[Mon Oct 17 08:24:43 2011] Detection parameters:
  Position = (993.0, 636.3) = 18 19 3.14 -13 45 11.7
  Extent = 2.4" x 1.8", rotation angle = 88 degrees
  Source counts = 165.8 +/- 13.7
  Background counts = 23.2
  Rate = 0.005 +/- 0.0005

[Mon Oct 17 08:24:48 2011] Off-axis axis estimate = 7.86'
[Mon Oct 17 08:25:43 2011] Using EEF radius (= 2.73 ")to estimate initial spatial extent for simple fitting
[Mon Oct 17 08:25:43 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 17 08:25:43 2011] Initial guess for spatial extent in simple fitting = 2.73"
[Mon Oct 17 08:25:43 2011] source mask rpix=5.6, npix_max = 146, mask sum = 144, frac = 0.981
[Mon Oct 17 08:25:43 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.73"
[Mon Oct 17 08:25:44 2011] fullrun_ccd2_acisf08932_pi14-548_cl_pass0_src1.ximg exists
[Mon Oct 17 08:25:44 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf08932_pi14-548_cl_pass0_src1.csv
[Mon Oct 17 08:25:44 2011] fullrun_ccd2_acisf08932_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Oct 17 08:25:44 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf08932_pi14-548_cl_pass0_src1.csv
[Mon Oct 17 08:25:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf08932_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf08932_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 08:25:46 2011] fullrun_ccd2_acisf08932_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Oct 17 08:25:46 2011] fullrun_ccd2_acisf08932_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Oct 17 08:25:46 2011] Fit fullrun_ccd2_acisf08932_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Oct 17 08:26:04 2011] Spatial fit model total counts = 208.640000, observed total counts = 210.000000
[Mon Oct 17 08:26:04 2011] Offset between fit and detection position for source 1 = 0.276889 pixels
[Mon Oct 17 08:26:04 2011] 208.734000 total counts/ 47.204000 bgd. counts: snr = 23.510604
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.276889 pixels
  Position = (993.2, 636.6) = 18 19 3.15 -13 45 11.8
  Extent = 2.3 (2.0-2.6)", rotation angle = 0
  Source counts = 161.5 +/- 14.4
  Background counts = 47.2
  Rate = 0.005 +/- 0.0005
[Mon Oct 17 08:26:04 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 08:26:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 08:26:04 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 08:26:04 2011] Source does appear to be extended
[Mon Oct 17 08:26:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 08:26:34 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 17 08:26:34 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 17 08:26:34 2011] Initial guess for spatial extent in simple fitting = 2.30"
[Mon Oct 17 08:26:34 2011] source mask rpix=4.7, npix_max = 106, mask sum = 110, frac = 1.029
[Mon Oct 17 08:26:34 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.30"
[Mon Oct 17 08:26:37 2011] fullrun_ccd2_acisf08932_pi14-548_cl_pass1_src1.ximg exists
[Mon Oct 17 08:26:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08932_pi14-548_cl_pass1_src1.csv
[Mon Oct 17 08:26:37 2011] fullrun_ccd2_acisf08932_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Oct 17 08:26:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08932_pi14-548_cl_pass1_src1.csv
[Mon Oct 17 08:26:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf08932_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf08932_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 08:26:38 2011] fullrun_ccd2_acisf08932_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Oct 17 08:26:38 2011] fullrun_ccd2_acisf08932_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Oct 17 08:26:38 2011] Fit fullrun_ccd2_acisf08932_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Oct 17 08:26:55 2011] Spatial fit model total counts = 196.359000, observed total counts = 197.000000
[Mon Oct 17 08:26:55 2011] Offset between fit and detection position for source 1 = 0.085599 pixels
[Mon Oct 17 08:26:55 2011] 196.547800 total counts/ 36.225800 bgd. counts: snr = 26.636928
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.085599 pixels
  Position = (993.2, 636.5) = 18 19 3.15 -13 45 11.9
  Extent = 2.3 (2.0-2.7)", rotation angle = 0
  Source counts = 160.3 +/- 14.0
  Background counts = 36.2
  Rate = 0.005 +/- 0.0005
[Mon Oct 17 08:26:55 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 08:26:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 08:26:55 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 08:26:55 2011] Source does appear to be extended
[Mon Oct 17 08:26:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 08:28:53 2011] Not overwriting source region fullrun_ccd2_acisf08932_pi14-548_pass1_cl_src1_src.reg
[Mon Oct 17 08:28:53 2011] Extracting stamp from image fullrun_ccd2_acisf08932_pi14-548_cl_sm2.00.img.gz, (889, 532) - (1098, 741)
[Mon Oct 17 08:28:53 2011] Writing fullrun_ccd2_acisf08932_pi14-548_pass1_cl_src1.gif
[Mon Oct 17 08:28:59 2011] ../../acisf08932/products/events/fullrun_ccd2_acisf08932_pi14-548_pass1_cl_src1_src.evt and ../../acisf08932/products/events/fullrun_ccd2_acisf08932_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Mon Oct 17 08:28:59 2011] Size of ../../acisf08932/products/events/fullrun_ccd2_acisf08932_pi14-548_pass1_cl_src1_src.evt.gz[events] = 192 counts
[Mon Oct 17 08:28:59 2011] Mean chipx,y = (809.05, 433.42)
[Mon Oct 17 08:28:59 2011] Mean tdetx,y = (3494.42, 3276.95)
[Mon Oct 17 08:28:59 2011] chipx,y range = (783.00-841.00, 406.00-460.00)
[Mon Oct 17 08:28:59 2011] Size of ../../acisf08932/products/events/fullrun_ccd2_acisf08932_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 178 counts
[Mon Oct 17 08:28:59 2011] ../../acisf08932/products/images/fullrun_ccd2_acisf08932_pi14-548_pass1_cl_src1_src.img and ../../acisf08932/products/images/fullrun_ccd2_acisf08932_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Mon Oct 17 08:28:59 2011] ../../acisf08932/products/spectra/fullrun_ccd2_acisf08932_pi14-548_pass1_cl_src1_src.pi and ../../acisf08932/products/spectra/fullrun_ccd2_acisf08932_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Mon Oct 17 08:29:02 2011] ../../acisf08932/products/lightcurves/fullrun_ccd2_acisf08932_pi14-548_pass1_cl_src1_src.lc and ../../acisf08932/products/lightcurves/fullrun_ccd2_acisf08932_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Mon Oct 17 08:32:39 2011] Keeping rmf generated by specextract
[Mon Oct 17 08:32:39 2011] 161.077
[Mon Oct 17 08:34:53 2011] Updating aperture counts using extracted products
[Mon Oct 17 08:34:53 2011] Error reading totcts from fullrun_ccd2_acisf08932_pi14-548_pass1_cl_src1_src.pi.gz
[Mon Oct 17 08:34:54 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 17 08:34:54 2011] Using photon index=1.80, rate=0.00532, arf fullrun_ccd2_acisf08932_pi14-548_pass1_cl_src1.arf
[Mon Oct 17 08:34:54 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 17 08:34:54 2011] Updating source flux to 9.3e-14
[Mon Oct 17 08:35:10 2011] Reading fit data from acisf08932/analysis//spectral/fullrun_ccd2_acisf08932_pi14-548_pass1_cl_src1_pl.csv
[Mon Oct 17 08:35:10 2011] Spectral fit parameter nH value = 4.22582e+21
[Mon Oct 17 08:35:10 2011] Spectral fit parameter PhoIndex value = 2.30956
[Mon Oct 17 08:35:10 2011] Failed to get F(0.3-8.0) from acisf08932/analysis//spectral/fullrun_ccd2_acisf08932_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Oct 17 08:35:10 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 17 08:35:10 2011] Using Nh = 4.2e+21, photon index=2.31, rate=0.00532, arf fullrun_ccd2_acisf08932_pi14-548_pass1_cl_src1.arf
[Mon Oct 17 08:35:10 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 17 08:35:10 2011] Updating source flux to 6.4e-14