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Mon Oct 17 08:32:44 2011] ../../acisf08932/products/spectra/fullrun_ccd3_acisf08932_pi14-548_pass1_cl_src1_src.pi and ../../acisf08932/products/spectra/fullrun_ccd3_acisf08932_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Mon Oct 17 08:32:47 2011] ../../acisf08932/products/lightcurves/fullrun_ccd3_acisf08932_pi14-548_pass1_cl_src1_src.lc and ../../acisf08932/products/lightcurves/fullrun_ccd3_acisf08932_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Mon Oct 17 08:34:47 2011] Keeping rmf generated by specextract
[Mon Oct 17 08:34:47 2011] 199.629
[Mon Oct 17 08:34:55 2011] Updating aperture counts using extracted products
[Mon Oct 17 08:34:55 2011] Error reading totcts from fullrun_ccd3_acisf08932_pi14-548_pass1_cl_src1_src.pi.gz
[Mon Oct 17 08:34:55 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 17 08:34:55 2011] Using photon index=1.80, rate=0.0106, arf fullrun_ccd3_acisf08932_pi14-548_pass1_cl_src1.arf
[Mon Oct 17 08:34:55 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 17 08:34:55 2011] Updating source flux to 1.6e-13
[Mon Oct 17 08:35:20 2011] Reading fit data from acisf08932/analysis//spectral/fullrun_ccd3_acisf08932_pi14-548_pass1_cl_src1_pl.csv
[Mon Oct 17 08:35:20 2011] Spectral fit parameter nH value = 9.46406e+20
[Mon Oct 17 08:35:20 2011] Spectral fit parameter PhoIndex value = 1.42819
[Mon Oct 17 08:35:20 2011] Failed to get F(0.3-8.0) from acisf08932/analysis//spectral/fullrun_ccd3_acisf08932_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Oct 17 08:35:20 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 17 08:35:20 2011] Using Nh = 9.5e+20, photon index=1.43, rate=0.0106, arf fullrun_ccd3_acisf08932_pi14-548_pass1_cl_src1.arf
[Mon Oct 17 08:35:20 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 17 08:35:20 2011] Updating source flux to 1.4e-13