[Mon Oct 17 08:24:44 2011] Detection parameters:
  Position = (82.6, 511.0) = 18 19 33.88 -13 46 13.5
  Extent = 0.6" x 0.5", rotation angle = 54 degrees
  Source counts = 16.0 +/- 4.1
  Background counts = 1.0
  Rate = 0.0005 +/- 0.0001

[Mon Oct 17 08:24:48 2011] Off-axis axis estimate = 0.84'
[Mon Oct 17 08:25:43 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Mon Oct 17 08:25:43 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Mon Oct 17 08:25:43 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.923
[Mon Oct 17 08:25:43 2011] Giving source the simple spatial ID 37 for pass 0, mean size = 0.38"
[Mon Oct 17 08:25:46 2011] fullrun_ccd2_acisf08932_pi14-548_cl_pass0_src37.ximg exists
[Mon Oct 17 08:25:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08932_pi14-548_cl_pass0_src37.csv
[Mon Oct 17 08:25:46 2011] fullrun_ccd2_acisf08932_pi14-548_cl_pass0_src37_1.ximg exists
[Mon Oct 17 08:25:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08932_pi14-548_cl_pass0_src37.csv
[Mon Oct 17 08:25:46 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf08932_pi14-548_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf08932_pi14-548_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 08:25:47 2011] fullrun_ccd2_acisf08932_pi14-548_cl_pass0_tfrozen_src37.ximg exists
[Mon Oct 17 08:25:47 2011] fullrun_ccd2_acisf08932_pi14-548_cl_pass0_tfrozen_src37_1.ximg exists
[Mon Oct 17 08:25:47 2011] Fit fullrun_ccd2_acisf08932_pi14-548_cl_pass0_tfrozen_src37 appears to have run properly
[Mon Oct 17 08:26:04 2011] Spatial fit model total counts = 19.684200, observed total counts = 19.000000
[Mon Oct 17 08:26:04 2011] Offset between fit and detection position for source 17 = 1.033201 pixels
[Mon Oct 17 08:26:04 2011] 19.314980 total counts/ 3.903980 bgd. counts: snr = 7.799684
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 1.033201 pixels
  Position = (83.3, 511.8) = 18 19 33.87 -13 46 13.3
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 15.4 +/- 4.4
  Background counts = 3.9
  Rate = 0.0005 +/- 0.0001
[Mon Oct 17 08:26:04 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 08:26:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 08:26:04 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 08:26:04 2011] Source does appear to be extended
[Mon Oct 17 08:26:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 08:26:34 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 17 08:26:34 2011] Initial guess for spatial extent in simple fitting = 0.43"
[Mon Oct 17 08:26:34 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.197
[Mon Oct 17 08:26:34 2011] Giving source the simple spatial ID 37 for pass 1, mean size = 0.43"
[Mon Oct 17 08:26:38 2011] fullrun_ccd2_acisf08932_pi14-548_cl_pass1_src37.ximg exists
[Mon Oct 17 08:26:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08932_pi14-548_cl_pass1_src37.csv
[Mon Oct 17 08:26:38 2011] fullrun_ccd2_acisf08932_pi14-548_cl_pass1_src37_1.ximg exists
[Mon Oct 17 08:26:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08932_pi14-548_cl_pass1_src37.csv
[Mon Oct 17 08:26:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf08932_pi14-548_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf08932_pi14-548_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 08:26:39 2011] fullrun_ccd2_acisf08932_pi14-548_cl_pass1_tfrozen_src37.ximg exists
[Mon Oct 17 08:26:39 2011] fullrun_ccd2_acisf08932_pi14-548_cl_pass1_tfrozen_src37_1.ximg exists
[Mon Oct 17 08:26:39 2011] Fit fullrun_ccd2_acisf08932_pi14-548_cl_pass1_tfrozen_src37 appears to have run properly
[Mon Oct 17 08:26:55 2011] Spatial fit model total counts = 19.757100, observed total counts = 20.000000
[Mon Oct 17 08:26:55 2011] Offset between fit and detection position for source 17 = 0.032051 pixels
[Mon Oct 17 08:26:55 2011] 19.251410 total counts/ 5.093910 bgd. counts: snr = 6.272793
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.032051 pixels
  Position = (83.3, 511.8) = 18 19 33.87 -13 46 13.3
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 14.2 +/- 4.4
  Background counts = 5.1
  Rate = 0.0005 +/- 0.0001
[Mon Oct 17 08:26:55 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 08:26:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 08:26:55 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 08:26:55 2011] Source does appear to be extended
[Mon Oct 17 08:26:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 08:28:54 2011] Not overwriting source region fullrun_ccd2_acisf08932_pi14-548_pass1_cl_src17_src.reg
[Mon Oct 17 08:28:54 2011] Extracting stamp from image fullrun_ccd2_acisf08932_pi14-548_cl_sm2.00.img.gz, (65, 494) - (101, 530)
[Mon Oct 17 08:28:54 2011] Writing fullrun_ccd2_acisf08932_pi14-548_pass1_cl_src17.gif
[Mon Oct 17 08:30:43 2011] ../../acisf08932/products/events/fullrun_ccd2_acisf08932_pi14-548_pass1_cl_src17_src.evt and ../../acisf08932/products/events/fullrun_ccd2_acisf08932_pi14-548_pass1_cl_src17_bgd.evt exist, delete to re-create
[Mon Oct 17 08:30:43 2011] Size of ../../acisf08932/products/events/fullrun_ccd2_acisf08932_pi14-548_pass1_cl_src17_src.evt.gz[events] = 16 counts
[Mon Oct 17 08:30:43 2011] Mean chipx,y = (44.12, 956.25)
[Mon Oct 17 08:30:43 2011] Mean tdetx,y = (4017.25, 4041.88)
[Mon Oct 17 08:30:43 2011] chipx,y range = (29.00-63.00, 934.00-967.00)
[Mon Oct 17 08:30:43 2011] Size of ../../acisf08932/products/events/fullrun_ccd2_acisf08932_pi14-548_pass1_cl_src17_bgd.evt.gz[events] = 7 counts
[Mon Oct 17 08:30:43 2011] ../../acisf08932/products/images/fullrun_ccd2_acisf08932_pi14-548_pass1_cl_src17_src.img and ../../acisf08932/products/images/fullrun_ccd2_acisf08932_pi14-548_pass1_cl_src17_bgd.img exist, delete to re-create
[Mon Oct 17 08:30:43 2011] ../../acisf08932/products/spectra/fullrun_ccd2_acisf08932_pi14-548_pass1_cl_src17_src.pi and ../../acisf08932/products/spectra/fullrun_ccd2_acisf08932_pi14-548_pass1_cl_src17_bgd.pi exist, delete to re-create
[Mon Oct 17 08:30:43 2011] Not generating rmf since there are only 14 counts
[Mon Oct 17 08:30:45 2011] ../../acisf08932/products/lightcurves/fullrun_ccd2_acisf08932_pi14-548_pass1_cl_src17_src.lc and ../../acisf08932/products/lightcurves/fullrun_ccd2_acisf08932_pi14-548_pass1_cl_src17_bgd.lc exist, delete to re-create
[Mon Oct 17 08:32:40 2011] 202.063
[Mon Oct 17 08:34:54 2011] Updating aperture counts using extracted products
[Mon Oct 17 08:34:54 2011] Error reading totcts from fullrun_ccd2_acisf08932_pi14-548_pass1_cl_src17_src.pi.gz
[Mon Oct 17 08:34:55 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 17 08:34:55 2011] Using photon index=1.80, rate=0.000469, arf fullrun_ccd2_acisf08932_pi14-548_pass1_cl_src17.arf
[Mon Oct 17 08:34:55 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 17 08:34:55 2011] Updating source flux to 6.9e-15
[Mon Oct 17 08:35:02 2011] Source 17 has fewer than 100.000000 counts, skipping spectral fitting