[Mon Oct 31 21:14:53 2011] Detection parameters:
  Position = (55.5, 708.5) = 3 30 17.39 -52 34 8.7
  Extent = 0.5" x 0.5", rotation angle = 165 degrees
  Source counts = 202.2 +/- 14.3
  Background counts = 1.8
  Rate = 0.01 +/- 0.0007

[Mon Oct 31 21:14:54 2011] Off-axis axis estimate = 2.38'
[Mon Oct 31 21:15:38 2011] Using EEF radius (= 0.48 ")to estimate initial spatial extent for simple fitting
[Mon Oct 31 21:15:38 2011] Initial guess for spatial extent in simple fitting = 0.48"
[Mon Oct 31 21:15:38 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.047
[Mon Oct 31 21:15:38 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.48"
[Mon Oct 31 21:15:38 2011] fullrun_ccd2_acisf00893_pi14-548_cl_pass0_src3.ximg exists
[Mon Oct 31 21:15:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00893_pi14-548_cl_pass0_src3.csv
[Mon Oct 31 21:15:38 2011] fullrun_ccd2_acisf00893_pi14-548_cl_pass0_src3_1.ximg exists
[Mon Oct 31 21:15:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00893_pi14-548_cl_pass0_src3.csv
[Mon Oct 31 21:15:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf00893_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf00893_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 21:15:38 2011] fullrun_ccd2_acisf00893_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Mon Oct 31 21:15:38 2011] fullrun_ccd2_acisf00893_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Oct 31 21:15:38 2011] Fit fullrun_ccd2_acisf00893_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Oct 31 21:15:46 2011] Spatial fit model total counts = 204.143000, observed total counts = 208.000000
[Mon Oct 31 21:15:46 2011] Offset between fit and detection position for source 3 = 0.648313 pixels
[Mon Oct 31 21:15:46 2011] 205.377750 total counts/ 7.046750 bgd. counts: snr = 74.712999
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.648313 pixels
  Position = (56.0, 709.0) = 3 30 17.40 -52 34 8.8
  Extent = 0.5 (0.5-0.6)", rotation angle = 0
  Source counts = 198.3 +/- 14.3
  Background counts = 7.0
  Rate = 0.01 +/- 0.0007
[Mon Oct 31 21:15:46 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 21:15:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 21:15:46 2011] Assessing source extent using major axis lower bound
[Mon Oct 31 21:15:46 2011] Source does appear to be extended
[Mon Oct 31 21:15:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 31 21:16:05 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 31 21:16:05 2011] Initial guess for spatial extent in simple fitting = 0.53"
[Mon Oct 31 21:16:05 2011] source mask rpix=1.1, npix_max = 9, mask sum = 16, frac = 1.609
[Mon Oct 31 21:16:05 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.53"
[Mon Oct 31 21:16:06 2011] fullrun_ccd2_acisf00893_pi14-548_cl_pass1_src3.ximg exists
[Mon Oct 31 21:16:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00893_pi14-548_cl_pass1_src3.csv
[Mon Oct 31 21:16:06 2011] fullrun_ccd2_acisf00893_pi14-548_cl_pass1_src3_1.ximg exists
[Mon Oct 31 21:16:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00893_pi14-548_cl_pass1_src3.csv
[Mon Oct 31 21:16:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf00893_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf00893_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 21:16:06 2011] fullrun_ccd2_acisf00893_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Mon Oct 31 21:16:06 2011] fullrun_ccd2_acisf00893_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Oct 31 21:16:06 2011] Fit fullrun_ccd2_acisf00893_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Oct 31 21:16:13 2011] Spatial fit model total counts = 202.858000, observed total counts = 207.000000
[Mon Oct 31 21:16:13 2011] Offset between fit and detection position for source 3 = 0.008445 pixels
[Mon Oct 31 21:16:13 2011] 203.489860 total counts/ 7.441860 bgd. counts: snr = 71.865701
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.008445 pixels
  Position = (56.0, 709.0) = 3 30 17.39 -52 34 8.8
  Extent = 0.5 (0.5-0.6)", rotation angle = 0
  Source counts = 196.0 +/- 14.3
  Background counts = 7.4
  Rate = 0.01 +/- 0.0007
[Mon Oct 31 21:16:13 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 21:16:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 21:16:13 2011] Assessing source extent using major axis lower bound
[Mon Oct 31 21:16:13 2011] Source does appear to be extended
[Mon Oct 31 21:16:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 31 21:17:31 2011] Not overwriting source region fullrun_ccd2_acisf00893_pi14-548_pass1_cl_src3_src.reg
[Mon Oct 31 21:17:31 2011] Extracting stamp from image fullrun_ccd2_acisf00893_pi14-548_cl_sm2.00.img.gz, (32, 685) - (80, 733)
[Mon Oct 31 21:17:31 2011] Writing fullrun_ccd2_acisf00893_pi14-548_pass1_cl_src3.gif
[Mon Oct 31 21:17:38 2011] ../../acisf00893/products/events/fullrun_ccd2_acisf00893_pi14-548_pass1_cl_src3_src.evt and ../../acisf00893/products/events/fullrun_ccd2_acisf00893_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Mon Oct 31 21:17:38 2011] Size of ../../acisf00893/products/events/fullrun_ccd2_acisf00893_pi14-548_pass1_cl_src3_src.evt.gz[events] = 202 counts
[Mon Oct 31 21:17:38 2011] Mean chipx,y = (328.77, 984.25)
[Mon Oct 31 21:17:38 2011] Mean tdetx,y = (4045.25, 3757.23)
[Mon Oct 31 21:17:38 2011] chipx,y range = (312.00-348.00, 966.00-1001.00)
[Mon Oct 31 21:17:38 2011] Size of ../../acisf00893/products/events/fullrun_ccd2_acisf00893_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 10 counts
[Mon Oct 31 21:17:38 2011] ../../acisf00893/products/images/fullrun_ccd2_acisf00893_pi14-548_pass1_cl_src3_src.img and ../../acisf00893/products/images/fullrun_ccd2_acisf00893_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Mon Oct 31 21:17:38 2011] ../../acisf00893/products/spectra/fullrun_ccd2_acisf00893_pi14-548_pass1_cl_src3_src.pi and ../../acisf00893/products/spectra/fullrun_ccd2_acisf00893_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Mon Oct 31 21:17:41 2011] ../../acisf00893/products/lightcurves/fullrun_ccd2_acisf00893_pi14-548_pass1_cl_src3_src.lc and ../../acisf00893/products/lightcurves/fullrun_ccd2_acisf00893_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Mon Oct 31 21:18:00 2011] Keeping rmf generated by specextract
[Mon Oct 31 21:18:00 2011] 197.046
[Mon Oct 31 21:18:53 2011] Updating aperture counts using extracted products
[Mon Oct 31 21:18:53 2011] Error reading totcts from fullrun_ccd2_acisf00893_pi14-548_pass1_cl_src3_src.pi.gz
[Mon Oct 31 21:18:53 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 31 21:18:53 2011] Using photon index=1.80, rate=0.01, arf fullrun_ccd2_acisf00893_pi14-548_pass1_cl_src3.arf
[Mon Oct 31 21:18:53 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 31 21:18:53 2011] Updating source flux to 1e-13